Ironman Fitness 320t Owner's Manual page 9

Assembly
9. Remove the two Long Bumpers from base of treadmill as shown in Figure 7a. Install the Left and Right
Fender to Base using Philip Screw ST4.2X16 as shown in Figure 7b. Reinstall both Long Bumpers.
BASE
Figure 7a: Long Bumper Removal
Congratulations!
You have completed the assembly of your new Ironman 320t Treadmill!
ALLEN BOLT M8*30
LONG BUMPER
BASE
LEFT FENDER
Figure 7b: Left and Right Fender Installation
9
RIGHT FENDER
PHILIP SCREW
ST4.2x16