Image Viewer; Adding Image File To Player - IRiver T10 Instruction Manual

Basic operation
BROWSER/IMAGE VIEWER

IMAGE VIEWER

1 While BROWSER mode, select a image file by
using the ,
Press the button to to view .
: to go the upper folder
, : to select a file
: to execute image viewer
Note
Image file may not display if file is damaged.
Only 4/8/16/24 bit Mono/Color BMP file can be displayed.
RLE type BMP file is not supported.

Adding image file to player

1. Connect the player and PC using the cable supplied with the player and power it
on.
(Refer to page 12.)
2. Open "Start - My Computer".
29
, , button.
: to go the sub folder
Basic operation
BROWSER/IMAGE VIEWER
3. Locate your image files(BMP), usually
found in "My Documents" then "My
Pictures", keep this folder open.
5. To get images on the player, drag and
drop the image files from your PC to
the "Dara" folder on the iriver T10.
7. Disconnect the USB cable once all copying has finished.
4. Open a second My Computer window.
Double click on the iriver T10 device.
6. A progress window will appear while
files are copying.
30