General; Location Of Controls - Sony CDX-GT420U Service Manual

CDX-GT420U/GT424U/GT427UE/GT470U/GT470US

• LOCATION OF CONTROLS

• CDX-GT420U: US model
Location of controls and basic operations
Main unit
OFF
BROWSE
PUSH ENTER / SELECT
SOURCE
SEEK SEEK
BACK
MODE
EQ3 BTM 1
Card remote commander
RM-X151
OFF ATT
SOURCE SEL MODE
+
–
DSPL SCRL
1 3
2
4 6
5
+
VOL
–
6
• CDX-GT420U: AEP, UK, Russian model/GT424U/GT427UE
Location of controls and basic operations
Main unit
OFF
BROWSE
PUSH ENTER /SELECT
SOURCE
SEEK SEEK
BACK
MODE
PTY
EQ3 AF/TA 1
Card remote commander
RM-X151
OFF ATT
SOURCE SEL MODE
+
–
DSPL SCRL
1 3
2
4 6
5
+
VOL
–
6
6
SECTION 2
ALBUM R E P S H U F DM PAUSE S C R L
2 3 4 5 6 DSPL
AUX
This section contains instructions on the location
of controls and basic operations. For details, see
the respective pages.
For USB device operation, see "USB devices" on
page 10.
The corresponding buttons on the card remote
commander control the same functions as those
on the unit.
OFF button
To power off; stop the source.
(BROWSE) button page 8
To enter the Quick-BrowZer mode.
Control dial/select button page 8, 11
To adjust volume/select search category
(rotate); select setup items (press and rotate).
SOURCE button
To power on; change the source (Radio/CD/
USB/AUX).
Disc slot
Insert the disc (label side up), playback
starts.
Display window
USB terminal page 10
To connect to the USB device.
(eject) button
To eject the disc.
(front panel release) button page 5
(BACK) button page 8
To return to the previous display.
Receptor for the card remote
commander
ALBUM R E P S H U F DM PAUSE S C R L
2 3 4 5 6 DSPL
AUX
This section contains instructions on the location
of controls and basic operations. For details, see
the respective pages.
For USB device operation, see "USB devices" on
page 11.
The corresponding buttons on the card remote
commander control the same functions as those
on the unit.
OFF button
To power off; stop the source.
(BROWSE) button page 8
To enter the Quick-BrowZer mode.
Control dial/select button page 8, 12
To adjust volume/select search category
(rotate); select setup items (press and rotate).
SOURCE button
To power on; change the source (Radio/CD/
USB/AUX).
Disc slot
Insert the disc (label side up), playback
starts.
Display window
USB terminal page 11
To connect to the USB device.
(eject) button
To eject the disc.
(front panel release) button page 5
(BACK) button page 8
To return to the previous display.
Receptor for the card remote
commander

GENERAL

SEEK –/+ buttons
CD/USB
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
MODE button page 9
To select the radio band (FM/AM); select the
play mode of ATRAC Audio Device.
EQ3 (equalizer) button page 11
To select an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
BTM button page 9
To start the BTM function (press and hold).
RESET button (located behind the front
panel) page 4
Number buttons
CD/USB:
/ ALBUM –/+
To skip albums (press); skip albums
continuously (press and hold).
REP page 9
SHUF page 9
DM+ page 4
To activate the DM+ function, set
"DM+-ON." To cancel, set "DM+-
OFF."
PAUSE
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
DSPL (display)/SCRL (scroll) button
page 9
To change display items (press); scroll the
display item (press and hold).
AUX input jack page 12
To connect a portable audio device.
SEEK –/+ buttons
CD/USB:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
MODE button page 9
To select the radio band (FM/MW/LW);
select the play mode of ATRAC Audio
Device.
EQ3 (equalizer) button page 12
To select an equalizer type (XPLOD,
VOCAL, EDGE, CRUISE, SPACE,
GRAVITY, CUSTOM or OFF).
AF (Alternative Frequencies)/
TA (Traffic Announcement)/
PTY (Program Type) button page 10,
11
To set AF and TA (press); select PTY (press
and hold) in RDS.
RESET button (located behind the front
panel) page 4
Number buttons
CD/USB:
/ : ALBUM –/+
To skip albums (press); skip albums
continuously (press and hold).
: REP page 9
: SHUF page 9
: DM+ page 4
To activate the DM+ function, set
"DM+-ON." To cancel, set "DM+-
OFF."
: PAUSE
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
DSPL (display)/SCRL (scroll) button
page 9
To change display items (press); scroll the
display item (press and hold).
AUX input jack page 13
To connect a portable audio device.
This section is extracted
from instruction manual.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
( )/ ( ) buttons
To control CD/radio/USB, the same as
–/+ on the unit.
Setup, sound setting, etc., can be operated by
DSPL (display) button
To change display items.
VOL (volume) +/– button
To adjust volume.
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
SEL (select) button
The same as the select button on the unit.
During the Quick-BrowZer mode,
(select) is inactive.
(+)/ (–) buttons
To control CD/USB, the same as /
(ALBUM –/+) on the unit.
Setup, sound setting, etc., can be operated by
.
SCRL (scroll) button
To scroll the display item.
Number buttons
To receive stored stations (press); store
stations (press and hold).
Notes
• When ejecting/inserting a disc, keep any USB
devices disconnected to avoid damage to the disc.
• If the unit is turned off and the display disappears, it
cannot be operated with the card remote
commander unless on the unit is
pressed, or a disc is inserted to activate the unit first.
About USB cap
When not using the USB terminal ( ), use the
supplied USB cap to prevent dust or dirt entering.
Keep the USB cap out of the reach of children to
prevent accidental swallowing.
7
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
( )/ ) buttons
(
To control CD/radio/USB, the same as
–/+ on the unit.
Setup, sound setting, etc., can be operated by
.
DSPL (display) button
To change display items.
VOL (volume) +/– button
To adjust volume.
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
SEL (select) button
The same as the select button on the unit.
During the Quick-BrowZer mode,
(select) is inactive.
(+)/ (–) buttons
To control CD/USB, the same as /
(ALBUM –/+) on the unit.
Setup, sound setting, etc., can be operated by
.
SCRL (scroll) button
To scroll the display item.
Number buttons
To receive stored stations (press); store
stations (press and hold).
Notes
• When ejecting/inserting a disc, keep any USB
devices disconnected to avoid damage to the disc.
• If the unit is turned off and the display disappears, it
cannot be operated with the card remote
commander unless on the unit is
pressed, or a disc is inserted to activate the unit first.
About USB cap
When not using the USB terminal ( ), use the
supplied USB cap to prevent dust or dirt entering.
Keep the USB cap out of the reach of children to
prevent accidental swallowing.
7