Removing/Installing Armrests - Invacare TRACER EX2 User Manual

Invacare wheelchair user manual
Table of Contents

Advertisement

6 ARMS
6.2

Removing/Installing Armrests

WARNING
Make sure the height adjustment lever is in the locked position before using the wheelchair.
Removing Armrest
1.
Push down on armrest to ensure it is fully seated in front and rear sockets.
STEP 1 prevents the release buttons from hanging up on the sockets during removal.
2.
Press in the armrest release button at the front and rear of the armrest.
3.
While pressing in the armrest release buttons, remove the armrest from the arm sockets by pulling straight up.
Installing Armrest
1.
Position the armrest just above the front and rear arm sockets.
2.
Push arm down evenly at the front and rear until the front and rear armrest release buttons snap into the arm sockets.
3.
Ensure armrest is locked securely in the arm sockets by gently lifting up. If not locked, repeat STEPS 1-3.
Armrest Release Button
®
Invacare
Tracer™ EX2 Wheelchair
Rear Arm Socket
FIGURE 2 Removing/Installing Armrests
Armrest Release Button
Front Arm Socket
40
Armrest
Part No 1110546

Advertisement

Table of Contents
loading

Table of Contents