Download
Share
Print this page
Invacare WALKING TUTOR WT 200 Installation And Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Invacare Manuals
  4. Mobility Aid
  5. WALKING TUTOR WT 200
  6. Installation and operating instructions manual
Invacare WALKING TUTOR WT 200 Installation And Operating Instructions Manual

Invacare WALKING TUTOR WT 200 Installation And Operating Instructions Manual

Invacare mobility aid user manual
Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
Walking Tutor
Assembly, Installation and Operating Instructions
Model No. WT 200
SAVE THESE INSTRUCTIONS
NOTE: Check all parts for shipping damage. In case of damage, DO NOT use. Contact
Carrier/Invacare for further instructions.

Safety Summary

To ensure the safe and proper installation of the WT200 walking tutor, these instructions
MUST be followed:
WARNING
DO NOT use this equipment without first reading and understanding this
instruction sheet. If you are unable to understand the warnings, cautions and
instructions, contact a healthcare professional, dealer or technical personnel if
applicable, before attempting to install this equipment - otherwise, injury or
damage may occur.
Invacare products are specifically designed and manufactured for use in conjunction
with Invacare accessories. Accessories designed by other manufacturers have not
been tested by Invacare and are not recommended for use with Invacare products.
Assembling the Walking Tutor
Tools required:
• 9/16 Open End Wrench
• 16mm Box End Wrench
• 19mm Box End Wrench
• 13mm Socket Wrench
• 16mm Socket Wrench
• 18mm Socket Wrench
• 5mm Allen Key
• 6mm Allen Key
Attaching Strap Assemblies to the Boom
NOTE: For this procedure, refer to FIGURE 1 on page 2.
1. Remove the boom cover to expose the boom crossbar (Detail "C").
2. Secure the strap assembly on the crossbar by placing the strap around crossbar and
inserting the buckles through the loop (Detail "A").
For more information regarding Invacare products, parts, and services,
please visit www.invacare.com
1
Part No 1141439
Walking Tutor

Advertisement

loading

Related Manuals for Invacare WALKING TUTOR WT 200

Summary of Contents for Invacare WALKING TUTOR WT 200

  • Page 1: Safety Summary

    Invacare products are specifically designed and manufactured for use in conjunction with Invacare accessories. Accessories designed by other manufacturers have not been tested by Invacare and are not recommended for use with Invacare products. Assembling the Walking Tutor Tools required: •...
  • Page 2 3. Ensure that the strap is up against the boom arm and is pulled down tight (Detail “B”). 4. Repeat Steps 1-3 for the other strap assembly. 5. Replace the boom cover. DETAIL “A” Buckles Boom Crossbar Strap Assembly FIGURE 1 Attaching Strap Assemblies to the Boom Removing the Boom Bearing Retainer NOTE: For this procedure, refer to FIGURE 2 on page 3.
  • Page 3 Socket Head Screws DETAIL “A” Bearing Block Mast DETAIL “C” FIGURE 2 Removing the Boom Bearing Retainer Attaching the Walking Tutor to the Lift NOTE: For this procedure, refer to FIGURE 3 on page 4. 1. Install the pivot assembly to the mast. 2.
  • Page 4 Boom Bearing DETAIL “A” Retainer DETAIL “C” Socket Head Screws Walking Tutor Mast Bearing Block FIGURE 3 Attaching the Walking Tutor to the Lift Assembling the Armrest to Walking Tutor NOTE: For this procedure, refer to FIGURE 1 on page 2 and FIGURE 4 on page 5. 1.

  • Page 5: Adjusting The Armrest

    Hand Grip Lever Walking Tutor Arm FIGURE 4 Assembling the Armrest to Walking Tutor Adjusting the Armrest NOTE: For this procedure, refer to FIGURE 4. Height 1. Loosen and pull out the armrest adjustment knob. 2. Raise or lower armrest to one of the four height adjustment holes that best fits the patient.
  • Page 6 Using the Walking Tutor NOTE: Refer to the warnings and cautions in sling and lift manuals provided with the products before using the walking tutor. Removing the Footplate NOTE: For this procedure, refer to FIGURE 5. 1. Lift the footplate up to disengage the “C” brackets from the main frame. 2.

  • Page 7: Lifting The Patient

    Lifting the Patient 1. Instruct the patient to place arms outside the sling. 2. Ensure the following: A. The walking tutor is hanging down out of the way. B. The patientʹs knees are pressed against the kneepad. C. The bottom edge of the sling is positioned on the lower back. D.
  • Page 8 570 Matheson Blvd E Unit 8 Elyria, Ohio USA Mississauga Ontario 44036-2125 L4Z 4G4 Canada 800-333-6900 800-668-5324 PRODUCT MADE IN AUSTRALIA Invacare, Yes, you can. and The Medallion Design are registered trademarks of Invacare Corporation. ©2006 Invacare Corporation Part No 1141439 Rev A - 04/14/06...