Zanussi Electrolux ZDF 501 User Manual

Zanussi Electrolux ZDF 501 User Manual

Dishwasher
Hide thumbs Also See for ZDF 501:

Advertisement

User
manual
Dishwasher
ZDF 501

Advertisement

Table of Contents
loading

Summary of Contents for Zanussi Electrolux ZDF 501

  • Page 1 User manual Dishwasher ZDF 501...
  • Page 2: Table Of Contents

    Content Safety information - - - - - - - - - - - - - - - - - -3 Control panel and functions - - - - - - - - - - -4 Programme table - - - - - - - - - - - - - - - - - - -7 Before the first use - - - - - - - - - - - - - - - - -8 Setting the water softener - - - - - - - - - - - - -8 Filling with dishwasher salt - - - - - - - - - - -11...
  • Page 3: Safety Information

    Safety information In the interest of your safety and to ensure the correct use, before installing and first using the appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to ensure that all people using the appliance are thoroughly familiar with its operation and safety features.
  • Page 4: Control Panel And Functions

    Never use the dishwasher if the electrical WARNING! supply cable and water hoses are damaged; For electrical and water connection carefully or if the control panel, work top or plinth area follow the instructions given in specific are damaged such that the inside of the paragraphs.
  • Page 5 In addition to the dishwashing programme selection, the following functions can also be set with the help of these buttons. Function buttons - the setting of the water softener, - the cancelling of a programme in progress. Starting the washing programme: 1.
  • Page 6 This option allows the start of the programme to be delayed from 1 to 19 hours. Before selecting the washing programme, press the On/Off button and then press the delay start button until the flashing number of the hours for the delay start will appear in the digital display. Select a washing programme, in the digital display will appear for a moment, the running time of the programme and then again appears the selected delay start time.
  • Page 7: Programme Table

    Programme table Programme Cycle description Intensive Heavy soil. Prewash - Main wash 70° Crockery, cutlery, pots and pans 2 intermediate rinses - Final rinse Auto Normal / Light soil. Prewash - Main wash 65°50° Crockery and cutlery 1 or 2 intermediate rinses Final rinse - Dry 30 min.
  • Page 8: Before The First Use

    Before the first use When using separate special When using tablets that integrate (dishwasher) salt, rinse aid and rinse aid, detergent, salt function detergent: and other additives: - set the water softener there is no need to fill up with special salt or rinse aid.
  • Page 9 Water hardness Level indicated on Adjustment of the the digital display water hardness setting Clarke in °TH in mmol/l manually electronically 64 - 88 91 - 125 9,0 - 12,5 level 10 53 - 63 76 - 90 7,6 - 8,9 level 9 46 - 52 65 - 75...
  • Page 10: Level,

    Setting the water softener electronically (see table) The water softener is factory set at position 5. The dishwasher must Press and hold Release the buttons The digital display be switched off. simultaneously function and then press function indicates the current Switch on the buttons 2 and 3 until the button 1;...
  • Page 11: Filling With Dishwasher Salt

    Filling with dishwasher salt CAUTION! Use only special salt suitable for dishwashers Unscrew the cap. Only before filling with Using the funnel salt for the first time, provided, pour in the fill the salt container salt until the container is with water filled with salt.
  • Page 12: Filling With Rinse Aid

    Filling with rinse aid Open the lid. Fill up with rinse aid. Clean up any rinse aid The maximum level for which overflows. Close filling is indicated by the lid and press until it "max". locks. IMPORTANT! Top up the rinse aid when the light on the control panel illuminates.
  • Page 13: Loading Cutlery And Dishes

    Loading cutlery and dishes The following items are not suitable for use When loading the dishwasher, make sure in the dishwasher: that you: - Remove all left over food and debris. - Cutlery with wooden, horn, china or mother-of-pearl handles - Soften remnants of burnt food in pans - Plastic items that are not heat resistant - Load hollow items such as cups, glasses,...
  • Page 14 Load cutlery. Place knives and other For best results we items of cutlery with recommend you to use sharp points or edges the cutlery grid provided with their handles facing (if the size and upwards. dimensions of the Risk of injury! cutlery allow it.
  • Page 15: Adjusting The Height Of The Upper Basket

    Adjusting the height of the upper basket If washing very large plates you can load them in the lower basket after moving the upper basket to the higher position. Maximum height of the dishes in: upper basket lower basket With upper basket raised 20 cm 31 cm With upper basket lowered...
  • Page 16: Filling With Detergent

    Filling with detergent IMPORTANT! Only use detergents suitable for dishwashers. Observe the manufacturer’s dosing and storage recommendations. Open the lid. Observe the dosing Fill in the detergent in levels. compartment A. For programmes with When using detergent Close the lid. prewash add an tablets: additional detergent...
  • Page 17: Cleaning And Care

    Cleaning and care Cleaning the filters IMPORTANT! NEVER use the dishwasher without filters. Incorrect repositioning and fitting of the filters will produce poor washing results. The dishwasher must Clean filters A, B and C Turn the handle about Remove filter A from the be switched off thoroughly under turn anticlockwise...
  • Page 18: Environmental Concerns

    External cleaning Frost precautions Clean the external surfaces of the machine and Avoid placing the machine in a location where control panel with a damp soft cloth. If the temperature is below 0°C. If this is necessary use only neutral detergents. Never unavoidable, empty the machine, close the use abrasive products, scouring pads or appliance door, disconnect the water inlet pipe...
  • Page 19: Something Not Working

    Something not working IMPORTANT! The dishwasher will not start or stops during operation. Certain problems are due to the lack of simple maintenance or oversights, which can be solved with the help of the indications described in the chart, without calling out an engineer. Open the door and carry out the following suggested corrective actions.
  • Page 20 The wash results are not satisfactory The wrong washing programme has been selected. The dishes are not clean The dishes were arranged in such a way as to stop water reaching all parts of the surface. The baskets must not be overloaded. The spray arm do not rotate freely due to incorrect arrangement of the load.
  • Page 21: Technical Data

    Technical data Dimensions Width 60 cm Height 85 cm Depth. 61 cm Electrical connection Information on the electrical connection is given on the rating plate on Voltage - Overall power - Fuse the inner edge of the dishwasher’s door. Water supply pressure Minimum 0,05 MPa (0.5 bar) Maximum...
  • Page 22: Hints For Test Institutes

    Hints for test institutes Testing in accordance with EN 60704 must be Test in accordance with EN 50242 must be carried out with appliance fully loaded and carried out when the salt container and rinse using the test programme (see "Consumption aid dispenser have been filled with salt and values").
  • Page 23: Installation

    Installation WARNING! Any electrical and/or plumbing work required to install this appliance should be carried out by a qualified electrician and/or plumber or competent person. Water connection WARNING! WARNING! The dishwasher must not be connected to Only use, for connection to the water mains, open water appliances or instantaneous water new hose-set;...
  • Page 24: Electrical Connection

    CAUTION! Always be sure, that there is no water leakage from hoses and their connections after the installation. Ensure that the hoses are not kinked, crushed or entangled. Electrical connection WARNING! Safety standards require the appliance to be earthed. The manufacturer accepts no liability for failure to observe the above safety precautions.
  • Page 25: Fitting Under A Counter

    Fitting under a counter By removing the dishwasher’s worktop, you Be sure that once the appliance has been can install it under a close fitting sink unit or a installed, it is easily accessible for the service pre-existing top. engineer in the event that a repair is required. Unscrew the two screws Push the top backwards Lift top at the front and...
  • Page 26: Service And Spare Parts

    In the event of your appliance requiring Customer Care Department service, or if you wish to purchase spare parts please contact your local Service Force Centre For general enquiries concerning your Zanussi- by telephoning: Electrolux appliance or for further information on Zanussi-Electrolux products please contact...
  • Page 27: Guarantee Conditions

    Guarantee conditions Standard Guarantee Conditions Exclusions This guarantee does not cover: We, Zanussi-Electrolux, undertake that if within 12 months of the date of purchase this Damage or calls resulting from ZANUSSI-ELECTROLUX appliance or any part transportation, improper use or neglect, the...
  • Page 28: European Guarantee

    European guarantee This appliance is guaranteed by Electrolux, in each of the countries listed in the following page, for the period specified in the appliance guarantee or otherwise by law. If you move from one of these countries to another of these countries the appliance guarantee will move with you subject to the following qualifications: The appliance guarantee starts from the date...
  • Page 29 Ireland +353 1 40 90 753 Longmile Road Dublin 12 Italia +39 (0) 434 558500 C.so Lino Zanussi, 26 - 33080 Porcia (PN) Latvija +37 17 84 59 34 Kr. Barona iela 130/2, LV-1012, Riga Lituania +370 5 27 80 609...
  • Page 30 Notes ................
  • Page 31 Notes ................
  • Page 32 156999 58/0 Subject to change without notice...

Table of Contents