2
Select [Execute], and press the MENU
knob.
To delete shot marks
1
Select the frame where you want to
delete a shot mark, and then select
THUMBNAIL > Set Shot Mark >
Delete Shot Mark1 (or Delete Shot
Mark2).
The properties screen of the selected frame
appears, and a confirmation message appears
below the image.
2
Select [Execute], and press the MENU
knob.
Changing Clip Index Pictures
UDF / FAT-HD
In the essence mark thumbnail screen (see
page 94) or the expand thumbnail screen (see
page 93), you can set the selected frame of the
clip recorded in UDF/FAT-HD mode as the index
picture.
1
Select the thumbnail of the frame that
you want to use as the index picture,
and then select THUMBNAIL >Set
Index Picture.
The properties screen of the selected frame
appears, and a confirmation message appears
below the image.
2
Select [Execute], and press the MENU
knob.
Note
Even if you set the index picture to a frame that is not the
first frame of a clip, playback of that clip from a
thumbnail screen always begins at the first frame.
Dividing Clips
FAT-HD
In the expand thumbnail screen (see page 93) and
the essence mark thumbnail screen (see page 94),
clips recorded in FAT-HD mode can be divided
into two clips at the selected frame.