Displaying The Essence Mark Thumbnail Screen; Adding And Deleting Shot Marks - Sony PMW-500 Operation Manual

a Timecode
This is the timecode of the selected partial file.
b Duration
This is the duration of the selected partial file.
To increase the number of divisions
When you press the DISP SEL/EXPAND button,
or select THUMBNAIL >Thumbnail View
>Forward Expansion, the divided clip or file is
further divided into 12 equally-sized blocks (a
clip or file that has been divided into 12 is further
divided into 12, for 12 × 12 = 144 divisions). You
can repeat the same operation to increase the
number of division.
To return to the previous division level
Press the DISP SEL/EXPAND button with the
SHIFT button held down, or select
THUMBNAIL >Thumbnail View >Back
Expansion. The expand thumbnail screen returns
to the previous division level.
Displaying the Essence Mark
Thumbnail Screen
HD
In the essence mark thumbnail screen (shown
only in HD mode), you can search for shot marks
in clips (see page 84), change index pictures (see
page 95), and add and delete shot marks (see
page 94).
1
In the thumbnail screen, select the
thumbnail of a clip, and press the
ESSENCE MARK button (see page 21)
or select THUMBNAIL >Thumbnail
View >Essence Mark Thumbnail.
2
The essence mark thumbnail screen
appears, and a selection list is displayed.
3
Select the type of the essence mark
thumbnail screen
Shot Mark1: Display only frames marked
with Shot Mark1 marks.
Shot Mark2: Display only frames marked
with Shot Mark2 marks.
Shot Mark: Display frames marked with
either Shot Mark1 or Shot Mark2 marks.
94 Thumbnail Operations
Rec Start: Display frames marked with Rec
Start marks and of the first frames of
clips when the first frames are not
marked with Rec Start marks.
All: Display all frames marked with essence
marks.
Example shot mark thumbnail screen
(with Shot Mark selected)
S1 S2
S1 S1
The properties of the clip appear at the bottom of
the screen.
Except for the following item, the information
displayed here is the same as the information
displayed in the expand thumbnail screen.
a Timecode
This is the timecode of the selected frame in the
shot mark thumbnail screen.

Adding and Deleting Shot Marks

UDF / FAT-HD
In the essence mark thumbnail screen (see
page 94) or the expand thumbnail screen (see
page 93), you can add thumbnails to any frame of
clips recorded in HD mode, and delete recorded
shot marks.
To add shot marks
1
Select the frame where you want to add
a shot mark, and then select
THUMBNAIL > Set Shot Mark > Add
Shot Mark1 (or Add Shot Mark2).
The properties screen of the selected frame
appears, and a confirmation message appears
below the image.
S2 S1