Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Viglen Manuals
  4. Motherboard
  5. Motherboard Vig390s
  6. Manual

Viglen Motherboard Vig390s Manual

Viglen motherboard manual
Hide thumbs

Advertisement

Quick Links

Download this manual
Vig390s
Motherboard
Manual
.
C O M P U T E R S
.
N E T W O R K S
S O L U T I O N S
G r e a t
M i n d s
T h i n k
0
®

Advertisement

loading

Related Manuals for Viglen Motherboard Vig390s

Summary of Contents for Viglen Motherboard Vig390s

  • Page 1 Vig390s Motherboard Manual C O M P U T E R S N E T W O R K S S O L U T I O N S G r e a t M i n d s T h i n k ®...
  • Page 2 Viglen, EMC and the ‘CE’ mark CE Marking European standards are being harmonised across borders. If products comply with the same standards in all European countries, product exporting and importing is made simple - paving our way to a common market. If you buy a product with a 'CE' mark on it (shown below), on the box, in the manual, or on the guarantee - it complies with the currently enforced directive(s).
  • Page 3 Microsoft Corporation. IBM PC, XT, AT and PS/2 are trademarks of International Business Machines Corporation. Pentium and Pentium Pro are registered trademarks of Intel Corporation. AMI BIOS is a registered trademark of American Megatrends. All other trademarks are acknowledged. JAC-UP, Genie, Contender, Dossier, Vig, Viglen, and Envy are trademarks of Viglen Limited.

  • Page 4: Table Of Contents

    Back Panel Connectors Feature Summary System Processor System Memory Memory Configurations Intel® E7525 chipset (Northbridge) Intel® 6300ESB I/O Controller (Southbridge) Vig390s motherboard block diagram USB Support IDE Support Parallel ATA IDE Interfaces Serial ATA Support Real-Time Clock, CMOS SRAM and Battery...
  • Page 5 Chapter 4 System BIOS What is the BIOS? The Power-on Sequence AMI BIOS Plug and Play: PCI Auto-configuration PCI IDE Support Desktop Management Interface (DMI) Advanced Power Management (APM) Advanced Configuration and Power Interface (ACPI) Configuring the Motherboard using BIOS Setup Setting the Processor Speed Clearing the Passwords BIOS Setup Program...

  • Page 6: Chapter 1 Overview

    It contains all of the CPU, memory and graphics circuitry that make the computer work. The motherboard contains the very latest CPU design, the Intel Xeon™ processor, which includes Intel NetBurst® Microarchitecture with 800 MHz system bus, Internet Streaming SIMD Extensions 3, Intel Hyper-Threading Technology hardware support for multi-threaded applications and Intel’s Extended Memory 64-bit technology...

  • Page 7: System Board Components

    Memory DIMM slots B1 A1 Vig390s Motherboard Manual V1.0 Front Chassis Fan 2 Secondary IDE connector Primary IDE connector Southbridge Intel® 6300ESB Serial ATA (S-ATA) connectors Floppy drive connector Front panel audio connector Front panel USB connectors 5/6 USB controller (VIA VT6212L)

  • Page 8: Back Panel Connectors

    CPU1 FAN connector Northbridge Intel © E7525 ATX 12V1 connector 6 way CPU 1 socket (mPGA604 pin socket for Intel ® Xeon ™) CPU 2 socket (mPGA604 pin socket for Intel ® Xeon ™) CPU 2 FAN connector Front Chassis Fan 1 Note: 1.
  • Page 9 Table 2: Back Panel Connectors. Item Description PS/2* mouse port (Green) Parallel port (Burgundy) IEE1394a LAN RJ45 Audio line In (Blue) Line Out (Lime green) L and R audio Note: The back panel audio out connectors are designed to power headphones or amplified speakers only.

  • Page 10: Feature Summary

    Feature Summary The VIG390S motherboard supports Intel Pentium Xeon™ processors with 1MB of third-level cache integrated in a micro PGA 604 Socket package operating at speeds up to 3.6GHz. Single or dual processors are supported but should be identical in speed and CPU stepping revision.

  • Page 11: System Processor

    RAM (BSRAM) and tag RAM. All supported onboard memory can be cached. Processor Upgrades The motherboard can be upgraded with an Intel Xeon™ processor that runs at higher speeds with a maximum of 3.6GHz. Vig390s Motherboard Manual V1.0...

  • Page 12: System Memory

    System Memory Main Memory The motherboard has four DDR2 SDRAM Dual Inline Memory Module (DIMM) sockets. Support for up to a maximum memory size of 8GB. The BIOS automatically detects memory type, size, and speed. The motherboard supports the following memory features: •...

  • Page 13: Memory Configurations

    Memory Configurations The Vig390s with Intel E7525 MCH supports Dual channel (Interleaved) mode memory organisation: Dual channel (Interleaved) mode: This mode offers the highest throughput for real world applications. Dual channel mode is enabled when the installed memory capacities of both DIMM channels are equal. Technology and device width can vary from one channel to the other but the installed memory capacity for each channel must be equal.
  • Page 14 Dual Channel (Interleaved) Mode Configurations Figure 5 shows a dual channel configuration using two DIMMs. In this example, the DIMM A1, B1 (black) sockets of both channels are populated with identical DIMMs. Figure 5: Dual Channel (Interleaved) Mode Configuration with Two DIMMs Figure 6 shows a dual channel configuration using four DIMMs.
  • Page 15 Single Channel (Asymmetric) Mode Configurations (Illustration only) Note: Dual channel (Interleaved) mode configurations provide the highest memory throughput. Figure 7 shows a single channel configuration using one DIMM. In this example, only the DIMM1 (black) socket of Channel A is populated. Channel B is not populated.

  • Page 16: Intel® E7525 Chipset (Northbridge)

    The Intel® E7525 Chipset MCH is the central hub for all data passing between the core system elements: processors, memory, PCI Express x16 graphics, PCI Express I/O and legacy I/O subsystems. It supports dual Intel Xeon processors with 1MB L2 cache over the 800 MHz system bus interface, delivering bandwidth up to 6.4...

  • Page 17: Intel® 6300Esb I/O Controller (Southbridge)

    RAID 0, 1 technology. Four Hi-Speed USB 2.0 ports allow easy I/O connection, while offering improved bandwidth compared to USB 1.1 devices. The Intel 6300ESB I/O Controller Hub also includes one PCI-X 64/66 bus supporting up to 4 PCI-X 64/66 MHz interfaces.

  • Page 18: Vig390S Motherboard Block Diagram

    Vig390s motherboard block diagram The Vig390s motherboard integrates both the Intel E7525 MHC and Intel 6300ESB I/O controller with the following additional components: Gigabit LAN BCM5751 IEEE1394a controller TBS43AB22A USB 2.0 controller VT6202 H/W monitor W83792B Supper I/O controller W83627THF-A...

  • Page 19: Usb Support

    USB Support The motherboard has four rear USB 2.0 ports; note optional front panel USB adaptor connector is required to use the internal USB headers to provide up to 4 more additional ports. One USB peripheral can be connected to each port. For more than four USB devices, an external hub can be connected to either port.

  • Page 20: Parallel Ata Ide Interfaces

    Parallel ATA IDE Interfaces The ICH5’s Parallel ATA IDE controller has two independent bus-mastering Parallel ATA IDE interfaces that can be independently enabled. The Parallel ATA IDE interfaces support the following modes: • Programmed I/O (PIO): processor controls data transfer. •...

  • Page 21: Real-Time Clock, Cmos Sram And Battery

    • Interface for one 1.44 MB diskette drive • PCI-X 64/66 ports • PCI 32/33 ports • Two P-ATA ports • Two S-ATA ports with configurable Intel RAID 0 and 1 support • Intelligent power management, including a programmable wake-up event interface • SMBus hardware management support •...
  • Page 22 Parallel Port The connector for the multimode bi-directional parallel port is a 25-pin D-Sub connector located on the back panel. In the Setup program, the parallel port can be configured for the following: • Compatible (standard mode). • Bi-directional (PS/2 compatible). •...

  • Page 23: Audio Subsystem

    • Split digital/analog architecture for improved S/N (signal-to-noise) ratio: > 94 dB The Flex 6 audio subsystem includes the following features: • Intel 82801EB I/O Controller Hub (ICH5) • Analog Devices AD1980 audio codec • Microphone input that supports a single dynamic, condenser, or electrets...

  • Page 24: Audio Connectors

    Figure 11: Back Panel Audio Connector Options Note: To access the S/PDIF signal with the 5.1 Digital Shared Jack option, connect a 1/8-inch stereo phone plug to RCA jack adapter/splitter as shown in Figure 12. Figure 12: Adapter for S/PDIF Back Panel Connector Audio Connectors Front Panel Audio connector A 2 x 5-pin connector provides mic in and line out signals for front panel audio...

  • Page 25: Lan Subsystem

    LAN Subsystem The Network Interface Controller subsystem consists of the Broadcom NetXtreme™ BMC5751 PCI Express Gigabit LAN controller Supporting PCI Express 1.0a interface. Features • 10/100/100BASE-T Gigabit Ethernet • PCI-Express bus interface • IEEE802.3 compliant media access controller (MAC) • TCP,IP, and UDP checksum •...

  • Page 26: Hardware Management Subsystem

    Hardware Management Subsystem The hardware management features enable the Desktop Boards to be compatible with the Wired for Management (WfM) specification. The Desktop Board has several hardware management features, including the following: • Fan monitoring and control (through the hardware monitoring and fan control ASIC) •...

  • Page 27: Power Management

    Power Management Power management is implemented at several levels, including: • Software support through Advanced Configuration and Power Interface (ACPI) • Hardware support: o Power connector o Fan connectors o LAN wake capabilities o Instantly Available PC technology o Resume on Ring o Wake from USB o Wake from PS/2 devices o Power Management Event signal (PME#) wake-up support...
  • Page 28 System States and Power States Under ACPI, the operating system directs all system and device power state transitions. The operating system puts devices in and out of low-power states based on user preferences and knowledge of how devices are being used by applications. Devices that are not being used can be turned off.

  • Page 29: Hardware Support

    Hardware Support CAUTION! Ensure that the power supply provides adequate +5 V standby current if LAN wake capabilities and Instantly Available PC technology features are used. Failure to do so can damage the power supply. The total amount of standby current required depends on the wake devices supported and manufacturing options.
  • Page 30 LAN wake Capabilities CAUTION! For LAN wake capabilities, the +5 V standby line for the power supply must be capable of providing adequate +5 V standby current. Failure to provide adequate standby current when implementing LAN wake capabilities can damage the power supply.
  • Page 31 Wake from USB USB bus activity wakes the computer from ACPI S1 or S3 states. Note: Wake from USB requires the use of a USB peripheral that supports Wake from USB. Wake from PS/2 Devices PS/2 device activity wakes the computer from an ACPI S1 or S3 state. PME# Signal Wake-up Support When the PME# signal on the PCI bus is asserted, the computer wakes from an ACPI S1, S3, S4, or S5 state (with Wake on PME enabled in BIOS).

  • Page 32: Chapter 2 System Board Options

    Chapter 2: System Board Options The VIG390S motherboard is capable of accepting up to two Xeon™ CPU’s. RAM can be upgraded to a maximum of 8GB using DDR2 400 SDRAM DIMMs ECC Unbuffered memory. WARNING! Unplug the system before carrying out the procedures described in this chapter.
  • Page 33 Make sure you are earthed and free of static charge before you open the computer case. If you are unsure about upgrading your computer, return it to Viglen so a qualified engineer can perform the upgrade. STEPS TO TAKE TO PREVENT STATIC DISCHARGE: 1.

  • Page 34: Overview Of Jumper Settings

    Overview of Jumper Settings The VIG390S motherboard contains the latest technology to offer an almost jumperless configuration. All Xeon™ CPUs are automatically detected and the Speed is automatically set from the information provided by the CPU. CAUTION! Never remove jumpers using large pliers as this can damage the pins. The best way to remove a jumper is to use a small pair of tweezers or fine needle-nosed pliers.

  • Page 35: System Board Jumper Settings

    1 2 3 DEFAULT DISABLE ENABLE USB_EN1 1 2 3 1 2 3 DEFAULT DISABLE ENABLE CLRTC1 INTEL 1 2 3 1 2 3 6300ESB DEFAULT CLEAR NORMAL CMOS Vig390s Motherboard Manual V1.0 1 2 3 DEFAULT 1 2 3...
  • Page 36 CLEAR CMOS Jumper Settings (CLRTC1) The table below describes the jumper settings; if the jumper removed and the computer is powered-up then a system boot failure will occur. Table 12: CLEAR CMOS Jumper Settings (CLRTC1) Function/Mode Jumper Setting (Default) Normal CLEAR CMOS USB Jumper (USB_EN1) The table below describes the jumper settings;...
  • Page 37 Disable Front Panel audio Jumpers (Front panel audio) The table below describes the jumper settings; if the jumper removed and the computer is powered-up then a system boot failure will occur. Table 16: Front Panel audio Jumpers (Front panel audio) Function/Mode Jumper Setting (Default) 9-10...
  • Page 38 Table 19: USB power Jumper (USBPW12) Function/Mode Jumper Setting (Default) +5VSB Keyboard Power Jumper (KBPWR1) The table below describes the jumper settings; if the jumper removed and the computer is powered-up then a system boot failure will occur. Table 20: Keyboard Power Jumper (KBPWR1) Function/Mode Jumper Setting (Default) +5VSB...

  • Page 39: Motherboard Connectors

    Floppy Drive Connector connectors PCI IDE Connector Vig390s Motherboard Manual V1.0 COM2 Header Front Panel Audio Rear Chassis Audio Audio INTEL E7525 INTEL 6300ESB SATA FRONT Chassis FRONT Chassis SATA SATA SECONDARY PCI IDE Connector PRIMARY Figure 15: Motherboard Connectors Rear Chassis ATX 2.2...

  • Page 40: Front Panel Connectors

    Front panel connections The following are all connectors situated along the front edge of the motherboard. They are often connected to buttons and LED’s situated on the front panel. A - Hard Disk L.E.D. Connector This goes to the Hard Disk L.E.D. on the front panel, which lights up when the IDE Hard Disk is in use.

  • Page 41: Upgrading The Cpu

    CAUTION! Allow time for the processor and heatsink to cool before touching either of them. The Intel Xeon™ processor together with Level 2 cache chips are housed in a protective package. The design of the VIG390S computer makes it a simple job to replace or upgrade the processor.
  • Page 42 Note: in the figure above the circled holes are not motherboard mounting holes these hold the Heatsink clips fitted to the motherboard as shown below in figures 18 and 19. Figure 18: CPU sockets showing Heatsink clips Figure 19: Back of MB showing Heatsink clips Vig390s Motherboard Manual V1.0...
  • Page 43 Figure 20: CPU sockets If one CPU is to be installed it should be installed in socket for CPU1 as shown above. Lift the socket arm up as shown for both sockets in figure 21 install CPU noting correct orientation. Figure 21: CPU fitted in ZIF socket Now repeat for second CPU if required;...
  • Page 44 Figure 22: Xeon CPU heatsink Fitting the heatsinks the figure above shows a typical Heatsink from top and bottom; note the circled pillars that must locate through the motherboard. Note also that if Heatsink thermal paste is not already applied to heatsinks this must now be done. Figure 23: Mounting Heatsink to MB Carefully locate each Heatsink over each CPU and allow the pillars to align with mounting plates and fixing points through motherboard.
  • Page 45 Figure 24: Securing Heatsink through MB Now tighten all four screws diagonally to secure Heatsink in place and repeat for second Heatsink if necessary. Figure 25: Heatsink fan cable points Vig390s Motherboard Manual V1.0...
  • Page 46 Once both heatsinks are secured locate and connect the fna cables of each Heatsink to the appropriate CPU fan header, for CPU 1 “CPU FAN” and for CPU2 “CPU FAN 2”. Figure 26: Two Heatsinks fitted through MB You should now have two CPU’s and Heatsink/s secured with fan cable/s connected correctly.

  • Page 47: Installing & Removing Dual In-Line Memory Modules

    Installing & Removing DDR SDRAM In-line Memory Modules Installing Memory You can install from 256MB to 8GB of memory in the motherboard DIMM sockets. The board has four 240-pin DDR2 72bit registered ECC SDRAM DIMM sockets. The motherboard supports the following memory features: •...

  • Page 48: Removing Memory

    Removing Memory To remove a DIMM, follow these steps: 1. Observe the precautions in “Upgrading and ESD precautions”. 2. Turn off all peripheral devices connected to the computer. Turn off the computer. 3. Remove the computer cover. 4. Gently spread the retaining clips at each end of the socket. The DIMM pops out of the socket.

  • Page 49: Replacing The Clock/Cmos Ram Battery

    Replacing the Clock/CMOS RAM Battery A lithium battery is installed in a socket on the system board. The battery has an estimated life expectancy of seven years. When the battery starts to weaken, it loses voltage; when the voltage drops below a certain level, the system settings stored in CMOS RAM (for example, the date and time) may be wrong.

  • Page 50: Chapter 3 Solving Problems

    Chapter 3: Solving Problems The first part of this chapter helps you identify and solve problems that might occur when the system is in use. The second part lists error code messages that might be displayed. Please remember that if you cannot solve the problem by yourself then you should contact your suppliers Technical Support for further assistance.

  • Page 51: Troubleshooting Procedures

    Troubleshooting Procedure This section provides a step-by-step troubleshooting procedure to identify a problem and locate its source. CAUTION! 1. Turn off the system and any peripheral devices before you disconnect any peripheral cables from the system. Otherwise, you can permanently damage the system or the peripheral devices.

  • Page 52: Problems Operating Add-In Boards

    Problems Operating Add-in Boards Problems related to add-in boards are usually related to improper board installation or interrupt and address conflicts. Go through the checklist below to see if you can correct the problem. If the problem persists after you have checked and corrected all of these items, contact the board vendor's customer service representative.

  • Page 53: Problems And Suggestions

    Problems and Suggestions Table 24: Problems and Suggestions What happens What to do Try resetting the system. Application software problems Make sure all cables are installed correctly. Verify that the system board jumpers are set properly. Verify that your system hardware configuration is set correctly. In Setup, check the values against the system settings you recorded previously.
  • Page 54 Table 24: Problems and Suggestions (Continued) What happens What to do Hard drive light does Make sure the power and signal cables for the drive are properly not go on when drive installed. is in use or is tested Make sure the front panel connector is securely attached to the by POST system board headers.

  • Page 55: Error And Information Messages

    Error and Information Messages The rest of this chapter describes beep codes, and error messages that you might see or hear when you start up the system: BIOS Error Messages Table 25: BIOS Error Messages Error Message Explanation GA20 Error An error occurred with Gate A20 when switching to protected mode during the memory test.

  • Page 56: Bios Beep Codes

    Table 25: BIOS Error Messages (Continued) Error Message Explanation Memory Size Changed Memory size has changed since the last boot. If no memory was added or removed then memory may be bad. No Boot Device Available System did not find a device to boot. Off Board Parity Error A parity error occurred on an off-board card.

  • Page 57: Chapter 4 System Bios

    Chapter 4: System BIOS What is the BIOS? The BIOS (Basic Input Output System) is an important piece of software which is stored in a ROM (Read Only Memory) chip inside the computer. It consists of the basic instructions for controlling the disk drives, hard disk, keyboard and serial/parallel ports.

  • Page 58: Ami Bios

    BIOS Upgrades A new version of the BIOS can be upgraded from a diskette using the iFLASH.EXE utility that is available from Intel. This utility does BIOS upgrades as follows: • Updates the flash BIOS from a file on a disk.

  • Page 59: Plug And Play: Pci Auto-Configuration

    BIOS Flash Memory Organisation The Intel Firmware Hub (FWH) includes a 8 Mbit flash memory device. Internally, the device is grouped into eight 64-KB blocks that are individually erasable, lockable, and unlockable. The 8-Mbit flash component is organised as 256 KB x 8 bits and is divided into areas as described in Table 27.

  • Page 60: Desktop Management Interface (Dmi)

    The MIF database defines the data and provides the method for accessing this information. The BIOS enables applications such as Intel LANDesk® Client Manager to use DMI. information: • BIOS data, such as the BIOS revision level.
  • Page 61 • Suspend/resume switch connected to the front panel sleep connector. • From the operating system, such as the Suspend menu item in Windows 95. In standby mode, the motherboard reduces power consumption by using SMM capabilities, spinning down hard drives, and reducing power to or turning off VESA DPMS-compliant monitors.

  • Page 62: Advanced Configuration And Power Interface (Acpi)

    Advanced Configuration and Power Interface (ACPI) ACPI gives the operating system direct control over the power management and Plug and Play functions of a computer. ACPI requires an ACPI-aware operating system. ACPI features include: • Plug and Play (including bus and device enumeration) and APM functionality normally contained in the BIOS.
  • Page 63 The network can be selected as a boot device. This selection allows booting from a network add-in card with a remote boot ROM installed OEM Logo or Scan Area A 4 KB flash-memory user area at memory is for displaying a custom OEM logo during POST.

  • Page 64: Configuring The Motherboard Using Bios Setup

    Configuring the Motherboard using BIOS Setup Before You Begin CAUTION! • Always follow the steps in each procedure in the correct order. • Set up a log to record information about your computer, such as model, serial numbers, installed options, and configuration information. •...

  • Page 65: Bios Setup Program

    BIOS Setup Program The Setup program is for viewing and changing the BIOS settings for a computer. Setup is accessed by pressing the <Delete> key after the Power-On Self Test (POST) memory test begins and before the operating system boot begins. Table 30 shows the menus available from the menu bar at the top of the Setup screen.

  • Page 66: Menu Bar

    BIOS Screen layout Menu Items Menu BAR Main Advanced Power System Time System date Legacy Diskette A Primary P-ATA IDE Master Primary P-ATA IDE Slave Secondary P-ATA IDE Master: Secondary P-ATA IDE Slave : S-ATA 1 S-ATA 2 8IDE Configuration 8System Information v02.53 (C) Copyright 1985-2002, American Magatrends, Inc.

  • Page 67: Navigation Keys

    not be changed or an item that may be configured and permanently changed. To change each field follow the navigation key guide either Press <ENTER> key or <-> or <+> keys to change selected filed. To save the desired change/s the “Save and Exit”...

  • Page 68: Main Menu

    Main Menu This menu is for configuring the system date, system time, hard drives, optical drives, IDE configuration and system configuration. Main Advanced Power System Time System date Legacy Diskette A Primary P-ATA IDE Master Primary P-ATA IDE Slave Secondary P-ATA IDE Master: Secondary P-ATA IDE Slave : S-ATA 1 S-ATA 2...
  • Page 69 None Primary P-ATA IDE Slave None Secondary P-ATA IDE Master None Secondary P-ATA IDE Slave None S-ATA 1 None S-ATA 2 None IDE Configuration None System Information Vig390s Motherboard Manual V1.0 Displays a detected P-ATA drive. Press <Enter> to view this Sub menu A P-ATA IDE device is listed to the right otherwise not detected will be displayed.
  • Page 70 Main / Primary P-ATA IDE Master or Slave Sub-menu This menu shows a detected hard drive or CD-ROM features and allows configuration settings to be made. The example is of a hard drive. Main Primary P-ATA IDE Master Device : Hard Drive Vendor : HDS722512VLAT20 Size...
  • Page 71 LBA/ Large Mode • Disabled • Auto [Default] Block [Multi-sector • Disabled Transfer] • Auto [Default] PIO Mode • Auto [Default] • • • • • DMA Mode • Auto [Default] • SWDMA0 • SWDMA1 • SWDMA2 • MWDMA0 • MWDMA0 •...
  • Page 72 Main / Secondary P-ATA IDE Master or Slave Sub-menu This menu shows a detected hard drive or CD-ROM drive features and allows configuration settings to be made. The example is of a CD-ROM drive. Main Secondary P-ATA IDE Master Device : ATAPI CD-ROM Vendor : SONY...
  • Page 73 PIO Mode • Auto [Default] • • • • • DMA Mode • Auto [Default] • SWDMA0 • SWDMA1 • SWDMA2 • MWDMA0 • MWDMA0 • MWDMA1 • MWDMA2 • UDMA 0 • UDMA 1 • UDMA 2 Vig390s Motherboard Manual V1.0 Sets the PIO mode (This item is read-only unless Type is set to User) Specifies the DMA mode for the drive...
  • Page 74 Main menu / IDE Configuration Sub-menu This menu shows the IDE controller configuration. Main IDE Configuration Onboard IDE Operate Mode Enhanced Mode Support On Configure S-ATA as RAID IDE Detect Time Out (Sec) v02.53 (C) Copyright 1985-2002, American Magatrends, Inc. Figure 34: IDE Configuration Sub-menu A detailed description of each of the features is given in the following table.
  • Page 75 Main AMIBIOS Version : 08.00.10 Build Date : 02/16/05 Processor Type : Intel (R) Xeon (TM) CPU 3.6 Speed : 3600 MHz Count System Memory Size : 1024MB v02.53 (C) Copyright 1985-2002, American Magatrends, Inc. Figure 35: Main / System Information Sub-menu A detailed description of each of the features is given in the following table.

  • Page 76: Advanced Menu

    Advanced menu This menu is for access to configure advanced features. Main Advanced Power 8Instant Music Configuration 8Speech Configuration 8PCI Express Configuration 8USB Configuration 8MPS Configuration 8CPU Configuration 8Chipset 8Onboard Device Configuration 8PCI PnP v02.53 (C) Copyright 1985-2002, American Magatrends, Inc. A detailed description of each of the features is given in the following table.
  • Page 77 Advanced / Speech Configuration Sub-menu This menu allows configuration of speech options. Main Advanced Power Speech Option Speech POST Reporter Report IDE Error Report System Booting v02.53 (C) Copyright 1985-2002, American Magatrends, Inc. Figure 37: Advanced / Speech Configuration Sub-menu A detailed description of each of the features is given in the following table.
  • Page 78 Advanced / PCI Express Configuration Sub-menu The menu below allows the configuration of the PCI-Express LAN Main Advanced Power PCI Express Onboard LAN v02.53 (C) Copyright 1985-2002, American Magatrends, Inc. Figure 38: Advanced / PCI Express Configuration sub menu A detailed description of each of the features is given in the following table. Table 39: Advanced / PCI Express Configuration sub menu Feature Options...
  • Page 79 Advanced / USB Configuration Sub-menu This menu allows USB controller configuration Main Advanced Power USB Configuration Module Version – 2.23.2-7.4 USB Devices Enabled; None USB Function Legacy USB Support USB 2.0 controller USB Controller Mode v02.53 (C) Copyright 1985-2002, American Magatrends, Inc. Figure 39: Advanced / USB Configuration sub menu A detailed description of each of the features is given in the following table.
  • Page 80 Advanced / MPS Configuration Sub-menu This menu allows the Multi-Processor Table to be configured. Main Advanced Power MPS Configuration [1.4] MPS Revision v02.53 (C) Copyright 1985-2002, American Magatrends, Inc. Figure 40: Advanced / MPS Configuration sub menu A detailed description of each of the features is given in the following table. Table 41: Advanced / MPS Configuration sub menu Feature Options...
  • Page 81 Advanced / CPU Configuration Sub-menu This manus configures the CPU settings Main Advanced Power Configure Advance CPU settings Manufacturer: Intel Brand String: Intel(R )Xeon (TM) CPU 3.6GHz Frequency : 3600 MHZ FSB Speed : 800 MHz Ratio Status: Locked Ratio Actual Value : 18...
  • Page 82 • Disable Onboard LAN Boot • Enable [Default] • Disabled Vig390s Motherboard Manual V1.0 CPU Intel (R) SpeedStep (tm) tech Control. It is not recommended to disable this feature. BIOS SETUP UTILITY Boot Exit [Enabled] [Enabled] Description Press <Enter> to view this Sub menu Press <Enter>...
  • Page 83 Advanced / Northbridge Configuration Sub-menu This menu configures Northbridge options Main Advanced Power Northbridge Chipset Configuration DIMM SPEED:DDR2 400 Memory Remap Feature Memory Mirror/Sparing v02.53 (C) Copyright 1985-2002, American Magatrends, Inc. Figure 43: Advanced / Northbridge Configuration Sub-menu A detailed description of each of the features is given in the following table. Table 44: Advanced / Northbridge Configuration Sub-menu Feature Options...
  • Page 84 Advanced / Southbridge configuration Sub-menu This menu allows the configuration of Southbridge options South Bridge Chipset Configuration Main Advanced Power Onboard AC’97 Audio v02.53 (C) Copyright 1985-2002, American Magatrends, Inc. Figure 44: Advanced / Southbridge configuration Sub-menu A detailed description of each of the features is given in the following table. Table 45: Advanced / Southbridge configuration Sub-menu Feature Options...
  • Page 85 Advanced / Onboard Device Configuration Sub-menu This menu configures the serial, parallel and game port. Main Advanced Power Configuration Win627EHF Super IO Chipset Serial Port1 Address Serial Port2 Address Parallel port Address Parallel Port Mode Parallel Port IRQ Onboard Game/Midi Port v02.53 (C) Copyright 1985-2002, American Magatrends, Inc.
  • Page 86 Parallel Port Mode • Normal [Default] • Bi-Directional • • Parallel Port IRQ • IRQ5 • IRQ7 [Default] Onboard • Disabled Game/Midi Port [Default] • 200/300 • 200/330 • 208/300 • 208/330 Vig390s Motherboard Manual V1.0 Additional Parallel port system resource setting IF Parallel Port Address is set to “Disabled”...
  • Page 87 Advanced / PCI PnP Sub-menu This menu allows advanced configuration of PCI BUS Main Advanced Power Advanced PCI/PnP Settings Warning: Setting wrong values in bellow sections May cause system to malfunction. Plug And Play O/S PCI Latency Timer Allocate IRQ To PCI VGA Pallet Snooping PCI IDE BusMaster Offboard PCI/ISA IDE Card...
  • Page 88 A detailed description of each of the features is given in the following table. Table 47: Advanced / PCI PnP Sub-menu Feature Options • Plug And Play O/S NO [Default] • • PCI Latency Timer • 64 [Default] • • •...

  • Page 89: Power Menu

    Power Menu This menu configures power management Main Advanced Power System Mode Repost Video on S3 Resume ACPI 2.0 Support ACPI APIC Support APM Configuration Hardware Monitor v02.53 (C) Copyright 1985-2002, American Magatrends, Inc. A detailed description of each of the features is given in the following table. Table 48: Power Menu Feature Options...
  • Page 90 Power / APM Configuration Sub-menu This menu allows the configuration of APM features Main Advanced Power APM Configuration Power Management/APM Video Power Down Mode Hard Drive Power Down Mode Suspend Time Out Throttle Slow Clock Ratio Power Button Mode Restore on AC Power Loss Power On By PS/2 Keyboard Power On By PS/2 Mouse Power On Ring...
  • Page 91 Suspend Time • Disabled [Default] • 1 min • 2 min • 4 min • 8 min • 10 min • 20 min • 30 min • 40 min • 50 min • 60 min Throttle Slow • 87.5% Clock Ratio •...
  • Page 92 RTC Alarm Hour 00 to 23 RTC Alarm Minute 00 to 59 RTC Alarm 00 to 60 Second Vig390s Motherboard Manual V1.0 Set on hour option Note this will only be displayed if “Power On By RTC Alarm” is set to “Enabled” Set on minute option Note this will only be displayed if “Power On By RTC Alarm”...
  • Page 93 Power / Hardware Monitor Sub-menu This menu configures and shows hardware monitor features Main Advanced Power Hardware Monitor CPU1 Temperature CPU2 Temperature MB Temperature CPU1 Fan Speed CPU1 Fan Speed Front1 Fan Speed Front2 Fan Speed Rear1 Fan Speed Rear2 Fan Speed Smart Fan Control VCORE1 Voltage VCORE2 Voltage...
  • Page 94 Front1 Fan Speed • ????RPM [Default] • Ignored Front2 Fan Speed • ????RPM [Default] • Ignored Rear1 Fan Speed • ????RPM [Default] • Ignored Rear2 Fan Speed • ????RPM [Default] • Ignored Smart Fan Control • Enabled [Default] • Disabled VCORE1 Voltage •...

  • Page 95: Boot Menu

    Boot Menu This menu configures boot options Main Advanced Power Boot Settings 8Boot Device Priority 8Boot Settings Configuration 8Security v02.53 (C) Copyright 1985-2002, American Magatrends, Inc. A detailed description of each of the features is given in the following table. Table 51: Boot Menu Feature Options...
  • Page 96 Boot / Boot device Priority Sub-menu This menu configures boot device priority Main Advanced Power Boot Device Priority 1st Boot Device 2nd Boot Device 3rd Boot Device 4th Boot Device v02.53 (C) Copyright 1985-2002, American Magatrends, Inc. Figure 51: Boot / Boot device Priority Sub-menu A detailed description of each of the features is given in the following table.
  • Page 97 Boot Device • Floppy drive • HDD detected • CD-ROM optical drive detected[Default] • MBA V7.6.6 Slot 0200 • Disabled Boot Device • Floppy drive[Default] • HDD detected • CD-ROM optical drive detected • MBA V7.6.6 Slot 0200[Default] • Disabled Vig390s Motherboard Manual V1.0 boot device selection Allows the 3...
  • Page 98 Boot / Hard Drives Sub-menu This menu allows the HDD boot order to be configured Main Advanced Power Hard Drives 1st Boot Device 2nd Boot Device 3rd Boot Device v02.53 (C) Copyright 1985-2002, American Magatrends, Inc. Figure 52: Boot / Hard Drives sub menu A detailed description of each of the features is given in the following table.
  • Page 99 Boot / Boot Setting Configuration Sub-menu This menu sets BIOS boot options Main Advanced Power Boot Setting Configuration Quick Boot Full Screen Logo Bootup Num-Lock PS/2 Mouse Support Wait For “F1” If Error Hit “DEL” Message Display Interrupt 19 capture v02.53 (C) Copyright 1985-2002, American Magatrends, Inc.
  • Page 100 Boot / Security Settings Sub-menu This menu configures the system supervisor and user passwords Main Advanced Power Security Settings Supervisor Password : Not Installed User Password : Not Installed Change Supervisor Password User Access Level Change User Password Clear User Password Password Check v02.53 (C) Copyright 1985-2002, American Magatrends, Inc.
  • Page 101 Clear User None Password Password Check • Setup [default] • Always Vig390s Motherboard Manual V1.0 Will not be displayed unless a “Supervisor Password” has been set. Press <Enter> to display Clear User password select “Ok” or “Cancel” with “←” or “→” arrow keys and <Enter> to confirm. Will not be displayed unless a “Supervisor Password”...

  • Page 102: Exit Menu

    Exit menu This menu gives the BIOS utility exit options Main Advanced Power Exit options Exit & Save Changes Exit & Discard Changes Discard Changes Load Setup Defaults v02.53 (C) Copyright 1985-2002, American Magatrends, Inc. A detailed description of each of the features is given in the following table. Table 56: Exit Menu Feature Options...

  • Page 103: Upgrading The Bios

    You can upgrade to a new version of the BIOS using the new BIOS files and the BIOS upgrade utility, iFLASH.EXE. You can obtain the BIOS upgrade file and the iFLASH.EXE utility through your computer supplier or from the Intel World Wide Web site:...
  • Page 104 STEP TWO: Creating a Bootable Floppy Diskette 1. Use a DOS or Windows 95/98 system to create the floppy disk. 2. Insert a floppy disk in floppy drive A. 3. At the C:\ prompt, for an unformatted floppy disk, type: format a:/s Or, for a formatted floppy disk, type: sys a:...
  • Page 105 5. An example is shown below of BIOS upgrade utility running. Warning: DO NOT SWITCH OFF THE SYSTEM WHILE THE BIOS IS BEING UPGRADED. Figure 56: BIOS Upgrading 6. Once the utility has finished as shown bellow shut down the system. Figure 57: BIOS Update Complete 7.

  • Page 106: Chapter 5 Technical Information

    Chapter 5: Technical Information Note: This chapter is indented for experienced users only, and only to be used as a reference. Changes to or modify any of the components/ connectors listed herein can and will seriously damage your system, including the motherboard, CPU and/or any other hardware.

  • Page 107: Operating Systems And Hard Drives

    Operating Systems and Hard Drives Standard CHS is the translation that has been used for years. Its use limits IDE capacity to maximum of 528MB regardless of the size of the drive used. Logical Block mode overcomes the 528MB maximum size limitation imposed by the Standard CHS mode.

  • Page 108: Connector Signal Details

    Connector Signal Details Table 57: Wake on Ring Connector Signal Name Ground RINGA# Table 58: Wake on LAN Connector Signal Name +5 VSB Ground Table 59: Fan 3 Connector Signal Name Ground FAN_CTRL (+12 V) FAN_SEN* Table 60: Auxiliary Line In Connector Signal Name Left Line In Ground...
  • Page 109 Table 65: Fan Connector (Front 1,Front 2,Rear1 and Rear2) Signal Name Ground FAN_CTRL (+12 V) FAN_SEN* Table 66: Serial ATA Connector Signal Name Ground Ground Ground Table 67: Floppy Drive Connector Signal Name Ground Ground Ground Ground Ground Ground Ground No Connect Ground Ground...
  • Page 110 Address 0 Chip Select 1P# [Chip Select 1S#] Activity# NOTE: Signal names in brackets ([ ]) are for the secondary IDE connector. Table 69: Accelerated Graphics Port Signal Name +12V No Connect Reserved No Connect Ground INTA# RST# GNT1# Vcc3.3 Reserved PIPE# Ground...

  • Page 111: Power Supply Connector

    Power Supply Connector When used with an SSI ATX-compliant power supply that supports remote power on/off, the motherboard can turn off the system power through software control. To enable soft-off control in software, advanced power management must be enabled in the Setup program and in the operating system. When the system BIOS receives the correct APM command from the operating system, the BIOS turns off power to the computer.
  • Page 112 USBP0# [USBP1#] USBP0 [USBP1] Ground Table 73: Serial Port Connectors Signal Name Serial In # Serial Out # DTR# Ground Table 74: Audio Line Out Connector Signal Name Sleeve Ground Audio Left Out Ring Audio Right Out Table 75: Audio Line In Connector Signal Name Sleeve Ground...
  • Page 113 Table 78: MIDI / Game Port Connector Signal Name +5 V (fused) GP4 (JSBUTO) GP0 (JSX1) Ground Ground GP1 (JSY1) GP5 (JSBUT1) +5 V (fused) Table 79: PCI Bus Connectors Signal Name Ground (TRST#)* +12 V +5 V (TMS)* +5 V (TDI)* +5 V INTA# INTC#...

  • Page 114: Motherboard Resources

    Motherboard Resources Table 80: Typical Memory Map Address Range Address Range (hex) (decimal) 1024 K - 393216 K 100000 - 18000000 928 K - 1024 K E8000 - FFFFF 896 K - 928 K E0000 - E7FFF 800 - 896 K C8000 - DFFFF 640 K - 800 K A0000 - C7FFF...
  • Page 115 Turbo and reset control register Function Number (hex) Description Intel 82440BX (PAC) Intel 82440BX (PAC) AGP bus Intel 82371AB (PIIX4E ) PCI/ISA bridge Intel 82371AB (PIIX4E ) IDE bus master Intel 82371AB (PIIX4E ) USB Intel 82371AB (PIIX4E ) power management...

  • Page 116: Other Information

    Other Information Reliability The mean time between failures (MTBF) prediction is calculated using component and subassembly random failure rates. The calculation is based on the Bellcore Reliability Prediction Procedure, TR-NWT-000332, Issue 4, September 1991. The MTBF prediction is for: • Redesigning the motherboard for alternate components if failure rates exceed reliability expectations.

  • Page 117: Chapter 6 Glossary

    Chapter 6: Glossary Advanced Dynamic Execution Part of the Pentium® 4 processor's Intel® NetBurst® micro-architecture. Improved branch prediction algorithm accelerates the flow of work to the processor and helps overcome the deeper pipeline. Very deep, out-of-order speculative execution allows the processor to view 126 instructions in flight and handle up to 48 loads and 24 stores in the pipeline.
  • Page 118 Execution Trace Cache (Level 1 Execution Trace Cache) Part of the Pentium® 4 processor's Intel® NetBurst® micro-architecture. In addition to the 8 KB data cache, the Pentium 4 processor includes an Execution Trace Cache that stores up to 12 K decoded micro-ops in the order of program execution.
  • Page 119 Light Emitting Diode - a light which indicates activity - for example hard disk access. PCI (Peripheral Component Interconnect) Developed by Intel, PCI is a local bus standard. A bus is a channel used to transfer data to (input) and from (output) a computer and to or from a peripheral device. Most PCs have a PCI bus usually implemented at 32-bits providing a 33 MHz clock speed with a throughput rate of 133 MBps.
  • Page 120 RAM. Rapid Execution Engine Part of the Pentium® 4 processor's Intel® NetBurst® micro-architecture. Two Arithmetic Logic Units (ALUs) are clocked at twice the core processor frequency, allowing basic integer instructions such as Add, Subtract, Logical AND, and Logical OR to execute in half of a clock cycle.

  • Page 121: Notes

    Notes Vig390s Motherboard Manual V1.0...

  • Page 122: Chapter 7 Suggestions

    Chapter 7: Suggestions Viglen is interested in continuing to improve the quality and information provided in their manuals. Viglen has listed some questions that you may like to answer and return to Viglen. This will help Viglen help to keep and improve the standard of their manuals.
  • Page 123 5. How do you rate the Viglen Technical support and Service Departments? Are there any technological improvements that could be made to the system? 7. Other points you would like to mention? Please return this slip to: Vig390s Motherboard Manual V1.0 Product Development Dept.