Likewise, do not DEH-2700 • Secure the wiring with cable clamps or adhesive connect the blue/white lead to the power terminal tape. To protect the wiring, wrap adhesive tape of the auto-antenna.
Page 20
Power amp This Product (sold separately) Rear output Jack for the Wired Remote Control Connecting cords Please see the Instruction Manual for the with RCA pin plugs Fuse Wired Remote Control (sold separately). (sold separately) Antenna jack Blue/white To system control terminal of the power amp or Auto-antenna relay control terminal (max.
Installation Note: Removing the Unit (Fig. 5) (Fig. 6) • Before making a final installation of the unit, tem- • If installation angle exceeds 60° from horizontal, porarily connect the wiring to confirm that the con- the unit might not give its optimum performance. nections are correct and the system works proper- (Fig.
DIN Rear-mount About the fixing screws for the front panel If you do not operate the Detaching and Replacing the Front Panel Function, use the sup- plied fixing screws and fix the front panel to this unit. Installation using the screw holes on the side of the unit 1.