Integra DTR-5.8 Instruction Manual page 61

Using the Listening Modes—Continued
Dolby Digital, Dolby Digital Plus, and TrueHD Sources
Source format
Media
Listening mode
Direct
Stereo
Multichannel
Dolby D
Dolby Digital Plus
DTS, DTS 96/24
DTS Discrete/Matrix
DTS-HD High Resolution
Audio
DTS-HD Master Audio
TrueHD
Dolby PLII Movie/
*3
Dolby PLIIx Movie
Dolby PLII Music/
*3
Dolby PLIIx Music
Dolby PLII Game/
*3
Dolby PLIIx Game
Dolby Digital EX/Dolby EX
Neo:6
Neo:6 Cinema
Neo:6 Music
Neural Surround (North
American model only)
Mono
*4
Mono Movie
*4
Orchestra
*4
Unplugged
*4
Studio-Mix
*4
TV Logic
All Ch Stereo
Full Mono
T-D
*1. During input of a 96 kHz TrueHD signal, the only sound balance or sound quality adjustment that can be made is Tone control. The AV receiver
does not respond to a 192 kHz TrueHD signal.
*2. If there are no surround back speakers, depending on the input signal, Dolby Digital may be used.
*3. If there are no surround back speakers, or Powered Zone 2 is being used, Dolby Pro Logic II is used.
*4. Available only when using surround speakers.
: Requires 6.1/7.1 speakers. Not available while Powered Zone 2 is being used.
: Requires 7.1 speakers. Not available while Powered Zone 2 is being used.
Tip: To check the format of the digital input signal, see "Displaying Source Information" on page 55.
Dolby D
Multichannel
2ch 1/0, 1+1
except
*/2
*/2
DVD, DTV, etc.
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔
✔
✔
✔
✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
Dolby Digital Plus
Multichannel
2ch 1/0, 1+1
except
*/2
*/2
Blu-ray, HD DVD
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔
*2 *2
✔ ✔
✔ ✔
✔
✔
✔
✔
✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
*1
TrueHD
Multi-
2ch 1/0, 1+1
channel
Blu-ray, HD DVD
✔ ✔ ✔
✔ ✔ ✔
✔
61