Using the Listening Modes
Selecting Listening Modes
See "About the Listening Modes" on page 64 for
detailed information about the listening modes.
• The Dolby Digital and DTS listening modes
can only be selected if your DVD player is
connected to the AV receiver with a digital
audio connection (coaxial or optical).
• Listening mode availability depends on the
format of the current input signal.
Selecting on the AV receiver
Stereo
Listening Mode
■ [Stereo] button
This button selects the Stereo listening mode.
■ Listening Mode [
]/[
Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.
] buttons
Selecting with the Remote Controller
Stereo
Surround
■ [Surround] button
This button selects the Dolby Digital and DTS listen-
ing modes and the Neural Surround
(*North American models only).
■ [Stereo] button
This button selects the Stereo listening mode.
■ Listening Mode [
]/[
Pressing these buttons repeatedly cycles through all
of the listening modes that can be used with the cur-
rent input source.
Listening
Mode
/
*
listening mode
] buttons
59