Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Swann 1080P PTZ IP Camera
Summary of Contents for Swann 1080P PTZ IP Camera
- Page 1 1080P PTZ IP Camera INSTRUCTION MANUAL...
-
Page 2: Warranty Information
Any unit which proves defective during the stated period will be repaired without charge for parts or labour or replaced at the sole discretion of Swann. The end user is responsible for all freight charges incurred to send the product to a Swann repair centre. The end user is responsible for all shipping costs incurred when shipping from and to any country other than the country of origin. -
Page 3: Table Of Contents
Contents Warranty Information Contents Introduction Safety Information Layout of the Camera Preparing the Camera Mounting Bracket Mounting the Camera Connecting the Camera to your NVR Using the Camera Camera Management: PTZ: More Settings... -
Page 4: Introduction
Introduction Congratulations on your purchase of this Swann 1080P PTZ IP Camera! It is an ideal solution for monitoring a large area - a combination of a high quality CMOS image sensor mounted in a contained dome with the option to fully pan 360 degrees. Nothing will be out of sight for long. -
Page 5: Layout Of The Camera
Layout of the Camera (1) Mounting Bracket: The supplied mounting bracket can be screwed onto any flat vertical surface. (2) Safety Cable Connection: One end of the provided safety cable connects here, and the other end connects to the camera housing. (3) Pendant Adapter: The supplied adapter basically connects the camera to the mounting... -
Page 6: Mounting Bracket
Mounting Bracket Before installing the mounting bracket, you need to decide where the camera will be placed. (1): When you have selected the desired location, place the mounting bracket onto the surface and mark where the mounting screws are going to be placed. - Page 7 Mounting the Camera (ctd) (5): Secure one end of the provided safety cable to the mounting bracket, and the other end to the camera. We’re nearly there, just need to connect the power terminal cable and the grey coloured Ethernet & power cable.
-
Page 8: Connecting The Camera To Your Nvr
Connecting the Camera to your NVR Connect the power adapter to the female connection located on the Ethernet and power Connect the power adapter to cable. Connect the Ethernet a spare wall socket. connection to a spare video input on the NVR. Using the Camera The IP PTZ camera operates in the same fashion as the standard IP cameras that are included with your NVR. -
Page 9: Camera Management: Ptz: More Settings
Using the Camera (ctd) Patrol: Click this to select a different patrol preset. A patrol is a memorised series of different preset positions. A single patrol can be configured with up to 32 different preset positions. Press the ‘play’ button to start a patrol and press the ‘stop’ button to stop. Pattern: This option is not available with this camera. - Page 10 Helpdesk / Technical Support Details Swann Technical Support All Countries E-mail: tech@swann.com Telephone Helpdesk USA Toll Free 1-800-627-2799 USA Exchange & Repairs 1-800-627-2799 (Option 1) (M-F, 9am-5pm US PT) AUSTRALIA 1300 138 324 NEW ZEALAND Toll Free 0800 479 266...