Download
Share
Print this page
Fein 9-77-25 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Fein Manuals
  4. Vacuum Cleaner
  5. 9-77-25
  6. Operating instructions manual

Fein 9-77-25 Operating Instructions Manual

Hide thumbs Also See for 9-77-25:
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
FEIN Turbo Vac III

Operating Instructions

•
Make sure that the voltage nameplate of the device corresponds to the voltage of
your network. The plug has to be protected with a minimum of 20 Amps.
IMPORTANT! THE VACUUM CLEANER IS SUPPLIED FROM THE
FACTORY WITH A SUPPLY CABLE WITH A GROUNDED PLUG. IT
MUST ONLY BE CONNECTED TO AN APPROVED GROUNDED
SOCKET.
•
Before performing any maintenance work, unplug the vacuum from the outlet.
•
WARNING! EXPLOSION AND FIRE HAZARD! Never vacuum flammable
fluids or gas, oil, alcohol, solvents, etc. Do not operate near flammable fluids or
gas. Never vacuum warm fluids or materials at more than 140º Fahrenheit
(60º Celsius), such as burning cigarettes, ashes, glowing coals, etc.
•
WARNING! DO NOT VACUUM HAZARDOUS/CARCINOGENIC DUST
UNLESS THE OPTIONAL HEPA FILTER IS INSTALLED.
•
Do not pull the vac by the cable and do not damage the insulation on the cable.
If the cable is damaged, it must be replaced immediately.
•
Always keep the filter cartridge clean so the vacuum cleaner operates properly.
9-77-25
ATTENTION: READ BEFORE USING

Advertisement

loading

Related Manuals for Fein 9-77-25

Summary of Contents for Fein 9-77-25

  • Page 1: Operating Instructions

    FEIN Turbo Vac III 9-77-25 Operating Instructions ATTENTION: READ BEFORE USING • Make sure that the voltage nameplate of the device corresponds to the voltage of your network. The plug has to be protected with a minimum of 20 Amps.

  • Page 2: Assembly Instructions

    ASSEMBLY INSTRUCTIONS To attach the wheels, press the wheel posts into the four holes provided. a) Connect the vacuum end of hose 2 to the receptacle Q by pressing in. In order to remove the hose, slightly turn and pull the hose out simultaneously.

  • Page 3: Suction Of Dry Dust And Dirt

    SUCTION OF DRY DUST AND DIRT The cloth filter that came with your FEIN Turbo III will contain extracted dust, 5.0 microns in size and larger. If picking up fine dust, you will need to use a pleated filter cartridge and paper bag, which can be purchased as a (FBK-3) kit . (see page 6 for kit contents).
  • Page 4 9-77-25 TURBO III VAC DESCRIPTION PART NUMBER ITEM # POWER CABLE 3-07-05-065-99-9 SCREW 901A11A89 CABLE CLAMP 101035K00 SCREW 901A19A89 WASHER 901D07AG87 TERMINAL 905217000 SWITCH CABLE 905320AU02 SCREW 901A16A89 COVER (NEW STYLE) 521006K13 SWITCH (M/A) 905308000 GASKET 905239A000 ELECTRONIC 905331R00 SWITCH (ON/OFF)

  • Page 5: Suction Of Fluids

    SUCTION OF DRY DUST AND DIRT (continued) ATTENTION: If suction pressure decreases, replace the paper dust bag H with a new one. From time to time the filter cartridge G should be cleaned with a soft brush, ensuring longer life and higher perfor- mance.
  • Page 6 9-77-25 TURBO III VAC ACCESSORIES Item Part Number Description 921001AK13 Extension tube (order 2) 921085AK13 Handle 921081CD13 Floor nozzle 921003AK13 Upholstery nozzle 921002AK13 Brush 921004AK13 Crevice tool 90204200 Anti-foam filter TII1MCRN 1Micron filter TIIHEPA Hepa filter 0.3 microns TII3002 Flange filter...

  • Page 7: Maintenance

    Always keep a reserve of paper dust bags and filter cartridges, so that the vacuum is always ready for use. FEIN Power Tools Inc. 1030 Alcon Street Pittsburgh, PA 15220 (800) 441-9878...

This manual is also suitable for:

Turbo iii 9-77-25