™ EZ Connect ADSL Ethernet Modem • Supports both G.DMT and G.lite • Interoperable with most major DSLAMs • Always-on digital connection • Bridging and routing functions • Management: SNMP, MIB II, Telnet, GUI Quick Install Guide SMC70032AE...
CHAPTER 1 Package Contents After unpacking the SMC70032AE, check the contents of the box to be sure you’ve received the following components ① Modem ② RJ-11 phone cord ③ RJ-45 Ethernet cable ④ Console Cable ⑤ Power adapter (110/220V, 60Hz) ⑥...
LED Indicators Rx: Indicates data is being received. Tx: Indicates data is being transmitted. 3. Sync: In dicates the physical connection between the Modem and the Service Provider’s DSLAM. While the modem is connecting, the LED will blink and then stay in the "ON" state ( green) once the connection has been made.
RS-232C port (a DB9 Male port usually assigned to COM1 or COM2) to the “CONSOLE” port on the back of the SMC70032AE modem (a DB9 Female port). Setting up the modem requires a terminal emulation program such as HyperTerminal to access the command line interface program of the modem.
Page 6
③ Console Cable ② ④ Lan Cable ① Telephone Line (Figure 1-1) ① ④ ② ③ (Figure 1-2 SMC70032AE Back Panel) Rear view of SMC70032AE...
Top view of SMC70032AE WebConsole Installation As soon you insert the included CD into the CD-ROM drive, Windows will prompt you with the following screen. Click WebConsole Installation...
Page 8
When AutoPlay is launched the following window will appear. Click Next When the following License Agreement appears, Click Yes To install WebConsole in the following folder, Click Next.
Page 9
Click Next to continue. Click the Finish button. launch WebConsole Program clicking SMC700032AE Icon on the desktop.
Manually Launching the WebConsole Program If the Webconsole Program is not running properly, open My Computer. Press the right button of the mouse and click Properties. Click AutoPlay...
Removing the WebConsole Program As soon you inserted the provided CD into CD-ROM, Windows will prompt as follows. Click Uninstall WebConsole to remove the WebConsole program. Click OK to remove the program. Click Finish to complete removing the WebConsole program.
Manually Removing the WebConsole Program If the Webconsole Program is not running properly, open My Computer. Click Control Panel. Click Add/Remove Program. Select “WebConsole” and click the Add/Remove button.
Page 13
Click OK to remove the program. Click Finish to complete removing the WebConsole program.
Page 14
FOR TECHNICAL SUPPORT CALL: From U.S.A. and Canada 24 hours (800) SMC-4-YOU; (949) 707-2400; (949) 707-2460 (Fax) From Europe (8:00 AM - 5:30 PM UK Greenwich Mean Time) 44 (0) 1344 420068; 44 (0) 1344 418835 (Fax) INTERNET E-mail addresses: techsupport@smc.com Driver updates: http://www.smc.com/support.html...