Advertisement
NOTE:
Please read all instructions
carefully before using this
product
Table of Contents
Safety Notice
Hardware Identifier
Assembly Instruction
Parts List
Warranty
Ordering Parts
Model
WM-357
Retain This
Manual for
Reference
06-26-06
OWNER'S
MANUAL
COMPETITOR
WEIGHT BENCH
14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746
Tel: (800) 999-8899 Fax: (626) 961-9966
www.impex-fitness.com
info@impex-fitness.com
WM-357
®
IMPEX
INC.
Advertisement
Table of Contents
Related Manuals for Impex COMPETITOR WM-357
Summary of Contents for Impex COMPETITOR WM-357
- Page 1 Please read all instructions carefully before using this product Table of Contents Safety Notice Hardware Identifier Assembly Instruction Parts List Warranty Ordering Parts Model WM-357 Retain This Manual for Reference 06-26-06 OWNER'S MANUAL COMPETITOR WEIGHT BENCH WM-357 IMPEX 14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746 Tel: (800) 999-8899 Fax: (626) 961-9966 www.impex-fitness.com...
-
Page 2: Table Of Contents
EXPLODED DIAGRAM………………………………………………………………. PARTS LIST...……. WARRANTY...…. ORDERING PARTS...… BEFORE YOU BEGIN Thank you for selecting the COMPETITOR WM-357 Weight Bench by ® IMPEX INC. For your safety and benefit, read this manual carefully before using the machine. complete customer satisfaction. If you have any questions, or find there are missing or damaged parts, we guarantee you complete satisfaction through direct assistance from our factory. -
Page 3: Important Safety Notices
BEFORE BEGINNING ANY EXERCISE PROGRAM, CONSULT YOUR PHYSICIAN. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. IMPEX INC. ASSUMES RESPONSIBILITY SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT. - Page 4 WARNING LABEL REPLACEMENT The Warning Label shown here has been placed on the Cross Brace. If the label is missing or illegible, please call customer service at 1-800-999-8899 for replacement. Apply the label in location shown.
-
Page 5: Hardware Identifier
HARDWARE IDENTIFIER... -
Page 6: Assembly Instructions
ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury. STEP 1 (See Diagram 1) A.) Plug the two Upright End Caps (#24) onto the bottom of the Right & Left Upright Beams (#1 &... - Page 7 STEP 2 (See Diagram 2) A.) Plug a Front Leg End Cap (#27) onto the bottom of Front Leg (#5). Attach the Front Leg to the Main Seat Support (#3). Secure it with three M8 x 5/8” Allen Bolts (#38) and Ø...
- Page 8 STEP 3 (See Diagram 3) A.) Attach the Leg Developer (#7) to the Front Leg (#5). Secure it with one M8 x 3 1/8” Allen Bolt (#39), two Ø 5/8” Washers (#44), and one M8 Aircraft Nut (#49). B.) Insert two Foam Tubes (#13) halfway through the holes on the Leg Developer. Push four Foam Rolls (#30) onto the Tubes from both sides.
- Page 9 STEP 4 (See Diagram 4) A.) Attach the Backrest Supports (#12) onto both ends of the pivot on the Main Seat Support (#3). Place the other end rest against the Backrest Adjustment Bar (#35). B.) Place the Backrest Board (#34) onto the Backrest Supports. Secure it with four M6 x 1 ½” Hex Bolts (#41) and Ø...
- Page 10 STEP 5 (See Diagram 5) A.) Attach the Arm Curl Pad (#32) to the Arm Curl Stand (#6). Secure it with two M8 x 5/8” Allen Bolts (#38) and Ø 5/8” Washers (#44). B.) Insert the Arm Curl Stand into the top opening on the Front Leg. Secure it with a Lock Knob (#16).
-
Page 12: Parts List
PARTS LIST KEY NO. DESCRIPTION Right Upright Beam Left Upright Beam Main Seat Support Cross Brace Front Leg Arm Curl Stand Leg Developer Weight Post Arm Curl Handle Main Seat Stabilizer Arm Curl Handle Bar Backrest Support Foam Tube Curved Bracket L-shaped Lock Pin Lock Knob Arm Curl Handle Grip... -
Page 13: Warranty
IMPEX authorized service center or for products used for commercial or rental purposes. No other warranty beyond that specifically set forth above is authorized by IMPEX.