Impex MARCY SM 4000 Owner's Manual page 10

STEP 4 (See Diagram 4)
A.) Attach the Weight Glide Post (#7) to the Weight Glide Base (#8). Secure it with four M10 x
1" Carriage Bolts (#74), Ø ¾" Washers (#66) and M10 Aircraft Nuts (#86).
B.) Slide the Sliding Weight Post (#14) onto the Post from the top. Place the Upper Frame
(#9) onto the Weight Glide Post (#7), Rear Vertical Beam (#6) and Front Top Beam (#15).
C.) Align the holes. Secure the Upper Frame (#9) to the Weight Glide Post (#7) with two M10
x 3" Allen Bolts (#71), four Ø ¾" Washers (#66), and two M10 Aircraft Nuts (#86). Do not
tighten the Nuts and Bolts yet.
D.) Secure the Upper Frame to the Rear Vertical Beam with two M10 x 2 ¾" Carriage Bolts
(#75), ¾" Washers (#66) and M10 Aircraft Nuts (#86).
E.) Secure the Upper Frame to the Front Top Beam with two M10 x 3 1/8" Carriage Bolts
(#77), one 5 1/8" x 2 3/8" Bracket (#35), two Ø ¾" Washers (#66), and two M10 Aircraft
Nuts (#86). Securely tighten all Nuts and Bolts previously installed.
9
DIAGRAM 4