Impex MARCY MCB-880M Owner's Manual
  1. Manuals
  2. Brands
  3. Impex Manuals
  4. Home Gym
  5. MARCY MCB-880M
  6. Owner's manual
Impex MARCY MCB-880M Owner's Manual

Impex MARCY MCB-880M Owner's Manual

Classic mid-size bench
Hide thumbs
Table of Contents

Advertisement

Quick Links

NOTE:
Please read all instructions
carefully before using this
product
Table of Contents
Safety Notice
Hardware Pack
Assembly Instruction
Parts List
Resistance Chart
Warranty
Ordering Parts
Model
MCB-880M
Retain This
Manual for
Reference
09-26-06
OWNER'S
MANUAL
MARCY
MID-SIZE BENCH
14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746
Tel: (800) 999-8899 Fax: (626) 961-9966
www.impex-fitness.com
info@impex-fitness.com
®
CLASSIC
MCB-880M
®
IMPEX
INC.

Advertisement

Table of Contents
loading

Related Manuals for Impex MARCY MCB-880M

Summary of Contents for Impex MARCY MCB-880M

  • Page 1 Table of Contents Safety Notice Hardware Pack Assembly Instruction Parts List Resistance Chart Warranty Ordering Parts Model MCB-880M Retain This Manual for Reference 09-26-06 OWNER'S MANUAL MARCY MID-SIZE BENCH MCB-880M IMPEX 14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746 Tel: (800) 999-8899 Fax: (626) 961-9966 www.impex-fitness.com...

  • Page 2: Table Of Contents

    PARTS LIST…………………………………………………………….……….……. WARRANTY...… ORDERING PARTS... BEFORE YOU BEGIN Thank you for selecting the MARCY CLASSIC MCB-880M MID-SIZE ® BENCH by IMPEX carefully before using the machine. As a manufacturer, we are committed to provide you complete customer satisfaction. If you have any questions, or find there are missing or damaged parts, we guarantee you complete satisfaction through direct assistance from our factory.

  • Page 3: Important Safety Notices

    AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING ANY FITNESS EQUIPMENT. ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTAINED BY OR THROUGH THE USE OF THIS PRODUCT. SAVE THESE INSTRUCTIONS. IMPEX INC.
  • Page 4 WARNING LABEL REPLACEMENT The warning labels shown here have been placed on the Front Stabilizer and Lat Bar Frame. If the labels are missing or illegible, please call customer service at 1-800-888-8899 for replacements. Apply the labels in location shown.

  • Page 5: Hardware Pack

    HARDWARE PACK...
  • Page 6 HARDWARE PACK...

  • Page 7: Assembly Instructions

    ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended two or people assembling this machine to avoid possible injury. STEP 1 (See Diagram 1) A.) Attach the two Base Frames (#65) together on a flat surface. Attach the Left & Right Upright Beams (#67 &...
  • Page 8 STEP 2 (See Diagram 2) A.) Attach the Lat Bar Frame Support (#66) onto the joint of the two Base Frames (#65). Align the holes and secure them together with two M10 x 3 ¾” Carriage Bolts (#46), Ø ¾” Washers (#39) and M10 Aircraft Nuts (#51).
  • Page 9 STEP 3 (See Diagram 3) A.) Attach the 57” Cable (#74) to a Pulley (#57). Attach the Pulley to the top opening on the Lat Bar Frame (#70). Secure it with a M10 x 2 3/8” Allen Bolt (#48), two Pulley Bushings (#59), and one M10 Aircraft Nut (#51).
  • Page 10 STEP 4 (See Diagram 4) A.) Attach the Main Frame (#1) onto the Front & Rear Stabilizers (#2 & #6). Secure each end with two M10 x ¾” Allen Bolts (#32) and Ø ¾” Washers (#39). DIAGRAM 4...
  • Page 11 STEP 5 (See Diagram 5) A.) Attach the two Backrest Supports (#3) to the pivot on the Main Frame (#1). Secure it with one M12 x 5 ¾” Allen Bolt (#31), two Ø1” Washers (#38), and one M12 Aircraft Nut (#36). Do not over tighten the nut and bolt.
  • Page 12 STEP 6 (See Diagram 6) A.) Attach the Leg Developer (#5) to the open bracket on the Main Frame (#1). Secure it with one Axle (#42), two M10 x 5/8” Allen Bolts (#30), and two Ø ¾” Washers (#39). Do not over tighten the bolts. Make sure the Leg Developer is able to swivel. B.) Insert the U-shaped Pin (#10) into the tube in front of the Main Frame.
  • Page 13 STEP 7 (See Diagram 7) A.) Attach the Arm Curl Pad (#13) to the Arm Curl Stand (#7). Secure it with two M8 x ¾” Allen Bolts (#33) and Ø 5/8” Washers (#40). B.) Insert the Arm Curl Stand into the front opening on the Main Frame. Use a Lock Knob (#16) to secure the Stand at desired height.

  • Page 14: Exploded Diagram

    EXPLODED DIAGRAM...

  • Page 16: Parts List

    U-shaped Pin Seat Pad Backrest Board Arm Curl Pad Olympic Sleeve Spring Clip Lock Knob (Impex Logo) 2 3/8” x 1 5/8” End Cap 1” Square End Cap Ø Cone-shaped End Cap Ø 1” End Cap Foam Roll End Cap Ø...

  • Page 17: Warranty

    IMPEX Customer Service Department at 1-800-999-8899. All freights on products returned to IMPEX must be prepaid by the customer. This warranty does not extend to any product or damage to a product caused by or attributable to freight damage, abuse, misuse, improper or abnormal usage or repairs not provided by an IMPEX authorized service center or for products used for commercial or rental purposes.

Table of Contents