Page 1
Patent Pending Model No. IMTL11900 Serial No. Write the serial number in the space above for future reference. Serial Number Decal QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If you have questions, or if there are...
450 joules. The surge suppressor must be electrically rated for 120 volts AC and 15 amps. To purchase a surge suppressor, see your local IMAGE dealer or call 1-800-999-3756 and order part number 146148. 12. Keep the power cord and the surge suppres-...
Page 3
13. Never move the walking belt while the power is turned off. Do not operate the treadmill if the power cord or plug is damaged, or if the treadmill is not working properly. (See BEFORE YOU BEGIN on page 4 if the tread- mill is not working properly.)
The model number of the treadmill is IMTL11900. The serial num- ber can be found on a decal attached to the treadmill (see the front cover of this manual for the location).
This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
If heart rate readings do not appear until you begin perspiring, re-wet the electrode areas. ¥ As you walk or run on the treadmill, position your- self near the center of the walking belt. For the console to display heart rate readings, the user must be within armÕs length of the console.
(see drawing 1 at the right). To purchase a surge suppressor, see your local IMAGE dealer or call 1-800-999-3756 and order part number 146148. Use only a single-outlet surge sup- pressor that is UL 1449 listed as a transient voltage surge suppressor (TVSS).
Page 8
When the manual mode is selected, the speed and in- cline of the treadmill can be changed with a touch of a button. As you exercise, the LED track and the four dis- plays will provide continuous exercise feedback.
Page 9
0.5%. The buttons can be held down to change the incline quickly. Note: It may take a few seconds for the treadmill to reach the selected incline setting. Follow your progress with the LED track and the four displays.
Page 10
M4), and four high-intensity programs (H1 to H4). The profiles on the sides of the console show how the speed and incline of the treadmill will change during the programs. The numbers beside the profiles show the maximum speed and incline set- tings for the programs.
Page 11
THE INFORMATION MODE/DEMO MODE The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also allows you to switch the console from miles to kilome- ters and to turn the demo mode off and on.
PROBLEM: The power turns off during use SOLUTION: a. Check the circuit breaker located on the treadmill near the power cord. If the circuit breaker has tripped, wait for five minutes and then press the switch back in. b. Make sure that the power cord is plugged in.
Page 13
SOLUTION: a. With the key in the console, press one of the INCLINE buttons. While the incline is changing, remove the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the maximum incline level and then return to the minimum level. This will recalibrate the incline system.
Page 14
PROBLEM: The heart rate monitor does not function properly SOLUTION: a. If the heart rate monitor does not function properly, see HEART RATE MONITOR TROUBLE- SHOOTING on page 6. b. If the heart rate monitor still does not function properly, the battery should be changed.
CONDITIONING GUIDELINES WARNING: Before beginning any exercise program, consult your physi- cian. This is especially important for individu- als over the age of 35 or individuals with pre- existing health problems. The heart rate monitor is not a medical de- vice.
Page 16
PART LISTÑModel No. IMTL11900 Note: To identify the parts listed below, refer to the EXPLODED DRAWING attached in the center of this manual. Key No. Qty. Description Console Base Screw Belly Pan Screw Idler Arm Assembly Nylon Washer Incline Bolt...
Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). When ordering parts, please be prepared to give the following information: When requesting help or service, or ordering parts, please be prepared to provide the following information: ¥ The MODEL NUMBER of the product (IMTL11900) ¥ The NAME of the product (IMAGE ¨...
This warranty gives you specific legal rights and you may have other rights which vary from state to state. ICON HEALTH & FITNESS, INC., 1500 S. 1000 W., LOGAN, UT 84321-9813 IMAGE is a registered trademark of ICON Health & Fitness, Inc. Part No. 167492 R0900A...