Table of Contents
Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures� Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number)�
Keep this manual and the receipt in a safe and dry place for future reference�
12 SettinG
email our technical support at: productsupport@harborfreight.com
reV 14h
When unpacking, make sure that the product is intact
and undamaged� If any parts are missing or broken,
please call 1‑888‑866‑5797 as soon as possible�
©
Copyright
2012 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools�
Diagrams within this manual may not be drawn proportionally� Due to continuing
improvements, actual product may differ slightly from the product described herein�
Tools required for assembly and service may not be included�
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
� All rights reserved�
read this material before using this product.
Failure to do so can result in serious injury.
SaVe tHiS ManuaL.
Advertisement
Table of Contents
Related Manuals for Chicago Electric 69343
Summary of Contents for Chicago Electric 69343
- Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools� Diagrams within this manual may not be drawn proportionally� Due to continuing SaVe tHiS ManuaL.
-
Page 2: Table Of Contents
2� Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. Page 2 For technical questions, please call 1-888-866-5797. Item 69343... -
Page 3: Electrical Safety
Unapproved safety equipment may not provide adequate protection. Eye protection must be ANSI-approved and breathing protection must be NIOSH-approved for the specific hazards in the work area. Item 69343 For technical questions, please call 1-888-866-5797. Page 3... -
Page 4: Power Tool Use And Care
1950 is likely to contain lead� Once 4� Persons removing paint should deposited on surfaces, hand‑to‑mouth follow these guidelines: contact can result in the ingestion of lead� Page 4 For technical questions, please call 1-888-866-5797. Item 69343... - Page 5 12� Do not heat up materials that can be damaged by high temperatures� 13� Maintain labels and nameplates on the tool� These carry important safety information� If unreadable or missing, contact Harbor Freight Tools for a replacement� Item 69343 For technical questions, please call 1-888-866-5797. Page 5...
- Page 6 State of California to cause but must be supplied by the operator� cancer and birth defects or other reproductive SaVe tHeSe inStructiOnS. Page 6 For technical questions, please call 1-888-866-5797. Item 69343...
- Page 7 Association, and the National Electrical Code� 2� Double insulated tools may be used in either Outlets for 2-prong plug of the 120 volt outlets shown in the preceding illustration� (See Outlets for 2-prong plug.) Item 69343 For technical questions, please call 1-888-866-5797. Page 7...
-
Page 8: Extension Cords
Volts Risk of Fire� Do not cover ventilation ducts� Keep flammable objects away� Alternating Current WARNING marking concerning Risk of Electric Shock� Properly connect power Amperes cord to appropriate outlet� Page 8 For technical questions, please call 1-888-866-5797. Item 69343... -
Page 9: Specifications
Parts List and Diagram on page 14� Functions Heat Level indicators power Button and Heat Level controls Heat (on end of unit) Guard Heating tube Handle Figure a Item 69343 For technical questions, please call 1-888-866-5797. Page 9... -
Page 10: Operation
3� Secure loose workpieces using a vise or clamps (not included) to prevent movement while working� Page 10 For technical questions, please call 1-888-866-5797. Item 69343... -
Page 11: General Operating Instructions
LeD Green LeD Lit during Lit during Lit during High temp. Low temp. cool Down Settings Settings Stage power Button Buttons to adjust Heat Settings up or Down Figure B Item 69343 For technical questions, please call 1-888-866-5797. Page 11... -
Page 12: Maintenance
• cracked or broken parts, qualified service technician. • damaged electrical wiring, and • any other condition that may affect its safe operation� Page 12 For technical questions, please call 1-888-866-5797. Item 69343... - Page 13 Unsatisfactory Inappropriate heat for task� Adjust heat setting or distance to results� workpiece to compensate� Follow all safety precautions whenever diagnosing or servicing the tool. Disconnect power supply before service. For technical questions, please call 1-888-866-5797. Item 69343 Page 13...
-
Page 14: Parts List And Diagram
If product has no serial number, record note: Some parts are listed and shown month and year of purchase instead� for illustration purposes only, and are not available individually as replacement parts� Page 14 For technical questions, please call 1-888-866-5797. Item 69343... - Page 15 Diagram For technical questions, please call 1-888-866-5797. Item 69343 Page 15...
-
Page 16: Warranty
OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO� Limited 90 Day Warranty Harbor Freight Tools Co� makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase�...