Page 1
PROFESSIONAL DOUBLE WINE CHILLER/WARMER PC200 Series For your safety and continued enjoyment of this product, always read the instruction book carefully before using.
Page 2
WINE CHILLER/WARMER Our Double Wine Chiller/Warmer has two separate internal databases of 33 red, white and Champagne wines. Simply select your wine from the backlit LCD screen and the chilling or warming begins. You’ll always know when your wine is ready because an alarm alerts you when it has reached the optimum serving temperature.
IMPORTANT SAFEGUARDS All the safety and operating instructions should be read, adhered to and followed before the unit is operated. WARNING 1. Close supervision is necessary when this unit is used by or near children. 2. Use this unit only for its intended use as described in this manual.
Page 4
DANGER To reduce the risk of electric shock, burns, fire or injury: 1. Always unplug the unit from the electrical outlet immediately after using. 2. Do not use while bathing or in a shower. 3. Do not place or store unit where it can fall or be pulled into a tub or sink.
Page 5
LOCATION OF CONTROLS AND INDICATORS Unit 1. On/Off 2. s 3. ▼ 4. Left Chilling/Warming Chamber Control 5. Right Chilling/Warming Chamber Control 6. Select 7. LCD Display – will display ENJOY at end of chilling/warming cycle 8. Ready Indicator Lights 9. Power Adapter 10. Plastic Sleeve...
Page 6
WINE CHILLER/WARMER OPERATION Using the Wine Chiller/Warmer 1. Insert one end of the power adapter into the Wine Chiller/Warmer (make sure adapter is securely in place) and plug the other end into an electrical outlet. 2. Insert wine or champagne bottle into the left or right side aluminum reservoir.
Two conditions remain: 1. The bottle is left in the unit over a period of time. The wine chiller/warmer will cycle to maintain the preset temperature, which means the current temperature will fluctuate slightly within 3 to 4 degrees. 2. If the bottle is removed from the wine chiller/warmer and then put back into it after a few minutes, it will automatically start chilling/warming to the preset temperature until the unit is turned off.