Samsung HG26NA470 Quick Setup Manual

Quick Setup Guide
To register this product please visit
STOP
www.samsung.com/register.
Please do not return
If you are having problems operating this TV,
US : 1-866-894-0524
CANADA : 1-800-726-7864
For web support please visit
http://www.samsung.com/us/business
List of Parts
1 2 3 4
5 6
Remote Control (AA59-00628A) & Power Cord
1 2
Batteries (AAA x 2)
Data Cable Hotel Mount Kit
3 4
(BN39-00865B, BN39-01011C : except
478/578 model)
• Owner's Instructions Security Screw x 4
5 6
• Safety Guide Bit tool (sold separately)
BN68-04292A-00
BN68-04292A
Connecting the TV with an SBB or STB
ETH MODEM
Data Cable
1. Connect the [DATA] jack of the TV to the [ETH MODEM] jack of the STB (SBB) with
the Data cable.
➣ Use data communication.
List of Vendors and Compatible Data Cables Supplied with the TV
♦ Refer to the code label on the data cables.
Note the
Confirm the code on the
labeled end.
Code Label
Note the
labeled end.
Vendor Cable code
OCC BN39-00865B
NXTV BN39-01011B
nStreams BN39-01110A
MTI BN39-01011C
[HG470570-QSG]BN68-04292A-ENG.indd 1
Installing the LED TV Stand
♦ HG26NA470 / HG26NA477 / HG32NA470 / HG32NA477 / HG32NA478 / HG40NA570 /
HG40NA577 / HG40NA578 / HG46NA570 / HG46NA577 / HG46NA578
Components
this unit
When installing the stand, use the provided components and parts.
Please call;
B
1 EA
A 1 EA
y Stand
y Guide Stand
(depending on the model)
1
2
C x4
(M4 X L12)
Top View
B
Front
A
✎
ATTENTION
Rear
✎
DO NOT USE DO NOT USE DO NOT USE
CHEMICALS GREASE OIL
(Correct assembly)
3 3
Side View
4
Hotel Plug & Play
Hotel Plug & Play function automatically performs the Hotel mode selection, Country Setup, Clock Setup, and Picture mode Setup runs once,
when power is first turned ON. Setup also runs automatically after you have executed a Service Reset.
[TV Rear Panel]
♦ UI Scenario
Setup > Plug & Play
Fastory Reset
Type
32P6AF0D Easy Set up
Local Set US
Basic Model HA477
• Interactive
SVC Model 477
• Standalone Plug & Play
Tuner SI_ATC2
Light Effect
OFF
• Standalone Only
Ch Table NONE
Front Color
NONE
If you select Standalone
Plug & Play
If you select the
Setup > Menu Language
Factory Reset, the
Select the language you want to use Select English
TV resets all values as the language
to their factory
• English
defaults and then
• Español
displays the Hotel
• Français
Plug & Play menu.
Go to the first Hotel
Plug & Play screen
above right labeled
Setup>Plug & Play.
Setup > Picture Mode
Select Picture Mode.
• Off
• On
Standalone Hotel
Option Menu
♦ Hotel Mount Kit
Long Bolt (2EA) Short Bolt (2EA)
Top
C
x8 (M4 X L12)
D
Bottom
x4 (M4 X L12, SECURITY)
y Screws
✎
Make sure to distinguish between the front and back of Stand and
Stand Guide when assembling them.
✎
Make sure that at least two people lift and move the LED TV.
✎
Lay the product down, with the screen facing down, and then fasten the screws.
♦
Assembling the swivel
Place a soft cloth over the table to The 32" and larger LED TVs have swivel stands. You can set these stands so
protect the TV, and then place the TV
that the TVs swivel 20 degrees left and right, 60 degrees left and right, or 90
on the cloth screen side down.
degrees left and right. The 26" LED TVs do not have swivel stands.
Insert the Stand Guide into the slot on
the bottom of the TV.
60"
(Incorrect assembly)
x4
C
(M4 X L12)
x4
D
(M4 X L12, SECURITY)
Leaving the BRACKET HOLDER SWIVEL
unchanged lets the TV swivel 20° left and right.
Rotating the BRACKET HOLDER SWIVEL 180°,
and then assembling the stand as shown above
lets the TV swivel 60° left and right.
If you select
Standalone Only
Standalone mode is set.
Next
If you select
Interactive Interactive
Hospital Option Menu
Setup > Auto Program (2/5)
Setup > Auto Program (1/5)
Set the search options for auto tuning.
Let's find and store channels on Select antenna
your TV. How do you receive cable means all
programming? the channels If you select Air c
available Previous
Cable
"I use an
• I use an antenna cable.. through your
Next
RF cable (air) Next
E antenna
• I use a set-top box.
will be stored.
(Auto Program Skip cable..."
necessary)
If you select "I use a
set-top box."
Setup > Clock (2/3)
Setup > Clock (3/3) What time zone are you in?
Add Daylight Savings Time? Switch are DST • Newfoundland
function off.
• Atlantic Select Eastern if
you are located in
• Off
Previous • Eastern
that region.
Previous
• Central
• On Next
E E
Next
• Mountain
Skip
E
Setup > Clock (1/3)
Set the Clock Mode. Set the
current time
automatically
Press Power • Auto using the time
from the digital
• Manual broadcast.
OFF to exit.
Viewing the Connection Panel
Bolt + Nut
[TV Rear Panel]
1
Nut (2EA) Washer (2EA)
2
3
4
Affixing the stand to a flat surface
such as a dresser top, desk top, or
Power
5
entertainment center.
Input
6
➣ The product color and shape may vary depending on the model.
1 COMPONENT IN / AV IN1 (46" Model: COMPONENT IN / AV IN)
2 DATA
3 HDMI IN 1 (DVI), 2, 3 / PC/DVI AUDIO IN
4 DIGITAL AUDIO OUT (OPTICAL)
5 PC / DVI AUDIO IN
6 PC IN
90"
7 AUDIO OUT
8 ANT IN
9 EX-LINK
0 USB / CLONING
! VIDEO / R-AUDIO-L
Removing the BRACKET HOLDER SWIVEL and Notice
When in the Hotel mode (Interactive or Standalone), the Channel menu items in
assembling the stand as shown above without the
the Menu OSD, except for Channel List, are deactivated. If you need to change the
BRACKET HOLDER SWIVEL lets the TV swivel
channel line up, use the Channel Setup item in the Hotel option menu.
90° left and right.
Hotel Plug & Play is not supported in B-LAN models (HG478/578).
♦ Hotel Plug & Play OSD
- Initial Highlight: Interactive
- If you select the Standalone Only button, the Standalone hotel mode is set by default
and the "Standalone mode is set" OSD appears for 3 seconds.
- TV enters into RF mode automatically after displaying "Standalone mode is set" OSD for
After 3
3 seconds.
seconds
TV will enter the RF
- If you select the Interactive mode, the Interactive Setup Menu is displayed. Press the
mode.
power off key to exit from the Interactive menu.
- If you select the Standalone Plug & Play mode, the "Select Menu Language" OSD
Press Power OFF
appears.
to exit.
♦ Select Menu Language OSD
- If you select Standalone from the "Select Hotel TV Mode" OSD, the "Select Menu
Language" OSD appears.
Setup > Auto Program (3/5)
- Initial Highlight : English
Set the parameters for cable auto
- Display time: OSD timeout and operation are the same as Samsung's consumer TV
program.
Select the digital models.
• Digital Cable System STD
Previous Previous
cable system
- If you press the Enter key, the "Select Country" OSD appears.
Next • Analog Cable System STD Next
E
Skip Skip
♦ Clock Mode OSD
- Initial Highlight: Auto.
- Display time: 30 seconds.
E
- The Clock Set item OSD appears if you select Manual.
Setup > Auto Program (4/5) - If you press the Enter key after setting the clock, or while in Auto clock set, the Picture
Mode OSD appears.
Auto Program is finding channels
for you ...
Cable 64 ♦ Set daylight saving time OSD
Previous
Next DTV Air 0 Stop - Initial Highlight: Off
Air 0
Skip
DTV Cable 0
- If you press the Enter key, the Select the DST area OSD appears.
Cable 0
♦ Picture Mode OSD
- Initial Highlight: Dynamic.
E
- The TV displays the Picture Mode OSD where you can choose the Dynamic or a
Setup > Auto Program (5/5) Standard Picture mode.
- After you select the picture mode, the TV displays the Standalone Setup Menu OSD.
Auto Program is complete
110 channels are memorized. Press power off to exit.
Previous
DTV Air 40
♦ Auto Search Mode OSD
Air 30
Next OK
E DTV Cable 20
Skip Cable 10
- If you select the Skip option, the TV displays the Clock Mode OSD.
- If you press the Enter key, the TV auto searches for channels.
- The OSD Display time, which starts at the time that Auto Store is completed goes to the
time Auto Sort starts, is 30 seconds.
9
[46" Model]
3 3
0 0
!
7 8
2012-04-17 8:34:20