Co/Pbx Dialing Options - NEC Univerge DT310 User Manual

Department Step Call
To make a Step Call:
1.
Place a call to a busy Department Group member.
-OR-
Place a call to a Department Group pilot number.
2.
Dial Department Step Code (808) to call the next
available Department Group member.
3.
Repeat step 2 to call other Department Group
members.
Voice Over
To initiate a Voice Over to a busy extension:
1.
Press the Voice Over key (Service Code 851:48).
-OR-
Dial 809.
Note: You hear an alert tone and the Voice Over key
flashes. You can talk to the called party after
the alert tone ends.
To respond to a Voice Over alert tone to your extension:
Note: You can only respond if you have a Voice Over
key.
1.
Press the Voice Over key (Service Code 851:48).
The Voice Over key lights steadily (green) and
Note:
you can talk to the interrupting party.
To return to your original call:
1. Press the Voice Over key.
Your Voice Over key flashes red when you are
Note 1:
talking to your original call.
Note 2: To switch between your original call and the
interrupting party, just keep pressing the Voice
Over key.

CO/PBX DIALING OPTIONS

Save Number Dialed
To save the outside number you just dialed (up to 24
digits).
Note: Use this feature before hanging up.
1.
Press the Save Number Dialed key (Service Code
851:30).
To redial a saved number:
1.
Press an idle trunk line key.
This selects a specific trunk for the call.
Note:
2. Press the Save Number Dialed key (Service Code
33