Terminal Setup; Terminal Setup With The Up/Down Key - NEC Univerge DT310 User Manual

2.
T
ERMINAL
This chapter describes operating procedures for
terminal settings by the UP/DOWN Key and Feature
Keys.
Various terminal settings such as display, sounds,
password, and language are also available from Menu
Key. For detailed information on terminal settings from
Menu Key, see IP Peripheral Equipment Guide.
Terminal Setup With the Up/Down
Key
To Adjust Handset Receiver Volume
Press the Up/Down key in the off-hook status or during
the call.
HANDSET
To Adjust Speaker Volume
Press the Up/Down key during speakerphone
operation or during the call.
SPEAKER
S
ETUP
To Adjust Ringer Tone
Press the Up/Down key during ringing.
To Adjust LCD Contrast
Press the Up/Down key in the on-hook status.
When the terminal is connected with 16LD
Note:
ADM, 16 degrees of LCD contrast are avail-
able (8 degrees in terminal side and 2 degrees
in ADM itself). (In Expansion mode only, Link
motion.)
18
RING
LCD