Authenticator Setup - Planet Networking & Communication 802.11g Wireless Broadband Router WRT-410 User Manual

802.11g wireless broadband router wrt-410
Table of Contents

Advertisement

4.3 Authenticator Setup

1. For EAP-MD5 Authentication, WEP key must be set previously. Go to Wireless>Authentication.
Enable WEP key, and enter a desired key string. You can skip this step if using EAP-TLS Authentication.
2. Click on 802.1X for detailed configuration.
3. Enable 802.1X Authentication by selecting "Enable".
4. If EAP-MD5 is used, you can leave the settings in Encryption Key Length and Lifetime as default. If
you are using EAP-TLS authentication, set the Encryption Key Length ranging from 64 to 256 Bits and
the Lifetime from 5 Minutes to 1 Day. As soon as the lifetime expires, the Encryption Key will be renewed
by RADIUS server.
5. Enter the IP address, Port number, and Shared Secret Key used by the Primary Radius Server.
- 46 -

Advertisement

Table of Contents
loading

Table of Contents