Page 2
The 535Q Wah pedal is based on the original CRY- BABY Wah Wah pedal, which has been a standard in the world of music since its introduction in the late 1960’s.
Setup Instructions: • Run a cord from your instrument to the 535Q’s instrument jack. Location of the instrument jack is printed on the rubber tread of the pedal. • Run another cord from your amplifier input to the 535Q’s ampli- fier jack.Turn on the amplifier.
Operating Instructions: WAH RANGE The Wah Range Selector knob is located on the side of the 535Q pedal. It allows you to select a tonal range that is best suited for your expres- sion needs. Turn the knob clockwise for the lower register ranges and counter-clock- wise for the higher ranges.
AC adapter. Plug polarity is positive on the barrel and negative in the center. NOTE: Battery must be installed to operate the 535Q unless an AC adapter is used. When using a battery, the life of the battery can be greatly extended if you unplug the...
Here are a dozen setups and wah settings that demonstrate the broad range of custom sounds you can create with the Crybaby 535Q Wah Wah pedal. Zappa Honking...
Page 7
Smooth Bob Marley Funkadelic Magot lead Wah use semi- Brain - Distortion clean amp setting before wah - Strat RANGE RANGE with Strat into Marshall The "On At All Times" Jimmy Page - Dazed Michael Shenker Mid and Confused Wah Range Wah setting Les Paul with RANGE...
Page 8
The Artist Formerly Super Crazy Lead Know As... - Funky Drive with Definition Love - Tele straight any guitar any amp RANGE RANGE into a board Tom Morello - Rage Shallow sweeping Against the Machine John Frusciante Strat w/humbucker Use Strat with RANGE RANGE into Marshall...