Maintenance Schedule - HUSTLER FasTrak Super 928192 Owner's Manual

Hustler Mini Z 36/42 & FasTrak Super Duty 36/42

Maintenance Schedule

Refer to Fig. 4-11
SERVICE AT
INTERVALS INDICATED
Verify safety start interlock system
Visually inspect unit for loose
hardware and/or damaged parts
Visually inspect tires
Check oil level, engine (1)
Clean air intake screen (4)
Check fuel level
Blades - sharpen & securely fastened
Discharge chute - securely in place &
in lowest position
Clean engine and transaxle
compartment
Replace air cleaner paper element (5)
Change transaxle oil & filter
Grease deck height pivots
Grease gauge wheel bearings
Change engine oil & filter (1) (3)
Clean cylinder and head fins (a)
Check battery connections
Check tire pressure with a gauge
Check hydraulic oil level
Clean engine exterior (a)
Clean and regap spark plugs (a)
Check pump and deck belt tension
& condition (5)
Check fuel and hydraulic lines (6)
Check fuel valve and grommet (6)
Tighten lug nuts on wheels (2)
Change fuel filter
Change hydraulic filter and oil (3)
Replace spark plugs
NOTES:
1. Initial oil change is after 5 hours of operation. Thereafter,
change oil after every 40 hours operation. Change more often
under dusty or dirty conditions and during hot weather periods.
2. Torque initially and after first 2 hours of operation.
3. Change engine oil filter per the engine manufacturer's
recommendations. Refer to Engine Owner's Manual for
recommendations and other maintenance items.
4. Service more often under dusty or dirty conditions. Use caution
when servicing to prevent dust contamination in the engine.
Do not clean filter element. Replace with a new one.
5. Pump drive belt only - Inspect every 100 hours and replace
if worn or cracking is noticed. Otherwise, replace every 400
hours or 2 years whichever comes first.
6. Check fuel line hoses, fuel valve and grommets for any cracks
or leaks
7. Initial system oil and filter change must be after the first 75
hours of use or 1 year whichever comes first. Thereafter,
replace filter and oil in each transaxle every 2 years or 200
hours, whichever comes first.
REFERENCES:
a — Refer to Engine Owner's Manual
NOTE: After completing maintenance cycle (500 hours), repeat cycle.
WEEKLY MONTHLY ANNUALLY OR
OR 50 OR 100 500
HOURS HOURS HOURS
Daily
Daily
Daily
Daily or every 4 hrs.
Daily or every 4 hrs.
Daily
Daily
Daily
Daily
As needed
Every 200 hours or 2 years
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
x
24
107708_0808