Figure 25 – Feeding Into The Peeler Mechanism; Figure 26 – Backing Exit Position - AMT Datasouth Fastmark 600 Series User Manual

5. Position the Media Backing out of the printer and over the Peel Bar.
Backing
Peeler Roller
Figure 25 – Feeding into the Peeler Mechanism
6. Push the Media Backing in the slot just under the Peel Bar and between the front cover.
Continue to push the stock until it comes out of the larger slot in the front cover.
7. If the Media Backing will not push through, then Press the Feed button one time.
Fastmark 600 Series User's Guide
Label
Figure 26 – Backing Exit Position
Media Stock from Media Roll
Peeler Bar
Platen Roller
29