Installation And Configuration; Finding A Location For The Printer - AMT Datasouth Fastmark 600 Series User Manual

INSTALLATION AND CONFIGURATION

Finding a Location for the Printer

Determine a suitable location for the printer and power supply brick with the following
requirements:
Find a flat stable surface with sufficient clearance to allow for interface cables and media
loading.
The location should be near the host or terminal. Consider the distance between the host
and printer for the communication cable (serial or parallel cable).
The location should be free from excessive direct sunlight, temperature, humidity, dust,
dirt, and debris.
The location should be near a grounded AC power receptacle wired in compliance with
local ordinances.
Fastmark 600 Series User's Guide 15