1. Manuals
  2. Brands
  3. Husqvarna Manuals
  4. Snow Blower
  5. 1130SB-XLSB
  6. Owner's manual

Husqvarna 1130SB-XLSB Owner's Manual

Husqvarna snow blower user manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
1130SB-XLSb
Owner's Manual / 96193004000 / 2008-12

Advertisement

Table of Contents
loading

Related Manuals for Husqvarna 1130SB-XLSB

Summary of Contents for Husqvarna 1130SB-XLSB

  • Page 1 1130SB-XLSb Owner's Manual / 96193004000 / 2008-12...

  • Page 2: Safety Rules

    Safe Operation Practices for Walk-Behind Snow Throwers This snow thrower is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury. Look for this symbol to point out im- por tant safety precautions.

  • Page 3: Table Of Contents

    6. When cleaning, repairing or inspecting the snow thrower, stop the engine and make certain the collector/impel- ler and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the plug to prevent someone from accidentally starting the engine.
  • Page 4 PARTS PACKED SEPARATELY IN CARTON (1) MULTI- (1) FUEL STABILIZER PACKET WRENCH (180684) (1) POWER CORD (1) SAFTEY IGNITION KEY (193071) (198563) (1) AUGER CONTROL ROD (1) TRACTION DRIVE CONTROL ROD (1) DISCHARGE CHUTE EXTRA SHEAR BOLTS AND NUTS (6) SHEAR BOLTS 1/4-20 x 1-3/4 (6) SPACERS (6) LOCKNUTS (198636)

  • Page 5: Assembly / Pre-Operation

    ASSEMBLY / PRE-OPERATION Read these instructions and this manual in its entirety before you attempt to assemble or operate your new snow thrower. Reading the entire manual will familiarize you with the unit, which will assist you in assembly, operation and maintenance of the product. Your new snow thrower has been as sem bled at the factory with the ex cep tion of those parts left unassembled for shipping purposes.
  • Page 6 ASSEMBLY / PRE-OPERATION INSTALL TRACTION DRIVE CONTROL ROD (See Figs. 3 and 4) The traction drive control rod has the long loop on the end of the spring as shown. 1. Slide rubber sleeve up rod and hook end of spring into eye of cable with loop opening down as shown.
  • Page 7 ASSEMBLY / PRE-OPERATION INSTALL DISCHARGE CHUTE / CHUTE ROTATOR HEAD (See Fig. 7) NOTE: The multi-wrench provided in your parts bag may be used to install the chute rotator head. 1. Place discharge chute assembly on top of chute base with discharge opening toward front of snow thrower.

  • Page 8: Operation

    OPERATION KNOW YOUR SNOW THROWER READ THIS OWNER'S MANUAL AND ALL SAFETY RULES BEFORE OPERATING YOUR SNOW THROWER. Compare the illustrations with your snow thrower to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. These symbols may appear on your snow thrower or in literature supplied with the product.
  • Page 9 GAS O LINE FILLER CAP MUF FLER CHOKE CON- TROL PRIM ER SAFETY IGNITION FUEL SHUT-OFF VALVE THROTTLE / ENGINE CONTROL NOTE: ITEMS ABOVE ARE SHOWN IN THEIR TYPICAL LOCATION ON THE ENGINE. ACTUAL LOCATION MAY VARY WITH THE ENGINE ON YOUR UNIT.
  • Page 10 The operation of any snow thrower can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your snow thrower or performing any ad just- ments or repairs. We recommend standard safe ty glasses or a wide vision safety mask worn over spectacles.
  • Page 11 AUGER CONTROL LEVER Fig. 15 USING THE CLEAN-OUT TOOL (See Fig. 16) In certain snow conditions, the discharge chute may be- come clogged with ice and snow. Use the clean-out tool to dislodge this blockage. When cleaning, repairing, or in spect ing, make certain all controls are disengaged and the au- ger/impeller and all moving parts have stopped.

  • Page 12: Before Starting The Engine

    NOTE: It is not recommended to operate the snow thrower over gravel or rocky surfaces. Objects such as gravel, rocks or other debris, can easily be picked up and thrown by the impeller, which can cause serious personal injury, property dam age or damage to the snow thrower.

  • Page 13: Snow Throwing Tips

    CAUTION: Alcohol blended fuels (called gas- o hol or using ethanol or methanol) can attract moisture which leads to separation and for- ma tion of acids dur ing storage. Acidic gas can damage the fuel system of an engine while in storage.

  • Page 14: Maintenance Schedule

    WARNING: Do not operate snow thrower if weather conditions im pair visibility. Throwing snow dur ing a heavy, windy snowstorm can blind you and be hazardous to the safe operation of the snow thrower. GENERAL REC OM MEN DA TIONS The warranty on this snow thrower does not cover items that have been sub ject ed to operator abuse or negligence.
  • Page 15 SNOW THROWER Always observe safety rules when performing main te nance. TIRES • Maintain proper air pressure in both tires (14–17 P .S.I. / 19-24.5 N-m). • Keep tires free of gasoline / oil, which can harm rubber. NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer.

  • Page 16: Service And Adjustments

    SERVICE AND ADJUSTMENTS WARNING: To avoid serious injury, before per- forming any service or ad just ments: 1. Be sure throttle is in STOP position. 2. Remove safety ignition key. 3. Make sure the augers and all mov ing parts have completely stopped. 4.

  • Page 17: To Replace Belts

    SERVICE AND ADJUSTMENTS TO REPLACE BELTS (See Fig. 25) The auger and traction drive belts are not adjustable. If the belts are damaged or begin to slip from wear, they should be replaced. It is recommended that the belt(s) be replaced by a qualified service center.

  • Page 18: Storage

    TO REMOVE WHEELS (See Fig. 26) • Remove the klik pin and remove wheel from axle. IMPORTANT: When installing wheel, be sure to use the axle hole closest to the end of the shaft – do not use the hole in the wheel hub (if equipped). Inner hole in axle and hole in wheel hub are not used for your model snow thrower.

  • Page 19: Troubleshooting

    TROUBLESHOOTING See appropriate section in manual unless directed to a qualified service center. PROBLEM CAUSE Does not start 1. Fuel shut-off valve (if so equipped) in OFF position. 2. Safety ignition key is not inserted. 3. Out of fuel. 4. Throttle in STOP position. 5.

  • Page 20: Repair Parts

    REPAIR PARTS SNOW THROWER - MODEL NO. 1130SB-XLSb (96193004000), PRODUCT NO. 961 93 00-40 AUGER HOUSING / IMPELLER ASSEMBLY 2 (EXPLODED) 01.07.004-B...

  • Page 21: Warranty

    REPAIR PARTS SNOW THROWER - MODEL NO. 1130SB-XLSb (96193004000), PRODUCT NO. 961 93 00-40 NOTE: All component dimensions given in U.S. inches. IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your snow thrower and void your warranty.
  • Page 22 REPAIR PARTS SNOW THROWER - MODEL NO. 1130SB-XLSb (96193004000), PRODUCT NO. 961 93 00-40 01.07.023-B 01.07.016-A NOTE: All component dimensions given in U.S. inches. IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your snow thrower and void your warranty.
  • Page 23 REPAIR PARTS SNOW THROWER - MODEL NO. 1130SB-XLSb (96193004000), PRODUCT NO. 961 93 00-40 01.07.007-A NOTE: All component dimensions given in U.S. inches. IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your snow thrower and void your warranty.
  • Page 24 REPAIR PARTS SNOW THROWER - MODEL NO. 1130SB-XLSb (96193004000), PRODUCT NO. 961 93 00-40 01.17.003-B NOTE: All component dimensions given in U.S. inches. IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your snow thrower and void your warranty.
  • Page 25 REPAIR PARTS SNOW THROWER - MODEL NO. 1130SB-XLSb (96193004000), PRODUCT NO. 961 93 00-40 PART DESCRIPTION 532 42 17-14 CHUTE WELDMENT 532 18 41-13 DEFLECTOR WELDMENT 532 42 11-63 DEFLECTOR CONTROL ASSEMBLY 532 42 03-25 DEFLECTOR SEAL 532 41 42-80...
  • Page 26 REPAIR PARTS SNOW THROWER - MODEL NO. 1130SB-XLSb (96193004000), PRODUCT NO. 961 93 00-40 PART DESCRIPTION 532 42 11-60 LEVER/CABLE ROTATOR ASSEMBLY GRAY 817 50 10-10 SCREW 10−24 X .625 532 42 06-78 ROTATOR HEAD 532 42 11-61 ROTATOR PIVOT BRACKET...
  • Page 27 REPAIR PARTS SNOW THROWER - MODEL NO. 1130SB-XLSb (96193004000), PRODUCT NO. 961 93 00-40 NOTE: All component dimensions given in U.S. inches. IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your snow thrower and void your warranty.
  • Page 28 REPAIR PARTS SNOW THROWER - MODEL NO. 1130SB-XLSb (96193004000), PRODUCT NO. 961 93 00-40 NOTE: All component dimensions given in U.S. inches. IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your snow thrower and void your warranty.
  • Page 29 REPAIR PARTS SNOW THROWER - MODEL NO. 1130SB-XLSb (96193004000), PRODUCT NO. 961 93 00-40 NOTE: All component dimensions given in U.S. inches. IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your snow thrower and void your warranty.
  • Page 30 REPAIR PARTS SNOW THROWER - MODEL NO. 1130SB-XLSb (96193004000), PRODUCT NO. 961 93 00-40 NOTE: All component dimensions given in U.S. inches. IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your snow thrower and void your warranty.
  • Page 31 REPAIR PARTS SNOW THROWER - MODEL NO. 1130SB-XLSb (96193004000), PRODUCT NO. 961 93 00-40 01.03.003-A NOTE: All component dimensions given in U.S. inches. IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your snow thrower and void your warranty.
  • Page 32 REPAIR PARTS SNOW THROWER - MODEL NO. 1130SB-XLSb (96193004000), PRODUCT NO. 961 93 00-40 01.02.002-F DRIVE...
  • Page 33 REPAIR PARTS SNOW THROWER - MODEL NO. 1130SB-XLSb (96193004000), PRODUCT NO. 961 93 00-40 PART DESCRIPTION 532 19 20-02 SHIFT BRACKET 817 50 10-10 SCREW 10−24 X .625 874 76 05-52 SCREW 5/16−18 X 3.25 532 17 92-46 PLASTIC WASHER...
  • Page 34 REPAIR PARTS SNOW THROWER - MODEL NO. 1130SB-XLSb (96193004000), PRODUCT NO. 961 93 00-40 01.01.001-B NOTE: All component dimensions given in U.S. inches. IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your snow thrower and void your warranty.
  • Page 35 REPAIR PARTS SNOW THROWER - MODEL NO. 1130SB-XLSb (96193004000), PRODUCT NO. 961 93 00-40 01.04.002-B NOTE: All component dimensions given in U.S. inches. IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your snow thrower and void your warranty.
  • Page 36 REPAIR PARTS SNOW THROWER - MODEL NO. 1130SB-XLSb (96193004000), PRODUCT NO. 961 93 00-40 01.15.002-A NOTE: All component dimensions given in U.S. inches. IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your snow thrower and void your warranty.
  • Page 37 REPAIR PARTS SNOW THROWER - MODEL NO. 1130SB-XLSb (96193004000), PRODUCT NO. 961 93 00-40 01.15.001-A NOTE: All component dimensions given in U.S. inches. IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your snow thrower and void your warranty.
  • Page 38 REPAIR PARTS SNOW THROWER - MODEL NO. 1130SB-XLSb (96193004000), PRODUCT NO. 961 93 00-40 01.14.003-A 01.14.007-A NOTE: All component dimensions given in U.S. inches. IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your snow thrower and void your warranty.
  • Page 39 REPAIR PARTS SNOW THROWER - MODEL NO. 1130SB-XLSb (96193004000), PRODUCT NO. 961 93 00-40 NOTE: All component dimensions given in U.S. inches. IMPORTANT: Use only Original Equipment Manufacturer (O.E.M.) replacement parts. Failure to do so could be hazardous, damage your snow thrower and void your warranty.
  • Page 40 532 42 35-05 12.12.08 SR Printed in U.S.A.

This manual is also suitable for:

96193004000

Table of Contents