Advertisement
Available languages
Available languages
How to Charge the Battery (R 43SE)
N1 - Wiring Loom
N2 - Charging Point
N3 - Cap
1. Stop your lawnmower.
2. Disconnect the spark plug.
3. Remove the cap from the charging point at the
bottom of the wiring loom.(N)
4. Plug charger lead into connection on battery
loom.(N)
5. Plug the battery charger into a domestic electric
socket.
6. Charging will then commence.
7. Charge for 24 hours.
8. After charging, disconnect the charger from the
socket and charging point.(N)
9. Replace the cap on the charging point.(N)
10. The unit is now ready for use.
ENVIRONMENTAL INFORMATION
Husqvarna Outdoor Products are manufactured
under an Environmental Management System (ISO
14001) using, where practical, components
manufactured in the most environmentally
responsible manner, according to company
procedures, and with the potential for recycling at
the end of the products' life.
•
Packaging is recyclable and plastic components
have been labelled (where practical) for
categorised recycling.
•
Awareness of the environment must be
considered when disposing of 'end-of-life'
product.
•
If necessary, contact your local authority for
disposal information.
BATTERY DISPOSAL
•
The battery should be taken to an Approved
Service Centre or your local Recycling Station.
•
Do NOT dispose of used battery with
household waste
•
Lead/Acid batteries can be harmful and
should be disposed of through the
recognised recycling facility in accordance
with European Regulation
•
Do NOT dispose of battery to water.
•
Do NOT incinerate
DISPOSAL OF FUELS AND LUBRICATING OILS
•
Wear protective clothing when handling any
fuels and lubricants.
•
Avoid contact with skin.
•
Remove petrol and engine oil before transporting
the product.
•
Contact your local authority for information of
your nearest Recycling/Disposal Station.
•
Do NOT dispose of used fuels/oils with
household waste
•
Waste fuels/oils are harmful, but can be
recycled and should be disposed of through
the recognised facilities.
•
Do NOT dispose of used fuels/oils to water.
•
Do NOT incinerate
ENGLISH - 5
Maintenance
Battery Replacement
1. The battery is located underneath a cover
behind the engine.
2. Stop the lawnmower and disconnect the spark
plug.
3. Remove the screws from the cover.
4. Remove cover to gain access to the battery.
IMPORTANT:-Replacement batteries will need
to be charged before use.
Ensure that neither the charger nor the battery
are exposed to moisture
The battery pack can be replaced by unclipping
the battery from its housing and disconnecting
the battery pack from the battery leads.
General Guidance on Rechargeable Battery
1. Charging time is 24 hours.
2. Under normal usage the battery will be charged
during the running of the engine.
3. To keep in prime condition the battery should be
charged at least once every six months.
4. Exceeding the charging period may shorten the
battery life.
5. Protect electric cable. Never carry the battery
charger by the electric cable only.
6. If after an extended usage period the battery
quickly runs down after a full 24 hour charging
period, a replacement battery is probably
needed.
7. Do not attempt to open the main body casing.
8. Clean only with a dry soft cloth.
9. Never use a damp cloth or flammable liquids
such as petrol, white spirits, thinners etc.
10. Dispose of old batteries safely.
The engine brake cable should always be
adjusted to stop the engine within 3 sec.
CAUTION! For adjustment contact your
authorized service dealer.
At the End of the Mowing Season
1. Replace blade, bolts, nuts or screws, if
necessary.
2. Clean your lawnmower thoroughly.
3. Ask your local Service Centre to clean the air
filter thoroughly and carry out any service or
repairs required.
4. Drain engine of oil and petrol.
Storing your Lawnmower
1. Do not store your lawnmower immediately after
use.
2. Wait until the engine has cooled to avoid a
potential fire hazard.
3. Clean your lawnmower
4. Store in a cool, dry place where your lawnmower
is protected from damage.
Advertisement
