Other Features; Shortcut To Turn Ringer On/Off; Conformance To Regulation; Programming - Amytel AT3100 Owner's Manual

Flash timing could not be adjusted after the ringer melody or volume is
adjusted. You need to exit and reenter into the Programming mode.

OTHER FEATURES

Shortcut to Turn Ringer On/Off

You can turn on/off the ringer by pressing
and holding in Standby. will turn on
when the ringer is turned off.
When the ringer is turned on using this
shortcut method, the ringer volume will be
set to medium.
This setting affects both the incoming call ringing and base paging.
Paging the Handset
You can page or locate the handset by
pressing on the base. The handset
will produce the paging tone (same as
ringer melody) for 30 seconds and LCD
display is as shown here.
You could stop the paging by pressing any key on the handset.
This feature is affected by the ringer melody, ringer volume and ringer on/off
that you' ve programmed.
Out of Range
You will be alerted when the handset is too
far away from the base. will turn on.
Bring the handset nearer the base to move
it back in range.
If you are talking on the phone, you' ll hear
an alert tone through the earpiece. If you fail to bring the handset back in
range with the base, your call would be disconnected.
12
NOTE:
Telephone Functionality
Although this telephone can be used in the whole European Community, it
has been designed to operate with the [country name(s)] analogue network
and some features may not operate as expected when connected outside
[country name(s)].

CONFORMANCE TO REGULATION

This product complies with the essential requirements for Radio and
Telecommunications Terminal Equipment.
For enquiries, contact ...
13