Download
Share
Print this page
Toshiba TOSVERT VF-S11 Specifications
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Inverter
  5. TOSVERT VF-S11
  6. Specifications
Toshiba TOSVERT VF-S11 Specifications

Toshiba TOSVERT VF-S11 Specifications

Transistor inverter
Hide thumbs Also See for TOSVERT VF-S11:

Advertisement

Quick Links

Download this manual See also: Function Manual, Instruction Manual
Enlarged version
To users of our inverters :
Our inverters are designed to control the speeds of three-phase induction motors for general industry.
* Read the instruction manual before installing or operating the inverter unit and store it in a safe place for reference.
* When using our inverters for equipment such as nuclear power control, aviation and space flight control, traffic, and safety, and there
is a risk that any failure or malfunction of the inverter could directly endanger human life or cause injury, please contact our
headquarters, branch, or office printed on the front and back covers of this catalogue. Special precautions must be taken and such
applications must be studied carefully.
* When using our inverters for critical equipment, even though the inverters are manufactured under strict quality control always fit
your equipment with safety devices to prevent serious accident or loss should the inverter fail (such as issuing an inverter failure
signal).
* Do not use our inverters for any load other than three-phase induction motors.
* None of Toshiba, its subsidiaries, affiliates or agents, shall be liable for any physical damages, including, without limitation,
malfunction, anomaly, breakdown or any other problem that may occur to any apparatus in which the Toshiba inverter is incorporated
or to any equipment that is used in combination with the Toshiba inverter. Nor shall Toshiba, its subsidiaries, affiliates or agents be
liable for any compensatory damages resulting from such utilization, including compensation for special, indirect, incidental,
consequential, punitive or exemplary damages, or for loss of profit, income or data, even if the user has been advised or apprised of
the likelihood of the occurrence of such loss or damages.
For further information, please contact your nearest Toshiba Representative or International Operations-Producer Goods.
The information in this brochure is subject to change without notice.
AB
Precautions
Built-in EMI noise filter
Introducing the world's top class compact inverter
Transistor Inverter
New Global Standard Inverter TOSVERT
TM

Advertisement

loading

Related Manuals for Toshiba TOSVERT VF-S11

Summary of Contents for Toshiba TOSVERT VF-S11

  • Page 1 Toshiba inverter is incorporated or to any equipment that is used in combination with the Toshiba inverter. Nor shall Toshiba, its subsidiaries, affiliates or agents be...

  • Page 2: Table Of Contents

    The VF-S11 incorporates a noise lineup of totally enclosed box types that can be used in severe designed to have a life of 10 years*. In addition, the VF-S11 can filter in its compact body to installation environments subject to lots of water and dust.

  • Page 3: Applicable Specification By Each Segment

    Built-in noise filter: A noise filter is built into all models. Output frequency: The VF-S11 can be used in a wide range of General Noise filter...

  • Page 4: Standard Specifications

    Note 7. Built-in standard filter: Core and capacities With RFI noise filter option: Complies EN55011 Class A Group 1(Max.5m*) and Class B Group 1(Max.1m*) (Shipment setting) Input voltage VF-S11 Series 004: 0.4kW None: No filter None: Standard type * Length of motor connecting cable.

  • Page 5: Terminal Functions

    600V class: three-phase 525~600V-50/60Hz Control circuit Foward circuit Reverse Connect to a (three-phase induction) motor. U/T1, V/T2, W/T3 Reverse VF-S11 VF-S11 Reset Fault detection relay Reset Fault detection relay Operation Connect to braking resistors. Change parameters if necessary. PA/+, PB...

  • Page 6: External Dimensions

    External dimensions List of parameters What are parameters? Each “setting item” that determines the control (operation) of an inverter is called a parameter. For example, the connection meter selection parameter (title ) is adjusted to set the connection meter, the acceleration time parameter (title ) is adjusted to change the acceleration time, and the maximum frequency parameter (title...
  • Page 7 Extended parameters 1 Extended parameters 2 2005 Ver.112/113 2005 Ver.112/113 Parameters for setting functions that cannot be fulfilled by basic parameters. Parameters for setting higher functions. DC Braking parameters Communications functions parameters Input terminal functions assignment parameters Carrier frequency parameters A variety of functions can be given to various compatible input terminals by assigning the function numbers Set parameters related to deep carrier frequency motor noise.

  • Page 8: For Inverter Users

    (2) Install ground-fault relays with a high-frequency protective function (e.g., Do not install a power factor improvement capacitors on the input or output side of Toshiba CCR12 type of relays) in both the same and other lines. When ELCBs the inverter.

  • Page 9: Peripheral Devices

    DC reactor. (DCL) P .19 When constant-torque operation must be performed at low speeds, use a Toshiba VF depending on cable length and wiring method, or use of a 400V class motor (for 500V class only) driven with an inverter.
  • Page 10 3-phase 500V -25A-50/60Hz VFS11-4055 4110PL Zero-phase reactor Harmonica ferrite core-type PFL4050S 3-phase 500V -50A-50/60Hz VFS11-4150PL terminal M6 VF-S11 Note: PFLS2002S has 4 terminals. radio noise filter 7 x 14 slotted hole Power source Motor DC reactor Terminal box with cover...
  • Page 11 A and B, refer to table below. Select an earth leakage breaker with consideration of leakage current above and leakage current from the inverter unit. Remote panel Panel hole VF-S11 R2.5 (Installation meter) Power source A Power source B...

  • Page 12: Totally Enclosed Box Type

    Note 4: ±10% when the inverter is operated continuously (under a load of 100%). Minimum wiring ● Note 5: The factory default settings of the following parameters are different from those of the standard type. VF-S11 VF-S11 3-phase 500V IP54 IP00 The factory default settings of all other parameters are the same as those of the standard type.