Changing Paper Size - Panasonic DP-130 Operating Instructions Manual

Changing Paper Size

The paper tray is designed to accommodate invoice, letter and legal size
paper.
INVOICE
129%
100%
PHOTO
AUTO 79% LEGAL
65% LETTER
DARKER 61% LEGAL
LIGHTER
(1) Continue to press the Paper Tray Key until the light
for the desired tray to be changed is illuminated.
(2) Press and hold Paper Tray key, then continue to
repeatedly press "1" key to scroll until the number in
the display matches the paper size required.
Use the chart on the right.
3
Paper Guide a a a a a
4
Stopper
Please change the paper size of 2nd Paper Feed Module by same procedure.
C
ATTENTION
∗
1 When the optional 2nd Paper Feed Module is not installed, set to "TRAY 2, to
zero (0) not installed".
∗
2 "TRAY 2 0: NOT INSTALLED" is available to select only when optional 2nd
Paper Feed Module is selected at the procedure 1.
ON LINE
LETTER
LETTER
INVOICE
ZOOM
INVOICE
(50~200%)
Paper Tray Key
Paper Guide b b b b b
2
Changing the Paper Size
(See table below)
ENERGY
SAVER
10 1
"1" Key
1
# Lift paper tray and pull out of
the copier until it stops.
$ Move the paper guide a to the
paper length required.
# Move the paper guide b to the
paper width required.
Squeeze the stopper to move the
paper guide b to the desired paper
size.
$ Push paper tray back into
copier.
Handling
CLEAR/STOP
START
1: Letter
[
2: Legal
[
3: Invoice
[
4: A4
[
5: B5
[
6: A5
[
7: FLS1
[
* 2
0: NOT INSTALLED
25