Programming; Personal Program Schedule; Reviewing Programs - Hunter Set & Save 47110A Owner's Manual

®
Setting Day and Time
(Continued)
STEP 3:
Press again to change from minute set-
day/time
ting to day setting. The current day will
be flashing.
Press to change the Day up or down to the
current day.
STEP 4:
Press again to change back to the
day/time
normal display.
or
hold
/return
hold
NOTE: You may press at any time during Day and Time setting to return
/return
to the normal display.
12 Hr. / 24 Hr. Time Format
Your thermostat is set from the factory in normal 12 (AM / PM) time format. To change to 24
hour (military) time, press program at any time while the Hour, Minute, or Day is flashing
to toggle between the 12 hour and 24 hour formats. The AM / PM indicator will not be dis-
played in 24 hour mode. Both the current time and all programs will automatically change to
the selected format.

PROGRAMMING

The following time and temperature settings are pre-programmed into the thermostat:
Program Number Time
1 6:00 am
2 8:00 am
3 4:00 pm
4 10:00 pm
All 7 days of the week have the same default programs.

Personal Program Schedule

You can revise the factory programs to match your own schedule. Use this Personal Pro-
gram Schedule to determine which times and temperature settings match your comfort and
energy saving requirements. Use a pencil so you can revise your records each time you
change your program settings.
Heating
Day Program 1 Program 2
Monday – Time Time
Friday Temp Temp
Saturday – Time Time
Sunday Temp Temp
Cooling
Day Program 1 Program 2
Monday – Time Time
Friday Temp Temp
Saturday – Time Time
Sunday Temp Temp
M
PM
SA
PM
2
TEMP
Temperature in C˚ (F˚)
Heat Cool
20˚C (68˚F) 26˚C (78˚F)
16˚C (60˚F) 29˚C (85˚F)
20˚C (68˚F) 26˚C (78˚F)
16˚C (60˚F) 28˚C (82˚F)
Program 3 Program 4
Time Time
Temp Temp
Time Time
Temp Temp
Program 3 Program 4
Time Time
Temp Temp
Time Time
Temp Temp
Revising Programs
Familiarize yourself with manually changing programs, so that you can easily modify the
programs as your comfort needs change. Follow the steps below to change the program times
and temperatures.
NOTE: 1) The program time can be set in 10-minute increments.
2) The program temperature can be set in increments of 1˚C (1˚F).
3) After 15 seconds without a key press, the thermostat will return
to normal display mode.
4) When setting the program time, note the AM / PM indicator.
STEP 1:
Slide the System Switch to the HEAT or
system
heat COOL position to program the correspond-
off
ing system.
cool
NOTE: If the System Switch is in the
OFF position, the last position used
will be programmed.
STEP 2:
Press to enter program mode. HEAT or
program
COOL will be displayed on the LCD.
STEP 3:
The Program hour and AM or PM indicator
are flashing. Press to change the hour.
STEP 4:
Press again to change to the minute posi-
program
tion. The current minute will be flashing.
Press to change the minute.
STEP 5:
Press again to change to the program tem-
program
perature. The current temperature will be
flashing.
Press to change the temperature.
STEP 6:
Press again to move to the next program
program
number.
Repeat Steps 3 through 5 to change the
remaining Weekday and Weekend programs.
(There are a total of 8 programs.)
After cycling through all 8 programs, press
program
again to return the display to normal.
Press at any time to exit the Program
hold
Mode.
/return

Reviewing Programs

To review your program settings, press program repeatedly to cycle through the programs.
You can also make changes at any time.
5
SA
PM
2
TEMP
M T W TH F
AM
1
HEAT
M T W TH F
AM
1
HEAT
TH
M T W F
AM
1
HEAT