Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Climate Technology 43154
Summary of Contents for Climate Technology 43154
-
Page 1: Programmable Thermostat
PROGRAMMABLE THERMOSTAT Owners Manual Model 43154... -
Page 2: Features
Congratulations! Your new Climate Technology thermostat will provide years of reliable service. By saving energy, your thermostat will pay for itself during its first season of use. Thank you for buying a Climate Technology product! Please read this manual for complete instructions on installing and operating your thermo- stat. -
Page 3: Mount Wallplate And Thermostat
If hole in wall is larger than necessary for wires, seal this hole with insulating material so that no hot or cold air can enter the back of the thermostat from the wall. This air could cause a false thermostat reading. -
Page 4: Wiring Diagrams
Fan come on as expected after installation. If the Fan operation is normal, leave it in the “HG” position. If the Fan does not come on within a minute of the thermostat calling for heat, change the switch position to “HE”. The system selector has no effect in the cooling mode. -
Page 5: Setting Day/Time, 12/24 Hr Format
12 Hr. / 24 Hr. Time Format Your thermostat is set from the factory in normal 12 (AM / PM) time format. To change to 24 hour (military) time, press program at any time while the Hour, Minute, or Day is flashing to toggle between the 12 hour and 24 hour formats. -
Page 6: Reviewing Programs
SPAN Setting Mode auto Your thermostat is set at the factory to cycle at 1˚F (0.5˚C) above and below the set temperature. (Span = 2) This setting has been designed to provide a comfortable room temperature under most all conditions. However, if you find your system cycling too fast or too slow, then the Span can be adjusted to modify the cycle time. -
Page 7: Mechanical Heat Back-Up
Auto Cut-Off will have no effect. Mechanical Heat Back-Up This thermostat includes a bi-metal switch that will automatically turn on the Heat when the temperature reaches about 41 F (5 C). WARNING: This switch only activates the Heating terminal (W). The sys- tem itself must be capable of automatically turning the Fan On.