Table of Contents
Advertisement
Quick Links
WARNING:
Improper installation,
adjustment, alteration, service
or maintenance can cause
injury or property damage.
Read the installation,
operation and maintenance
instructions thoroughly
before installing or servicing
this equipment.
DANGER:
Failure to follow these
instructions could result in
fire or explosion that could
cause property damage,
personal injury or death.
DANGER:
DO NOT use gas grill for
indoor cooking or heating.
TOXIC fumes can accumulate
and cause asphyxiation. DO
NOT use in or on boats or
recreational vehicles.
PROP 65 WARNING:
Chemicals known to the state
of California to cause cancer,
birth defects or other
reproductive harm are created
by the combustion of
propane.
WARNING:
FOR YOUR SAFETY:
For Outdoor Use Only
(outside any enclosure)
GSF3016E
Owner's Manual
4 Burner LP Gas Grill
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
IF YOU ARE ASSEMBLING THIS UNIT FOR SOMEONE ELSE,
GIVE THIS MANUAL TO HIM OR HER TO SAVE FOR FUTURE
REFERENCE.
FOR CUSTOMER SERVICE, EMAIL TO
SERVICE@BBQTEK.COM OR
CALL 1-877-885-8227 (TOLL-FREE), 07:00 A.M. – 16:00 P.M.
(EST), MONDAY-FRIDAY.
Service Center: 1-877-885-8227
0
MODEL# GSF3016E
Advertisement
Table of Contents
Related Manuals for Bond GSF3016
Summary of Contents for Bond GSF3016
- Page 1 MODEL# GSF3016E 4 Burner LP Gas Grill WARNING: Improper installation, adjustment, alteration, service or maintenance can cause injury or property damage. Read the installation, operation and maintenance instructions thoroughly before installing or servicing this equipment. DANGER: Failure to follow these instructions could result in fire or explosion that could cause property damage,...
-
Page 2: Grill Operation
Grill Operation 1-2-3 Before Grilling Step 1 Keep your grill a safe distance away from your property. Step 2 Always perform a leak test on all connections and hoses. Step 3 Keep children away from the grill. During Grilling (To avoid tripping safety valves, please follow these instructions carefully!) Step 1 First open lid and turn gas tank on slowly. -
Page 3: Table Of Contents
Table of Contents For Your Safety ........................ 3 Package Contents ......................5 Hardware Contents ......................6 Assembly Instructions..................... 7 Operating Your Grill....................... 12 Connecting & Disconnecting The Gas Cylinder............12 Checking for Leaks......................13 Lighting Your Grill......................13 Excess Flow Safety Valve Reset Procedure ............... 15 Care and Maintenance .................... -
Page 4: For Your Safety
For Your Safety Dear Valued Customer, Congratulations on your new barbecue grill purchase! You’ve made the right choice. In this manual, you will find assembly instructions, suggestions for grilling and helpful hints, as well as guidelines for the safe operation, proper care and use of your grill. -
Page 5: General Information
WARNING: Do not use this appliance under overhead combustible surface or covered area (e.g., awnings, umbrellas, porches or gazeboes). Always confirm that this grill is not positioned under the overhang of a house, a garage or other structure before lighting it. An overhang will serve to deflect flare-ups and radiated heat into the structure itself, which could result in a fire. -
Page 6: Package Contents
Package Contents GSF3016E Owner’s Manual... -
Page 7: Hardware Contents
Hardware listed above is not scaled to exact size. (A screwdriver is required on assembly and is included for your convenience). GSF3016E Owner’s Manual... -
Page 8: Assembly Instructions
Assembly Instructions Remove all contents from the carton packaging. Make sure all parts are present before attempting assembly. Once the grill is fully assembled, go back and check to make certain all the bolts are secure. Tighten again using the screwdriver provided if necessary. - Page 9 Step 3 (Cart Back Panel Assembly) Loosen the lower pre-installed bolt on the leg of left cart side panel and allow 1/4 bolt’s length to extend from the leg. Align the hole on the cart back panel (P) with the extended two bolts on the leg.
- Page 10 Step 6 (Doors and Storage Basket Assembly) a) Insert the bottom pin of right door (Z) into the pre-drilled hole on the cart bottom panel (R). b) Push down the top pin of right door and insert it into the pre-drilled hole on the upper cart front beam (O).
- Page 11 Step 9 (Side shelf assembly) a) Loosen the four pre-installed bolts on the side of control panel and left cart back leg, and allow 1/4 bolt’s length to extend, align the holes on the left side shelf with the extended bolts, then push down on the left side shelf until it clocks into place, tighten by hand until secure.
- Page 12 Step 12 (Tank clip assembly and gas tank installation) a) Insert the two feet of tank clip (Q) into the holes on the tank holder, place the gas tank on the tank holder and clip it using the tank clip. b) Connect the tank with regulator by screwing the collar onto the tank valve.
-
Page 13: Operating Your Grill
Operating Your Grill CAUTION: Use only the regulator provided. If a replacement is necessary, call our customer service center. The use of unauthorized parts can create an unsafe condition and environment. The propane gas supply cylinder used must be constructed and marked in accordance with the Specifications for Propane Gas Cylinders of the U.S. -
Page 14: Checking For Leaks
6. Always confirm that all burner control knobs are in the OFF position before disconnecting the gas supply. 7. Before disconnection, be sure that the tank valve is in OFF position. 8. Always disconnect the gas supply regulators as followings: Loosen the connection collar by turning it anti-clockwise with one hand while holding the regulator with the other hand and take the nipple of the valve out of the tank valve. - Page 15 7. To ignite remaining burners, repeat same procedure for adjacent burner and continue in sequence. 8. Adjust valve knob(s) to desired cooking temperature. Using the Lighting Stick to Light the Main Burners 1. Insert a match into the end of lighting stick. Light the match. 2.
-
Page 16: Excess Flow Safety Valve Reset Procedure
Burner installation and adjustment End edge should face towards upside. 1. Release the screw on venturi tube. 1. Overlap 14 mm between 2. Adjust the flame by turning the collar on venturi tube and nozzle head of venturi tube from back side of the when assembling. -
Page 17: Care And Maintenance
WARNING: The cylinder valve always has to be above the horizontal position, for the cylinder to have vapor withdrawl only. CORRECT WRONG WRONG WRONG Care and Maintenance IMPORTANT Always allow to completely cool off before covering your grill to prevent corrosion from condensation. CAUTION: All cleaning and maintenance should be done when the grill is cool, with the fuel supply turned off at the control dial and the propane cylinder disconnected. -
Page 18: Troubleshooting
Troubleshooting Problem Possible Cause Prevention/Cure urner will not light using knobs or Wires and/or electrode covered with Clean wire and /or electrode with igniter. cooking residue. rubbing alcohol. Electrode and burners are wet. Wipe dry with cloth. Electrode cracked or broken – Replace electrode. - Page 19 Grease buildup. Clean grill. Flare-up. Excessive fat in meat. Trim fat from meat before grilling Excessive cooking temperature. Adjust (lower) temperature accordingly. Grease trapped by food buildup Turn knobs to OFF. Turn gas OFF at Persistent grease fire. around burner system. propane tank.
-
Page 20: Warranty Program
Warranty Program Proof of purchase is required to access this warranty program, which is in effect from the date of purchase. If unable to provide proof of purchase or after the warranty has expired, customers will be subject to parts, shipping and handling fees. Full 30-Day Warranty Any missing parts can be replaced at no charge within 30 days from the date of purchase with a valid proof of purchase.