GRASS VALLEY LDK 4502 User Manual
  1. Manuals
  2. Brands
  3. GRASS VALLEY Manuals
  4. Docking Station
  5. LDK 4502
  6. User manual
GRASS VALLEY LDK 4502 User Manual

GRASS VALLEY LDK 4502 User Manual

Hdtv camera base station
Hide thumbs Also See for LDK 4502:
Table of Contents

Advertisement

Quick Links

LDK 4502/4503/4506
HDTV camera base station
User's Guide
3922 496 30381 February 2008 v3.5
Prod
Prog
Cam +Floor
Eng
Camera
On Air
Base
Camera
Test
Connected
Communication
Station
Camera Base Station

Advertisement

Table of Contents
loading

Related Manuals for GRASS VALLEY LDK 4502

Summary of Contents for GRASS VALLEY LDK 4502

  • Page 1 User’s Guide 3922 496 30381 February 2008 v3.5 Prod Prog Cam +Floor Camera On Air Base Camera Test Connected Communication Station Camera Base Station LDK 4502/4503/4506 HDTV camera base station...
  • Page 2 Declaration of Conformity We, Grass Valley Nederland B.V., Kapittelweg 10, 4827 HG Breda, The Netherlands, declare under our sole responsibility that this product is in compliance with the following standards: - EN60065 : Safety - EN55103-1: EMC (Emission) - EN55103-2: EMC (Immunity) following the provisions of: a.

  • Page 3: Table Of Contents

    Using an OCP 400 to set up the Base Station ......44 LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)
  • Page 4 Diagnostics menu structure........73 LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)
  • Page 5 Diagnostics menu ..........83 LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)
  • Page 6 Valley at + 800 80 80 20 20 or +33 1 48 25 20 20 from most other countries. In the US and Canada please call 800-547-8949 or 530-478-4148. Ask to be connected to the EH&S Department. In addition, information concerning the program can be found at: www.thomsongrassvalley.com/environment LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 7: Important Information

    – Warnings indicate danger that requires correct procedures or practices to prevent death or injury to personnel. – Cautions indicate procedures or practices that should be followed to prevent damage or destruction to equipment or property. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)
  • Page 8 For safety reasons the Base Station must be mounted in a 19-inch rack which has safety covers according to IEC65. When two Base Stations are mounted above each other, the minimum distance between them must be 50mm or the rack must be force-air cooled. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)
  • Page 9 This separation can be achieved by using an isolation transformer between the local power outlet and the equipment connected to the camera. Alternatively, use equipment that has a double insulation and therefore does not require an earth connection. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)
  • Page 10 – Insert connectors straight and fully into their corresponding sockets. – In fiber optic cable systems always put the dust caps on cable and panel connectors immediately after disconnecting a cable. Keep the dust caps clean. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 11: Base Station Earthing

    (FPE) qualities as stated in the VDE regulation 0800/part2. A low impedance interconnection of both earth conductors must be provided at the central studio earthing point. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)
  • Page 12 The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLACK. Ensure that your equipment is connected correctly - if you are in any doubt consult a qualified electrician. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 13: Chapter 1 - Introduction

    Bandwidth efficient channel combining and equalization techniques minimize cross-talk and interference. Teleprompter and viewfinder signals maintain high performance with relatively long cable lengths. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 14: Hd Fiber Features

    1kHz test-tone generator and voicemail extend the functionality even further. The voicemail stores messages from a combination of sources like Program, Production or Engineering for the camera operator. By adding the engineering intercom module, a 5-channel full-featured intercom is possible. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 15: Features

    Heavy-duty concept with low power consumption, ideal for Outside Broadcast (OB) vans. • TriaxHD version (LDK 4502) and TriaxHDHS (LDK 4506) allow video transmission and remote control of cameras up to a distance of 1,200 m (4,000 ft) and beyond, using industry standard 14 mm (0.55 in) Triax cables.

  • Page 16: Packing/Unpacking

    Use a layer of shock-absorbing material around all sides of the unit to provide firm cushioning and prevent movement inside container. Seal shipping container securely. Mark shipping container FRAGILE to ensure careful handling. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 17: Chapter 2 - Installation

    If required, a series 9000 OCP can be connected directly to a Base Station using a 2-wire bus cable. In this situation no loop-through is available and the camera number must be set to 1. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 18: Camera With Triax Adapter And Superxpander

    The Base Station must always be connected to protective earth. Do not interrupt the protection conductor inside or outside the unit. Do not disconnect the protective earth terminal. Intentional interruption is prohibited and is likely to make the unit dangerous. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 19: Base Station Earthing

    270 Watt (470 VA) 2.3.1 Base Station earthing The rear of the unit has two separate screw terminals for protective earth (PE) and video earth (VE). These are normally connected by a metal strap. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 20: Connecting The Studio Intercom System

    ENG in/out PROD in/out Figure 2-4. Intercom connection (four-wire system) Housing Housing PROG in ret. PROG in ENG out ENG in ret. ENG in PROD in ret. PROD in PROD out LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 21: Connecting The Studio Signalling

    A selection in the SYSTEM/SIGNALLING menu allows you to make the state of the function (on or off) correspond to a particular input signal. There are two leads for each connection - Send and Return. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)
  • Page 22 * use either Send or Return only, do not mix. Figure 2-7. Common ground signalling Signal 1 Signal 2 base unit signalling connector Signal n Common External On-Air signaling with common contact LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 23: Audio Level

    -22 dBu +4.3V -28 dBu +3.7 V -34 dBu +3.1 V -40 dBu +2.5 V -46 dBu +1.9 V -52 dBu +1.3 V -58 dBu +0.7 V -64 dBu GND (pin 15) LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 24: Auxiliary Connections

    2400 bits/sec typical; 4800 bits/sec max. Input level TTL, possible RS232 ("0"= 0V +/- 0.5V; "1"= 5V +/- 0.5V) Input impedance 100 KΩ 150 Ω Output impedance Max load ~1 KΩ LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 25: Base Station Connectors

    CVBS VIEW HDTV Audio out Caution Do not allow system earth currents to exceed 1.5 A in the outer shield of the Triax cable or 0.2 A in other cable shields. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 26: Triax/Fiber Module

    The Triax connector can be mounted to suit your cable run. Figure 2-12. Hybrid fiber connector Power fiber A Return fiber B Shield Shield of cable directly to the connector housing. LEMO; panel view (X540) LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 27: Dsc Interface Board Hd

    SDI 3 Standard SD-SDI output signal Text Viewfinder text output signal TP (in) Teleprompter input signal TP (out) Teleprompter looped-through signal REF (in) Reference input signal REF (out) Reference looped-through signal LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)
  • Page 28 REF (in) Reference input signal REF (out) Reference looped-through signal ☞ Note In normal speed video mode BNC outputs PH1, PH2 and 1+2 carry the same standard HD-SDI digital video signal. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 29: External Video Board

    External 2 input signal External 2 looped-through signal 2.7.4 Monitoring board Figure 2-16. Monitoring board BNC connectors Monitor HDTV Text Signal Monitor Monitoring output signal Monitoring looped-through signal Standard VGA output signal LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 30: Communication Module Connectors

    Panel part number 2411 022 05292 On-Air in ext. return Cable part number 2411 022 06157 Call in ext. return Audio 2 level (see pin 6) Shield of cable to the pin marked housing. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)
  • Page 31 SubD 9-pin female; panel view (X371) Private data out return Private data in retreturn Panel part number: 2411 022 06238 Cable part number: 2411 022 05284 Shield of cable directly to the connector housing. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)
  • Page 32 Data not Not connected Shield Shield of cable to the pin marked housing. 4-pin male; panel view (X368 / X3784) Panel part number: 2411 020 11367 Cable part number: 2411 020 12025 LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 33: Power Connector

    Microphone level -64 dBu XLR 5-pin female; panel view (X574) Microphone impedance 200 Ω Telephone level +6dBm nominal Telephone output impedance < 50 Ω Shield of cable directly to the connector housing. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)
  • Page 34 Chapter 2 - Installation LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 35: Chapter 3 - Configurations

    OCP 400 operational control panel can be connected directly to the Base Station using a cross- over Ethernet cable. Figure 3-1. Camera in TriaxHD mode Camera External Power video in Cross over Ethernet cable Camera Base Station Base Station Audio Video Teleprompter Tracker headphone OCP 400 LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 36: Multiple Cameras In C2Ip Network

    Base Station Ethernet cable Camera Base Station Camera Base Station Ethernet cable Camera Base Station Camera Base Station Hub or switch Ethernet cable MCP 400 OCP 400 OCP 400 OCP 400 LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 37: Camera And Superxpander

    Base Station using a cross-over Ethernet cable. The Base Station is powered by a mains power supply. Figure 3-3. Camera with SuperXpander and TriaxHD adapter Camera + SuperXpander External Power video in Cross over Ethernet cable Base Station Audio Video OCP 400 LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 38: Sportcam With High-Speed Base Station

    The BNC output connectors PH1 and PH2 on the rear of the high-speed base station provide dual phase serial digital video signals. These odd and even field signals are suitable for a high- speed recording system. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 39: Triax Cable Lengths

    700 m (2,300 ft) 14 mm (0.55 in) 1,200 m (4,000 ft) ☞ Note The maximum cable length for 8 mm (0.33 in) Triax is adversely influenced by the power consumption of the camera. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)
  • Page 40 Chapter 3 - Configurations LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 41: Chapter 4 - Using The Base Station

    Base Station are OK. On Air and ISO indicators The red LED lights when the Camera is On Air. If the Camera is selected as ISO Camera the yellow LED lights. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 42: Setting Up The Base Station

    Camera Base Station Left front cover Open clasp Intercom connector Prod Prog Cam +Floor Camera On Air Base Camera Communication Station Test Connected Camera Base Station Display Rotary / Push button LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 43: Set-Up Items

    When NN is displayed, push the Rotary/Push button twice to enter the System Menu. The Rotary/Push button can be used to navigate through the menu system, however, it is more convenient to use the OCP connected to the Base Station. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 44: Using An Ocp 400 To Set Up The Base Station

    Select the MENU item of the BS menu to access the internal menu of the Base Station. The internal menu appears on the Base Station Text output and CVBS output (if switched on). LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 45: Using The Base Station System Menu

    The main menu screen shows five items and the name of the menu. One more item is hidden but becomes visible when you scroll down. A cursor shows your position in the menu. The Rotary/Push button moves the cursor up and down. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 46: Finding Your Way

    To find out where to change a function, consult the List of System Menu Functions at the end of this section to find out under which menu group or subgroup the function is located. If the LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 47: Using The Recall File To Undo Changes

    The functions contained under this menu control various aspects of audio and intercom. System menu This menu contains the functions that are used to set up the general configuration and for carrying out adjustments and calibrations of the Base Station. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 48: Base Station User Levels

    It should only be used when carrying out the gain adjustments on the Sync/Encoder board in conjunction with the procedure given. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 49: Mcp Availability

    Saturation (Yes/No) White clipper (Yes/No) Knee slope (Yes/No) Knee point (Yes/No) Iris(Normal/Reverse) Normal OCP lock (Upper/Total) Total Intercom (System/Isolate) System Audio (External/MCP) External Aspect Ratio (External/MCP) External Aspect Ratio (4:3/16:9) Autolight (Yes/No) LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 50: Intercom Set Up

    Set the input and output intercom levels for the PROD and ENG channels. The range is 00 to 99; default is 50. • Set the input level for the PROG channel. • Set the levels for the sidetone in a two-wire system in this menu. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 51: Base Station Headset Set-Up

    AUDIO/INTERCOM menu of the Base Station, then the tracker microphone signal is not available in the Base Station and the Program signal is not available in the camera. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 52: Voice Mail

    Listening to the message Push the camera call button to start playing out the recorded voice mail to the camera headset. Push the call button again to stop playing the voice mail message. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 53: Chapter 5 - Diagnostics

    The red LED lights when the Camera is On Air. If the Camera is selected as ISO Camera the yellow LED lights. 5.1.3 Base Station indicator This green LED lights when the Base Station is operationally ready. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 54: Camera Indicators

    MCP , OCP or Base Station menu. Communication Test Connected Remark green Camera power switched off by the camera power switch. yellow Camera power switched off by the MCP , OCP or base station menu. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 55: Triax Diagnostic Indications

    2. Indicates a short circuit between the outer and inner shield while the camera is NOT connected. Base Station diagnostic message: DIAGNOSTICS/BOARD DIAGNOSTICS/POWER BOARD/ TRIAX STATUS >> COPEN LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 56: Core Short

    Indicates a short circuit between the core and the inner shield while the camera is NOT connected. Indicates a short circuit between the core and the outer shield while the camera is NOT connected. Base station diagnostic message:DIAGNOSTICS/BOARD DIAGNOSTICS/POWER BOARD/ TRIAX STATUS >> CSHRT LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 57: Shield Open

    Figure 5-5. Fault conditions for Total_Short message Indicates a short circuit between the inner shield, the outer shield and the core. Base station diagnostic message:DIAGNOSTICS/BOARD DIAGNOSTICS/POWER BOARD/ TRIAX STATUS >> TSHRT LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 58: Sync/Encoder Hd Board Status

    Sync Lock: - lights (green) if the Hor. and Vert. lock is OK. Ext. Ref. Avail.: - lights (green) if an external sync. signal is present. Burst Lock: - lights (green) if the subcarrier/H-phase lock is OK. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 59: Chapter 6 - Preventative Maintenance

    DSC Interface board HD Triax/Fiber filter module Triax/Fiber power module HD SDI SDTV Monitor External Data1 Sign I / Com CVBS Network CVBS CVBS RS232 HD-SDI Text CVBS VIEW HDTV Audio out LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 60: Replacements

    Figure 6-3. Installing the Power Unit Camera On Air Base Camera Camera On Air Base Camera communication Mains Station Test Connected communication Mains Station Test Connected Camera Base Station Camera Base Station WRONG CORRECT LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 61: Replacing Dust Filters

    Slide back support with dust filter out of base station. Remove dust filter. Place clean dust filter in back support. Slide back support with dust filter into base station. Fix support with 4 screws. Figure 6-4. Replacing side dust filters LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)
  • Page 62 Remove front cover Power Unit. Remove dust filter. Place clean dust filter. Return front cover Power Unit to its position. Figure 6-5. Replacing front dust filters PCB front cover Power Unit cover LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 63: Chapter 7 - Specifications

    HD tri-level sync or SD Black Burst Video outputs 3x BNC, 0.8 Vpp, 75 Ω, SMPTE 292M, HD-SDI 1080i or 720p at 59.94 or 50Hz BNC, 1.0 Vpp, 75 Ω VBS (monochrome) Text out LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)
  • Page 64 296M (depending on acquisition format); R, G, B or Y (menu selection) with HD tri-level sync. Analog HDTV out VGA-type D-connector, 15-pin, female, with R, G, B, H-sync and V-sync Frequency response 0.1 to 30 MHz (+0.5 dB/- 1 dB) LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 65: Dimensions

    Figure 7-1. Dimensions 483 mm 465 mm Prod Prog Cam +Floor Camera On Air Base Camera 57 mm 88 mm Communication Station Test Connected Camera Base Station 438 mm 510 mm LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)
  • Page 66 Chapter 7 - Specifications LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 67: Chapter 8 - Menu Structure And Contents

    8.1.1 Top menu structure Video menu >> Monitoring menu >> Audio/Intercom m. >> SDTV menu >> System menu >> Files menu >> Diagnostics menu >> LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 68: Video Menu Structure

    O Studio > O Studio O Operator > O Name O Camrea number O Cable length O Operator O HD out text > O Name O Warning Y-pos O CamName Y-pos LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 69: Audio/Intercom Menu Structure

    O Mic to Headset O Cam to Headset O Cam Volume O Tracker to Headset O Tracker Volume O Mic Eng-Out O Mic to Eng-Cam O Record Eng O Record Prod O Record Prog LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 70: Sdtv Menu Structure

    O Skin1 Color R O Skin1 Color B O Skin2 Window R O Skin2 Window B O Skin2 Color R O Skin2 Color B Notch Level SDI Amplitd Ext1 SDI Amplitd Ext2 LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 71: System Menu Structure

    SDI Chroma Ext1 SDI Chroma Ext2 O H Phase Coarse O H Phase Fine O Subcarrier Coarse O Subcarrier Fine Subc H Ph. Coars. 180 Subc H. Ph. Fine Month Year Hour Minute LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 72: Files Menu Structure

    User System Files O Store exec Std. System Files O Operator File CUST O Recall exec Store exec System File sbs1 Recall exec Store exec System File CUST Recall exec Store exec LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 73: Diagnostics Menu Structure

    O Test Tone Cam Mi O Carrier Eq. Ext1 O Carrier Rcve Ext1 O SDI Lock Ext1 O SDI TV Sys Ext1 O Carrier Eq. Ext1 O Carrier Rcve Ext1 O SDI Lock Ext1 LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 74: Menu Contents

    Colour Bar On, Off Oper Scene Colour Bar Type SMPTE, Fulle Changes the colour bar type (only HDTV Install out) Ext Black Clamp 0..99 (50) Install Combine Field, 2-line, 4-line Oper Scene LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 75: Monitoring Menu

    HD Out Text Warning Y-pos 1..14 (14) Sets the vertical position of the warning Oper. text. CamName Y-pos 1..14 (1) Sets the vertical position of the camera Oper. name. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 76: Audio/Intercom Menu

    Sets headset microphone sensitivity level. Oper Oper Side Tone 0..99 (50) Sets headset side tone (feedback) level. Oper Oper Mic to Headset On, Off Turns headset side tone on or off. Oper Oper LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)
  • Page 77 On, Off When turned on, intercom messages from Oper Oper the PROD channel are recorded. Record PROG On, Off When turned on, intercom messages from Oper Oper the PROG channel are recorded. LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 78: Sdtv Menu

    Select signal type for the Options outputs Install Scene Aspect Ratio 16:9, 4:3 Selects aspect ratio for SDTV signal. Install Letterbox Off, 16:9 Selects letterbox function (only when Install aspect ratio = 4:3) LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)
  • Page 79 1 (only when the LDK4530/10 External Video module is installed.) SDI Amplitude Ext2 0..99 (50) Sets SDI signal amplitude for external video Install Syst input 2 (only when the LDK4530/10 External Video module is installed.) LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 80: System Menu

    Camera power On, Off Turns the power the camera on or off Oper Oper MCP Available Yes, No Refer to the user’s guide MCP not available Install Oper section! Signalling inputs LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)
  • Page 81 Selects a TV system for the Base Station Install CVBS output signal. Teleprompter On, Off Turns teleprompter channel on or off. Install OCP Contour Mode SDTV, HDTV Selects OCP Contour Mode. Install LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 82: Files Menu

    Selects standard system file to use: Install Cust(omer) or Fact(ory). Recall exec > run > exec Recalls selected standard system file. Install Store exec > run > exec Stores selected standard system file. Install LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

  • Page 83: Diagnostics Menu

    Refer to the Diagnostics section in this Oper SOPEN, PSHRT, NOCAM, user’s guide for a description of the Fiber ERROR, OVRLD, PWOFF , Status. UKNOW Local Power Status Ok, NotOK Shows status of the power board. Oper LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)
  • Page 84 Carrier Eq Ext2 Yes, No Oper Carrier Rcve Ext2 Yes, No Oper SDI Lock Ext2 Yes, No Oper SDI TV system Ext2 625. 525 Oper BS TV system PAL, NTSC Oper LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)
  • Page 85 On, Off Oper AGC Out OK On, Off Oper Communications Diag. Camera Connected Yes, No Oper OCP Connected Yes, No Oper MCP Connected Yes, No Oper C2IP panels 0..10 (0) Oper LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)
  • Page 86 Chapter 8 - Menu structure and contents LDK 4502/4503/4506 HDTV camera base station User’s Guide (v3.5)

This manual is also suitable for:

Ldk 4503Ldk 4506

Table of Contents