Room Monitor; Night Service - Siemens HiPath 1100 User Manual

Miscellaneous functions
Step by step
96

Room Monitor

... From an Extension
p
Enter the extension number for the room you want to
monitor (e.g., 11/101).
w s
Wait. The user calls the extension assigned to the fea-
ture to hear the audio signals present.
... From an external telephone
Required: The telephone must be a DTMF telephone or
you must be able to switch it to DTMF . The telephone is
not connected to the system.
p
Connect to the HiPath 1100. Enter the DISA-MSN num-
ber (ask your support technician).
p
Wait for a continuous tone (if necessary, switch to DT-
MF) then enter your internal number and the lock's
password.
p
Enter the number for the extension to be monitored.
w s
Wait. The user calls the extension assigned to the fea-
ture to hear the audio signals present.

Night service

The night service feature enables DIDs on the night ta-
ble. It can be activated or deactivated at any system ex-
tension.
When night service is ON - for example, at lunch time
or after business hours-- all external calls are forwarded
to a specified internal extension (night destination). The
category of the extension may or may not be changed.
The night service extension and the required password
for activation/deactivation are specified by the system's
support technician.
[1]Extensions are configured during system programming (see Pro-
gramming an extension - night service in the Programming manual).
If night service is ON, a distinctive tone will be heard when you
lift the handset.
An extension's category may be changed.
1