Siemens HiPath 1100 User Manual page 56

Functions used during calls
Step by step
*60=ACCT CODE?
ACCOUNT CODE
56
p
Enter the account code (a sequence of up to 10 digits
from 0 to 9).
r
If the account code has not been configured using Hi-
Path 1100 Manager or the option to validate the account
code is deactivated, this key closes the sequence of
digits if the code has fewer than 10 digits.
If the account code has been configured using HiPath
1100 Manager and the option to validate the account
code is activated, this key should not be used.
p
Enter the code to access an external line (e.g., 0) and
the external number you want to call.
ws
Wait for the call to be answered. Start conversation.
Incoming external calls (optional)
Required: During the conversation.
Press to access the Service menu.
Select and confirm.
or
Press the account code key.
p
Enter the account code (a sequence of up to 10 digits
from 0 to 9).
r
If the account code has not been configured using Hi-
Path 1100 Manager or the option to validate the account
code is deactivated, this key closes the sequence of
digits if the code has fewer than 10 digits.
If the account code has been configured using HiPath
1100 Manager and the option to validate the account
code is activated, this key should not be used.
s
Proceed with the conversation.