View Timeout - Siemens HiPath 1100 User Manual

Step by step
#65 = Show time?
TIMEOUT
HH:MM
HH:MM
06:30 SEC 03.OUT 05
27
Required: This feature must have been configured and
activated for the extension.
p
Enter an external number.
w s
Wait for the call to be answered. Start conversation.
w
The time count set for the extension is started.
t
The call is disconnected once the specified time has
elapsed.

View timeout

This allows you to view the time spent and the time re-
maining for making external calls.
Required: This feature must have been configured and
activated for the extension.
Press to access the Service menu.
Select and confirm.
or
rji
Enter the code for "view timeout".
or
Press the "TIMEOUT" key.
Shows the time spent for 5 seconds.
Shows the time remaining for 5 seconds.
The system shows the date and hour again.
HiPath 1100 >
Calls may also be interrupted if the extension has
been configured with these features:
• "Timer for outgoing external calls", the
timeout stops counting.
• "Billing for an extension" - the call will only
be started or can continue if the time and
credit limit have not been reached.
For simultaneous calls, call times will be counted
separately.
If the call ends before a cycle is complete, the
time will be counted as if the call had completed
a 5-second cycle.
Functions used for making calls
41