Opening And Closing The Hp Netserver; Introduction; Tools Required - HP NetServer LC 2000r Installation Manual

3 Opening and Closing the HP
NetServer

Introduction

This chapter describes how to safely extend the rack-mounted HP NetServer
LC 2000r out of the rack and how to remove and replace the covers from the
HP NetServer LC 2000r and the pedestal model, HP NetServer LC 2000. This
chapter also describes how to remove and replace the pedestal base from the
HP NetServer LC 2000.
WARNING Before removing the covers, shut down the operating system
and disconnect the power cords and unplug telephone cables.
Disconnect the power cords to avoid exposure to high energy
levels that may cause burns when parts are short-circuited by
metal objects, such as tools or jewelry. Disconnect telephone
cables to avoid exposure to a shock hazard from telephone
ringing voltages.

Tools Required

l An anti-static service kit (3M™ 8501/8502/8503 or equivalent). This kit
includes a static-dissipating work surface, a chassis clip lead, and a wrist
strap.
21