Replicate Configuration; Nos Installation - HP NetServer LC 2000r Installation Manual

Chapter 10

Replicate Configuration

In Replicate configuration mode, you can save a copy of your current system
configuration or load a previously saved configuration. This method saves time
when configuring multiple, identical systems. Select Replicate on the
Configuration Assistant menu.

NOS Installation

The NOS installation process, whether automated or manual, is the same in
custom configuration mode as in Express configuration mode:
For Manual NOS Installation Only:
Before you perform a manual NOS installation, you must manually create
NOS-specific drivers diskettes and print instructions, as follows:
Create Drivers Diskette(s): On the Create Drivers Diskette(s) screen,
select Create Drivers Diskette(s) to create one or more customized
diskettes containing HP drivers and configuration files to use when you
install the NOS.
Print and Read Instructions: You may already have done this directly
from the Custom Configuration menu option Show NOS Instructions.
If not, on the Show NOS Installation Instructions screen, select Save to
Disk to copy the Network Operating System Installation Instructions to
disk. Then print them out from the disk. Read the instructions first and
then follow them to manually install the NOS.
Install NOS:
Automated NOS Installation:
For certain versions of Novell NetWare/IntranetWare or Microsoft
Windows NT Server, Configuration Assistant partitions and formats
the hard disk drive, and Installation Assistant guides you through the
NOS installation and configures the NOS with the appropriate drivers
for the HP-bundled configuration.
Manual NOS Installation:
Follow the instructions on the screen and the Network Operating
System Installation Instructions that you printed out.
Configuring the HP NetServer
107