Transmitter Programming Guide
These transmitters use icons (symbols) to identify the reaction your
security system, keyless entry, and/or remote start system, where
applicable, will have when any icon (button) is pressed. The icons
are programmed at time of installation to meet the needs of the individual
and to complement the vehicle that the system is installed in. To replace
a transmitter or add transmitters, please follow the programming
instructions listed on the pages of this manual.
RECEIVER
BUTTON
CHANNEL
1
2
1
3
3
*4
*5
* Where So Equipped
Model 095BPr
SYSTEM FUNCTION
Lock And Arm Alarm, also initiate and
terminates *Panic.
Unlock And Disarm, also initiates and
terminates *Panic. Programmable to
unlock drivers door and/or all doors.
Lock and arm/unlock and disarm. May
be programmed to unlock driver's door
or all doors. Also will initiate and
terminate *Panic.
Pulsed or switched output to control
Remote Trunk Release or optional
device connected to channel 3.
When pressed and release two times,
will provide pulsed output or activate the
Remote Start option when installed.
When so equipped, this button can be
used to operate an optional device
connected to channel 4.
When so equipped, this button can be
used to operate an optional device
connected to channel 5.
1
128-8679
1 of 8