Oregon Scientific Smart Dynamo PE128 Quick Start Manual

24/7 Activity Tracker
EN
OVERVIEW
4
1. LED Indicator
2. Button
3. Snap buttonholes
4. Snap buttons
5. Smart core
CHARGING AND INDICATORS
Charge the smart core for at least 1 hour before your
first use.
1. Unwire the USB cable from the charger pod.
2. Align the two metal connection points of the charger
pod with the pair on the smart core.
3. Make the connection points approach to each other
by magnetic till they are completed connected.
4. Plug the big end of the USB cable into USB port of
your PC.
5. Once the smart core is correctly connected with the
charger pod, the indicator turns on.
Green is on
Red blinks 3 times when
the button is pressed.
GET STARTED
WEAR
Your activity tracker is adjustable to fit for different wrist
sizes. Make sure the activity tracker is not too loose to
avoid inaccurate calculations.
APPLICATION
Your activity tracker can help track your activities during
the day and your sleep status at night while transmitting
your data with your mobile device.
Download 'Dynamo' application (
in the Apple App Store. Visit the official website of your
activity tracker through
ssmart.oregonscientific.com/dynamo
Connect to your mobile device:
Activate Bluetooth on your smart phone. Press and hold
operational button for 5 seconds. The indicator will flash
3 times in blue.
SETTINGS
Edit your profile at anytime following the below steps:
1. Tap
2. You can set different settings, including User,
Activity, Wake up time and Support.
NOTE
1. If you want to use another compatible activity tracker,
you need to unpair the previous activity tracker from
the application.
2. The activity tracker will automatically deactivate the
sleep mode and then switch to the activity mode at your
set wakeup time to avoid that user forgets to switch back
to the activity mode by pressing the button.
Model: PE128

Quick Start Guide

Indicators
Red is on
icon to enter setting screen.
1 2
5
1
3
Charging completed
3
Status
Charging
Low battery
). It is available
2
4