Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Dishlex DX 301
Summary of Contents for Dishlex DX 301
- Page 1 User manual Dishwasher DX 301...
-
Page 2: Table Of Contents
Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 12 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4 What to do if…... - Page 3 • A qualified and competent person must do the Contact your local Customer Care Centre. plumbing installation. • Do not drill into the sides of the appliance otherwise • Do not change the specifications or modify this prod- damage to hydraulic and electrical components may uct.
-
Page 4: Control Panel
Control panel On/off button Button Lock Program selection buttons Delay start button Indicator lights Digital display Indicator lights Washing The indicator light comes on when the washing phase or the rinsing phase operates. Drying The indicator light comes on when the drying phase operates. -
Page 5: Digital Display
Follow these steps to set the Button Lock function: Digital display 1. Switch on the appliance. The display shows: 2. Set a washing program. • program duration, 3. Start the washing program. • remaining time to the end of the program, 4. -
Page 6: Washing Programs
Washing programs Washing programs Program Degree of soil Type of load Program description Pots Heavy soil Crockery, cutlery, Prewash pots and pans Main wash up to 70°C 2 intermediate rinses Final rinse Drying Crockery, cutlery, Prewash Auto pots and pans Main wash up to 50°C or 65°C 1 or 2 intermediate rinses Final rinse... -
Page 7: Use Of The Appliance
The pressure and temperature of the water, the variations of power supply and the quantity of dishes can change these values. Use of the appliance 4. Fill the detergent dispenser with the correct quan- Refer to specified instructions for each step of the pro- tity of detergent. - Page 8 • While you load cutlery and dishes, do these steps: – Load hollow items (e.g. cups, glasses and pans) with the opening down. – Make sure that water does not collect in the con- tainer or in a deep base. –...
-
Page 9: Use Of Detergent
Follow these steps to move the upper basket to the Maximum height of the dishes lower position: upper basket lower basket 1. Pull the basket out until it stops. Upper position 20 cm 31 cm 2. Carefully lift the two sides upwards. 3. - Page 10 Refer to the instructions from the manufacturer for the use of these products. With tablets that contain rinse aid: • set the lowest position for the rinse aid dosage, • do not put rinse aid in the rinse aid dispenser. In this condition rinse aid indicator light is always on when you switch on the appliance.
-
Page 11: Select And Start A Washing Program
Select and start a washing program Cancelling delay start Set the washing program with the door ajar. The washing program only starts after you close the 1. Press and hold, approximately for 3 seconds, the door. Until then it is possible to modify the settings. two buttons above the word Cancel until all the program lights come on. -
Page 12: Care And Cleaning
• There can be water on the sides and door of the appliance. Stainless steel becomes cool more quick- ly than the dishes. Care and cleaning Warning! Switch the appliance off before you clean it. Cleaning the filters Important! Do not use the appliance without the filters. Make sure that the installation of the filters is correct. -
Page 13: What To Do If
If not possible, empty the appliance and close the door. 1. Disconnect the mains plug from the mains socket. Disconnect the water inlet hose and remove water from 2. Close the water tap. the water inlet hose. 3. Remove the appliance and the hoses. Moving the machine 4. - Page 14 For these data, refer to the rating plate. Product number : ..Write the necessary data here: Serial number : ..Model description : ..The cleaning results are not satisfactory The dishes are not clean • The selected washing program is not applicable for the type of load and soil.
-
Page 15: Technical Data
Technical data Dimensions Width (mm) Height (mm) Depth (mm) Electrical connection - Voltage - Information on the electrical connection is given on the rating plate on the Overall power - Fuse inner edge of the dishwasher door. Water supply pressure Minimum 50 kPa (7 psi) Maximum... -
Page 16: Installation
Make sure that the dimensions of the recess agree with the given dimensions. The steam protection foil is not supplied with free- standing models, but can be purchased from Electrolux Spare Parts. Water connection • If cold water pressure is in excess of 800 kPa, a Water inlet hose pressure reducing valve should be used. -
Page 17: Electrical Connection
The drain hose can be lengthened using additional lengths and connectors. These must be purchased from Electrolux Spare Parts. The extension length must not exceed 2 metres. Caution! Once connected the inlet hose to the The drain hose must be free of kinks and obstructions. - Page 18 Always plug the mains plug onto a correctly installed Never unplug the appliance by pulling on the cable. approved socket. Always pull the plug. Do not use multi-ways plugs, connectors and extension Test the appliance. Run a quick washing program and cables.
-
Page 19: Warranty
You agree that any re- placed Appliances or parts become the property FOR SALES IN AUSTRALIA AND NEW ZEALAND of Electrolux. This warranty does not apply to light This document sets out the terms and conditions globes, batteries, filters or similar perishable of product warranties for Electrolux branded ap- parts. - Page 20 Guarantees Act, the Sale of Goods Act and its Authorised Service Centres to exchange information the Fair Trading Act in New Zealand, imply war- in relation to you to enable Electrolux to meet its obli- ranties or conditions, or impose obligations, upon gations under this warranty.
- Page 24 156987653-03-112008...