Bluetooth module
✎
The Bluetooth module spare part kit does not include a Bluetooth module cable. The Bluetooth module cable is
available using spare part number 531811-001 for dv3-2000 computer models and 591417-001 for dv3-2300
computer models.
Description
Bluetooth module for use only with dv3-2000 computer models
Bluetooth module for use only with dv3-2300 computer models
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on,
and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a. Hard drive (see
b. Optical drive (see
c. Keyboard (see
d. Switch cover (see
e. Speaker assembly (see
f. Display assembly (see
g. Top cover (see
Remove the Bluetooth module and cable:
1. Disconnect the Bluetooth module cable 1 from the system board.
2. Remove the Bluetooth module cable from the clips 2 built into the base enclosure.
3. Remove the Bluetooth module and cable 3.
Reverse this procedure to install the Bluetooth module.
Maintenance and Service Guide
"Battery" on page
"Hard drive" on page
8)
"Optical drive" on page
"Keyboard" on page
25)
"Switch cover" on page
"Speaker assembly" on page
"Display assembly" on page
"Top cover" on page
44).
7).
23)
29)
31)
32).
Removal and replacement procedures
Spare part number
483113-001
537921-001
4–49
Comments to this Manuals
Latest comments: