Computer Setup-Security - HP Compaq dc5700 Series Utility Manual

Computer setup (f10) utility guide
Hide thumbs Also See for Compaq dc5700 Series:
Table of Contents

Advertisement

Computer Setup—Security
NOTE
configuration.
Table 4
Computer Setup—Security
Option
Smart Card Options
(some models)
Setup Password
Power-On Password
Password Options
(This selection appears
only if a power-on
password or setup
password is set.)
Embedded Security
(This menu item only
appears after the
Embedded Security
Device is made available
under Device Security.)
Device Security
ENWW
Support for specific Computer Setup options may vary depending on the hardware
Description
Allows you to enable/disable the Smart Card to be used in place of the Power-On Password.
Allows you to set and enable setup (administrator) password.
NOTE
If the setup password is set, it is required to change Computer Setup options, flash
the ROM, and make changes to certain plug and play settings under Windows.
See the Troubleshooting Guide on the Documentation and Diagnostics CD for more information.
Allows you to set and enable power-on password. The power-on password prompt appears after a
power cycle. If the user does not enter the correct power-on password, the unit will not boot.
NOTE
This password does not appear on warm boots , such as
Restart from Windows, unless enabled in Password Options, below.
See the Troubleshooting Guide on the Documentation and Diagnostics CD for more information.
Allows you to:
Lock legacy resources (appears if a setup password is set)
Enable/disable network server mode (appears if a power-on password is set)
Specify whether the password is required for warm boot
on password is set)
Enable/Disable Setup Browse Mode (appears if a setup password is set) (allows viewing, but
not changing, the F10 Setup Options without entering setup password)
See the Desktop Management Guide on the Documentation and Diagnostics CD for more
information.
Allows you to:
Enable/disable the Embedded Security device
Reset the device to Factory Settings
Enable/disable power-on authentication support. (some models)
Reset authentication credential. (some models)
This feature is supported on some models only. See the Desktop Management Guide on the
Documentation and Diagnostics CD for more information.
Allows you to set Device Available/Device Hidden for
Serial ports
Parallel port
All USB ports
Front USB ports
Ctrl
+
Alt
(Ctrl
+
Alt
+ Delete) (appears if a power-
Computer Setup (F10) Utilities
+
Delete
or
7

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Compaq dc5700 mt

Table of Contents