Table of Contents
Advertisement
OWNER'S MANUAL
GUIDE D'UTILISATION
32" CLASS LED-LCD HDTV
LED-LCD HDTV CATÉGORIE 32 PO
SLED3200
SLED3200A
If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the
required programming code.
Si vous utilisez avec cet appareil une télécommande universelle (autre que celle vendue avec ce téléviseur),
consultez la documentation accompagnant la télécommande universelle afin de connaître le code numérique cor-
respondant au téléviseur.
When shipped from the factory, the Signal Type option is set to the "Cable" (Cable Television) mode.
If not using Cable TV, set this menu option to the "Air" position.
Lorsque l'appareil sort de l'usine, l'option Signal Type est en mode « Cable » (câblodistribution). Si vous
n'utilisez pas la câblodistribution, sélectionnez l'option « Air ».
PLEASE HAVE THE MODEL NUMBER READY PRIOR TO THE CALL.
SI VOUS DEVEZ COMMUNIQUER AVEC LE SERVICE CLIENTÈLE, PRENEZ NOTE
FOR INFORMATION ON OUR OTHER PRODUCTS, TO ORDER ACCESSORIES ONLINE,
OR FOR RECYCLING INFORMATION, PLEASE VISIT OUR WEBSITE AT
POUR OBTENIR DES INFORMATIONS SUR NOS AUTRES PRODUITS, POUR COMMANDER DES ACCESSOIRES,
Before operating the unit, please read this manual thoroughly.
Avant de faire fonctionner l'appareil, veuillez lire le présent guide attentivement.
ATTENTION
ATTENTION
AIR/CABLE MODE SELECTION
SÉLECTION DU MODE AIR/CABLE
IF CONTACT WITH CUSTOMER SERVICE IS REQUIRED
DU NUMÉRO DE MODÈLE AVANT D'APPELER.
CUSTOMER SERVICE – 1-800-289-0980
SERVICE/SERVICE CLIENTÈLE: 1-800-289-0980
ORION WEBSITE
SITE WEB ORION
OU LE RECYCLAGE, VEUILLEZ VISITER NOTRE SITE WEB:
www.sansuiproducts.com
Advertisement
Table of Contents
Related Manuals for Sansui SLED3200
Summary of Contents for Sansui SLED3200
- Page 1 OWNER’S MANUAL GUIDE D’UTILISATION 32” CLASS LED-LCD HDTV LED-LCD HDTV CATÉGORIE 32 PO SLED3200 SLED3200A ATTENTION ATTENTION If you purchase a universal remote control from your local retailer, please contact the remote manufacturer for the required programming code. Si vous utilisez avec cet appareil une télécommande universelle (autre que celle vendue avec ce téléviseur), consultez la documentation accompagnant la télécommande universelle afin de connaître le code numérique cor-...
-
Page 2: Location Of The Required Marking
The rating sheet and the safety caution are (Part 15): on the rear of the unit. The Sansui SLED3200 and SLED3200A, LED-LCD HDTV complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this... -
Page 3: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS 15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such as vases, should not be placed on the apparatus. 16) An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. - Page 4 IMPORTANT SAFETY INSTRUCTIONS 20) When replacement parts are required, be sure the service technician uses replacement parts specified by the manufacturer or those that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 21) Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.
-
Page 5: Safety Precautions
IMPORTANT SAFETY INSTRUCTIONS CONDENSATION Moisture will form in the operating section of the unit if the unit is brought from cool surroundings into a warm room or if the temperature of the room rises suddenly. When this happens, unit's performance will be impaired. To prevent this, let the unit stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises gradually. -
Page 6: How To Attach The Stand
How to attach the stand NOTE: • Unplug the AC cord from the wall outlet. • Before beginning this process, assure that the TV is laid on a clean, safe, and cushioned surface to avoid any damage to the unit. •... -
Page 7: Features
Features • Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box. • Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for hearing impaired viewers. •... -
Page 8: Table Of Contents
Contents Before using your unit IMPORTANT SAFETY INSTRUCTIONS ...3 SAFETY PRECAUTIONS .........5 How to attach the stand ........6 How to remove the stand ........6 Features ............7 Power source ............7 Contents ............8 Parts and functions ...........9 Remote control ..........10 Antenna connections ........11 Cable TV connections ........11 Connections to other equipment .....12 TV operation... -
Page 9: Parts And Functions
Parts and functions Front Right side INPUT/ENTER button CH (CHANNEL) buttons VOL (VOLUME) +/– buttons, MENU button POWER button Remote sensor To display the menu screen. Press hold VOL (VOLUME) +/– simultaneously about 1 second the menu will be appear. Power Indicator CH (CHANNEL) buttons, VOL (VOLUME) -
Page 10: Remote Control
Remote control 6.CURSOR ▲/▼/◀/▶ Buttons - Use to operate the menu functions of the TV. 7.ENTER Button - Use to enter or select information for On-Screen operations. 8.MUTE Button - To turn off the sound, press this button once. The TV will be silenced and the symbol “Mute”... -
Page 11: Antenna Connections
Antenna connections If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see “Cable TV connections”. Combination VHF/UHF Antenna (Single 75 ohms cable) Connect the 75 ohms cable from the combination Antenna Jack... -
Page 12: Connections To Other Equipment
Connections to other equipment The exact arrangement you use to interconnect various video and audio components to this unit is dependent on the model and features of each component. Check the Owner’s Manual provided with each component for the location of video and audio inputs and outputs. To connect the TV to a VCR To Video/Audio OUT Rear of the unit... -
Page 13: Av Amplifier With Built-In Digital Surround
Connections to other equipment To connect an audio system This connection allows you to use an audio amplifier and external speakers, and adjust the audio level using the TV’s remote control. To control the audio, turn on the TV and the stereo amplifier, and turn off the TV’s built-in speakers (see page 17). Rear of the unit Amplifier To VAR. - Page 14 Connections to other equipment To connect a HDMI or a DVI device to the unit The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device. When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required.
-
Page 15: Tv Operation
Starting setup Adjust the volume level by pressing VOL + or – . The volume level will be indicated on the screen by green bars. As the volume level increases, so The Auto Setup menu appears the first time you do the number of bars. -
Page 16: Quick Guide For Menu Operation
Quick guide for menu Press and release CH . The channel operation automatically stops at the next channel set into memory. For proper operation, before selecting channels, they should be set into the memory. See “Memorizing Call menu and for example: Select Language. channels”... -
Page 17: Convenience Functions
Convenience functions You can change the default settings by pressing the MENU button on your remote, then select the one of the icons at the left of the menu - follow the On-Screen prompts to set your preferences. Icon Selected Items Setup hint Picture Picture... -
Page 18: Memorizing Channels
Memorizing channels Adding Channel If you find a new digital channel unregistered, you can add the new channel into the channel memory. This TV is equipped with a channel memory feature which allows channels to skip up or down Tune in the new channel. to the next channel set into memory, skipping over unwanted channels. -
Page 19: Checking The Digital Signal Strength
Checking the digital Repeat steps 2-3 for other channel. You can signal strength assign a label to each channel. When you finish inputting the label name, press EXIT to return to the normal screen. This TV will allow you to view the digital signal meter for digital channels. -
Page 20: Setting The V-Chip
Setting the V-Chip When you select TV-Y7, TV-PG, TV-14 or TV-MA, press DISPLAY to explain the rating. Genre: An age limitation can be set to restrict children from : Dialogue viewing or hearing violent scenes or pictures that you : Language may choose to exclude. -
Page 21: Closed Caption
NOTE: NOTE: • You can only download the additional V-Chip rating • If the program or video you selected is not closed- system when your TV is receiving a digital signal. captioned, no captions will display on-screen. • When you download the additional rating system, it •... -
Page 22: Setting The Picture Size
Cinema Wide1 (for 4:3 format programs) You can select from among the following items and parameters. To fill the screen, the right and left edges are extended, however; the center of the picture remains Text Size: Auto, Small, Standard, Large near its former ratio. -
Page 23: Time Shift
Time Shift Playback status : (PLAY) (STOP) (PAUSE) You can record a digital program by using the (SKIP+), (SKIP-) USB memory drive. This function is for your Delayed time from the current program convenience, and allows you to pause/record a or Playing time in the play mode. -
Page 24: Reception Disturbances
Reception disturbances Most types of television interference can be remedied by adjusting the height and position of the VHF/UHF antenna. Outdoor antennas are recommended for best results. The most common types of television interference are shown below. If one of these symptoms appear when the TV is connected to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast. -
Page 25: Troubleshooting
Troubleshooting Use the following checklist for troubleshooting if you have problems with your TV. Consult your local dealer or service outlet if problems persist. Be sure all connections are properly made when using with other units. SYMPTOMS POSSIBLE SOLUTIONS SYMPTOMS POSSIBLE SOLUTIONS Digital •... -
Page 26: Specifications
Specifications GENERAL Power supply: AC 120V, 60Hz Power consumption: Operation: 49W Stand by: 0.3W Weight: 6.0 kg (13.2lbs) Dimensions: Width: 732.9 mm (28-55/64 inches) Height: 472.9 mm (18-39/64 inches) Depth: 170 mm (6-45/64 inches) Operating temperature: 5˚C - 40˚C Operating humidity: Less than 80% RH Type: 800.4mmV (32”... -
Page 27: Limited Warranty
limited WARRANTY 32” CLASS LED-LCD HDTV ORION warrants this product to be free from manufacturing defects in material and workmanship under normal use and conditions for a period of 1 year from date of original purchase in the United States. Should service be necessary under this warranty for any reason due to a manufacturing defect or malfunction during the first 12 months from date of original purchase, ORION will provide carry-in service only by an ORION authorized Independent Service Center at no charge.