Restoring Default Settings In The Setup Utility - HP Compaq V3000 Maintenance And Service Manual

Hewlett-packard notebook pc maintenance and service guide
Hide thumbs Also See for V3000:
Table of Contents

Advertisement

Troubleshooting

Restoring Default Settings in the Setup Utility

The following procedure explains how to restore the Setup Utility
default settings. If the computer is not in the Setup Utility, begin
at step 1. If the computer is in the Setup Utility, begin at step 2.
1. To open the Setup Utility, turn on or restart the computer in
Windows, and then press
to enter setup," is displayed in the lower-left corner of the
screen.
2. Select Exit > Load Setup Defaults, and then press
3. When the Setup Confirmation is displayed, press
your preferences.
4. To set your preferences and exit the Setup Utility, press
and then follow the instructions on the screen.
The Setup Utility default settings are set when you exit the
Setup Utility and go into effect when the computer restarts.
Your password, security, and language settings are not changed
when you restore the factory default settings.
2–4
while the prompt, "Press <F10>
f10
Maintenance and Service Guide
.
f10
to save
enter
,
f10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Compaq presario,presario v3000tCompaq presario,presario v3000zCompaq presario,presario v3001Compaq presario,presario v3002Compaq presario,presario v3003Compaq presario,presario v3004 ... Show all

Table of Contents